[Mon Dec 26 10:37:25 2011] Detection parameters:
  Position = (274.7, 157.0) = 5 34 35.04 21 52 6.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 429.1 +/- 35.6
  Background counts = 216.4
  Rate = 0.03 +/- 0.002

[Mon Dec 26 10:37:26 2011] Off-axis axis estimate = 10.40'
[Tue Dec 27 03:02:54 2011] Using EEF radius (= 11.63 ")to estimate initial spatial extent for simple fitting
[Tue Dec 27 03:02:54 2011] Initial guess for spatial extent in simple fitting = 11.63"
[Tue Dec 27 03:02:54 2011] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.894
[Tue Dec 27 03:02:54 2011] Giving source the simple spatial ID 64 for pass 0, mean size = 11.63"
[Wed Dec 28 10:32:28 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_src64.ximg exists
[Wed Dec 28 10:32:28 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_src64_1.ximg exists
[Wed Dec 28 10:32:28 2011] Fit fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_src64 appears to have run properly
[Wed Dec 28 10:32:32 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_tfrozen_src64.ximg exists
[Wed Dec 28 10:32:32 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_tfrozen_src64_1.ximg exists
[Wed Dec 28 10:32:32 2011] Fit fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_tfrozen_src64 appears to have run properly
[Wed Dec 28 10:34:33 2011] Source 128 is offset by -8.943112 and 1.394174 pixels which is larger than
2 X fitted extent = 4.027287 x 4.027287, not incorporating fit results
[Wed Dec 28 10:34:33 2011] Warning, spatial fit 64 centroid is now closest to src. 28
[Wed Dec 28 10:34:34 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 10:34:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 10:34:34 2011] Assessing source extent using major
[Wed Dec 28 10:34:34 2011] Source does appear to be extended
[Wed Dec 28 10:34:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 10:34:35 2011] Source is confused with source 129
[Thu Dec 29 05:24:34 2011] Using EEF radius (= 11.63 ")to estimate initial spatial extent for simple fitting
[Thu Dec 29 05:24:34 2011] Initial guess for spatial extent in simple fitting = 11.63"
[Thu Dec 29 05:24:34 2011] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.894
[Thu Dec 29 05:24:34 2011] Giving source the simple spatial ID 53 for pass 1, mean size = 11.63"
[Fri Dec 30 17:13:58 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_src53.ximg exists
[Fri Dec 30 17:13:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_src53.csv
[Fri Dec 30 17:13:58 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_src53_1.ximg exists
[Fri Dec 30 17:13:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_src53.csv
[Fri Dec 30 17:13:58 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 17:14:01 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src53.ximg exists
[Fri Dec 30 17:14:01 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists
[Fri Dec 30 17:14:01 2011] Fit fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src53 appears to have run properly
[Fri Dec 30 17:15:15 2011] Spatial fit model total counts = 5488.210000, observed total counts = 5481.000000
[Fri Dec 30 17:15:15 2011] Offset between fit and detection position for source 128 = 6.174630 pixels
[Fri Dec 30 17:15:15 2011] Warning, changing simple spatial fit ID from 53 to 52
[Fri Dec 30 17:15:15 2011] 5290.610000 total counts/ 4984.390000 bgd. counts: snr = 4.337381
Spatial fit parameters:
  Offset between fit and detection position for source 128 = 6.174630 pixels
  Position = (280.7, 158.6) = 5 34 33.17 21 52 8.0
  Extent = 23.0 (21.9-23.5)" x 5.1 (4.1-6.5)", rotation angle = 90 (79-97) degrees
  Source counts = 306.2 +/- 72.7
  Background counts = 4984.4
  Rate = 0.02 +/- 0.005
[Fri Dec 30 17:15:16 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 17:15:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 17:15:16 2011] Assessing source extent using major axis lower bound
[Fri Dec 30 17:15:16 2011] Source does appear to be extended
[Fri Dec 30 17:15:16 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 3.36
[Fri Dec 30 17:15:16 2011] Source is asymmetric
[Sat Dec 31 00:18:36 2011] XMMSAS src. selection expression = ellipse(24369.626000, 13751.544000, 1378.944040, 305.424609, 90.144300, X, Y)
[Sat Dec 31 00:18:36 2011] Writing source region out to fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src128_src.reg
[Sat Dec 31 00:18:36 2011] Extracting stamp from image fullrun_mos2_xmm0611180601_pi300-10000_cl_sm2.00.img.gz, (201, 79) - (360, 238)
[Sat Dec 31 00:18:36 2011] XMMSAS bgd. selection expression = annulus(24369.626000, 13751.544000, 2298.240066, 4596.480132, X, Y) && !ellipse(24731.540400, 17435.082000, 567.880816, 567.880816, 0.000000, X, Y) && !ellipse(23982.828613, 17378.274643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24602.846000, 16885.512000, 575.788817, 575.788817, 0.000000, X, Y) && !ellipse(23181.508878, 17451.473980, 1401.968040, 1401.968040, 0.000000, X, Y) && !ellipse(25689.529236, 17448.794876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21917.250336, 17465.733963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24232.337646, 10913.582970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24156.786133, 9953.796516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24510.554000, 12695.954000, 1140.992033, 1140.992033, 0.000000, X, Y) && !ellipse(27416.044000, 17393.196600, 1256.424036, 1256.424036, 0.000000, X, Y) && !ellipse(24379.897400, 11327.522000, 1187.856034, 1187.856034, 0.000000, X, Y) && !ellipse(24150.297241, 8479.828461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24302.111816, 12325.116684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24416.713501, 14310.912659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23717.363600, 15765.182400, 1181.776034, 1181.776034, 0.000000, X, Y) && !ellipse(24242.424000, 8096.262800, 1422.536041, 1422.536041, 0.000000, X, Y) && !ellipse(20069.369858, 17677.387589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23424.206800, 10408.574000, 705.552020, 705.552020, 0.000000, X, Y) && !ellipse(24765.340200, 15335.280000, 2426.368070, 2426.368070, 0.000000, X, Y) && !ellipse(23797.088074, 12909.750153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23733.048200, 14418.138000, 860.400025, 860.400025, 0.000000, X, Y) && !ellipse(23865.972809, 13261.299927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26261.706635, 16610.549026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23597.687800, 11968.318000, 839.288024, 839.288024, 0.000000, X, Y) && !ellipse(23826.221710, 12482.563904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24685.642000, 15899.136000, 2423.488070, 2423.488070, 0.000000, X, Y) && !ellipse(23861.368988, 14042.856918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22987.010000, 8833.604000, 2115.264061, 2115.264061, 0.000000, X, Y) && !ellipse(21551.072678, 17615.188217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23785.336914, 11189.082748, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23537.659851, 9789.484718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24468.260000, 8244.030000, 1509.264043, 1509.264043, 0.000000, X, Y) && !ellipse(22779.582611, 17428.967117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26618.808000, 17480.132000, 730.814421, 730.814421, 0.000000, X, Y) && !ellipse(22960.814000, 16058.788600, 639.865618, 639.865618, 0.000000, X, Y)
[Sat Dec 31 00:18:36 2011] Writing fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src128.gif
[Sat Dec 31 02:48:19 2011] Mean detx,y = (345.46, 10613.24) 
[Sat Dec 31 02:48:21 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 31 02:49:03 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 31 02:49:03 2011] Setting source spectrum file to fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src128_src_b10.pi.gz
[Sat Dec 31 02:49:03 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src128_bgd.pi.gz
[Sat Dec 31 09:27:28 2011] Updating aperture counts using extracted products
[Sat Dec 31 09:27:28 2011] Error reading totcts from fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src128_src_b10.pi.gz
[Sat Dec 31 09:27:34 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 31 09:27:34 2011] Using photon index=1.80, rate=0.0205, arf fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src128.arf
[Sat Dec 31 09:27:34 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 31 09:27:34 2011] Updating source flux to 8.3e-13
[Sat Dec 31 09:38:05 2011] Flag b found in src. 128 procflags, skipping spectral fitting
[Sat Dec 31 09:38:05 2011] Flag c found in src. 128 procflags, skipping spectral fitting