[Mon Dec 26 10:37:26 2011] Detection parameters:
  Position = (274.0, 129.2) = 5 34 35.27 21 49 56.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 336.9 +/- 32.5
  Background counts = 112.7
  Rate = 0.02 +/- 0.002

[Mon Dec 26 10:37:26 2011] Off-axis axis estimate = 12.40'
[Tue Dec 27 03:02:54 2011] Using EEF radius (= 12.63 ")to estimate initial spatial extent for simple fitting
[Tue Dec 27 03:02:54 2011] Initial guess for spatial extent in simple fitting = 12.63"
[Tue Dec 27 03:02:54 2011] source mask rpix=2.9, npix_max = 46, mask sum = 41, frac = 0.885
[Tue Dec 27 03:02:54 2011] Giving source the simple spatial ID 81 for pass 0, mean size = 12.63"
[Wed Dec 28 10:32:28 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_src81.ximg exists
[Wed Dec 28 10:32:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_src81.csv
[Wed Dec 28 10:32:28 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_src81_1.ximg exists
[Wed Dec 28 10:32:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_src81.csv
[Wed Dec 28 10:32:28 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_src81_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 10:32:33 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_tfrozen_src81.ximg exists
[Wed Dec 28 10:32:33 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_tfrozen_src81_1.ximg exists
[Wed Dec 28 10:32:33 2011] Fit fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_tfrozen_src81 appears to have run properly
[Wed Dec 28 10:34:33 2011] Warning, spatial fit 81 centroid is now closest to src. 34
[Wed Dec 28 10:34:34 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 10:34:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 10:34:34 2011] Assessing source extent using major
[Wed Dec 28 10:34:34 2011] Source does appear to be extended
[Wed Dec 28 10:34:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 10:34:35 2011] Source is confused with source 3
[Thu Dec 29 05:24:34 2011] Using EEF radius (= 12.63 ")to estimate initial spatial extent for simple fitting
[Thu Dec 29 05:24:34 2011] Initial guess for spatial extent in simple fitting = 12.63"
[Thu Dec 29 05:24:34 2011] source mask rpix=2.9, npix_max = 46, mask sum = 41, frac = 0.885
[Thu Dec 29 05:24:34 2011] Giving source the simple spatial ID 68 for pass 1, mean size = 12.63"
[Fri Dec 30 17:13:59 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_src68.ximg exists
[Fri Dec 30 17:13:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_src68.csv
[Fri Dec 30 17:13:59 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_src68_1.ximg exists
[Fri Dec 30 17:13:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_src68.csv
[Fri Dec 30 17:13:59 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_src68_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 17:14:02 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src68.ximg exists
[Fri Dec 30 17:14:02 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src68_1.ximg exists
[Fri Dec 30 17:14:02 2011] Fit fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src68 appears to have run properly
[Fri Dec 30 17:15:15 2011] Warning: source 68 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 132 at 10.801713 pixels away
[Fri Dec 30 17:15:16 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 17:15:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 17:15:16 2011] Assessing source extent using major
[Fri Dec 30 17:15:16 2011] Source does appear to be extended
[Fri Dec 30 17:15:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 31 00:18:37 2011] XMMSAS src. selection expression = ellipse(23785.336914, 11189.082748, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Dec 31 00:18:37 2011] Writing source region out to fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src132_src.reg
[Sat Dec 31 00:18:37 2011] Extracting stamp from image fullrun_mos2_xmm0611180601_pi300-10000_cl_sm2.00.img.gz, (236, 92) - (311, 167)
[Sat Dec 31 00:18:37 2011] XMMSAS bgd. selection expression = annulus(23785.336914, 11189.082748, 1087.500000, 2175.000000, X, Y) && !ellipse(24232.337646, 10913.582970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24156.786133, 9953.796516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24510.554000, 12695.954000, 1140.992033, 1140.992033, 0.000000, X, Y) && !ellipse(24379.897400, 11327.522000, 1187.856034, 1187.856034, 0.000000, X, Y) && !ellipse(24150.297241, 8479.828461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24302.111816, 12325.116684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24242.424000, 8096.262800, 1422.536041, 1422.536041, 0.000000, X, Y) && !ellipse(23424.206800, 10408.574000, 705.552020, 705.552020, 0.000000, X, Y) && !ellipse(24765.340200, 15335.280000, 2426.368070, 2426.368070, 0.000000, X, Y) && !ellipse(23797.088074, 12909.750153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23865.972809, 13261.299927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24369.626000, 13751.544000, 1838.592053, 407.232812, 90.144300, X, Y) && !ellipse(23597.687800, 11968.318000, 839.288024, 839.288024, 0.000000, X, Y) && !ellipse(23826.221710, 12482.563904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23861.368988, 14042.856918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22987.010000, 8833.604000, 2115.264061, 2115.264061, 0.000000, X, Y) && !ellipse(23537.659851, 9789.484718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24468.260000, 8244.030000, 1509.264043, 1509.264043, 0.000000, X, Y)
[Sat Dec 31 00:18:37 2011] Writing fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src132.gif
[Sat Dec 31 03:28:38 2011] Mean detx,y = (-23.36, 13202.04) 
[Sat Dec 31 03:28:41 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 31 03:29:00 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 31 03:29:01 2011] Setting source spectrum file to fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src132_src_b10.pi.gz
[Sat Dec 31 03:29:01 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src132_bgd.pi.gz
[Sat Dec 31 08:10:53 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Dec 31 08:10:53 2011] rmf not generated due to insufficient counts
[Sat Dec 31 09:27:30 2011] Updating aperture counts using extracted products
[Sat Dec 31 09:27:30 2011] Error reading totcts from fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src132_src_b10.pi.gz
[Sat Dec 31 09:27:35 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 31 09:27:35 2011] Using photon index=1.80, rate=0.0225, arf fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src132.arf
[Sat Dec 31 09:27:35 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 31 09:27:35 2011] Updating source flux to 7.2e-13
[Sat Dec 31 09:38:05 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting