[Mon Dec 26 10:37:25 2011] Detection parameters:
  Position = (293.4, 177.0) = 5 34 29.19 21 53 27.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 211.4 +/- 30.7
  Background counts = 317.6
  Rate = 0.02 +/- 0.004

[Mon Dec 26 10:37:26 2011] Off-axis axis estimate = 8.81'
[Tue Dec 27 03:02:54 2011] Using EEF radius (= 10.84 ")to estimate initial spatial extent for simple fitting
[Tue Dec 27 03:02:54 2011] Initial guess for spatial extent in simple fitting = 10.84"
[Tue Dec 27 03:02:54 2011] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.006
[Tue Dec 27 03:02:54 2011] Giving source the simple spatial ID 76 for pass 0, mean size = 10.84"
[Wed Dec 28 10:32:28 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_src76.ximg exists
[Wed Dec 28 10:32:28 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_src76_1.ximg exists
[Wed Dec 28 10:32:28 2011] Fit fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_src76 appears to have run properly
[Wed Dec 28 10:32:32 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_tfrozen_src76.ximg exists
[Wed Dec 28 10:32:32 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_tfrozen_src76_1.ximg exists
[Wed Dec 28 10:32:32 2011] Fit fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_tfrozen_src76 appears to have run properly
[Wed Dec 28 10:34:32 2011] Source 125 is offset by 1.704184 and 9.265601 pixels which is larger than
2 X fitted extent = 1.336584 x 1.336584, not incorporating fit results
[Wed Dec 28 10:34:33 2011] Spatial fit model total counts = 5004.260000, observed total counts = 4995.000000
[Wed Dec 28 10:34:33 2011] Offset between fit and detection position for source 125 = 8.464797 pixels
[Wed Dec 28 10:34:33 2011] 4728.382000 total counts/ 3876.830000 bgd. counts: snr = 13.676431
Spatial fit parameters:
  Offset between fit and detection position for source 125 = 8.464797 pixels
  Position = (286.4, 181.7) = 5 34 31.38 21 53 48.4
  Extent = 21.6 (21.4-21.7)", rotation angle = 0
  Source counts = 851.6 +/- 68.8
  Background counts = 3876.8
  Rate = 0.06 +/- 0.005
[Wed Dec 28 10:34:34 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 10:34:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 10:34:34 2011] Assessing source extent using major axis lower bound
[Wed Dec 28 10:34:34 2011] Source does appear to be extended
[Wed Dec 28 10:34:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 10:34:35 2011] Source is confused with source 25
[Thu Dec 29 05:24:34 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Dec 29 05:24:34 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Dec 29 05:24:34 2011] Initial guess for spatial extent in simple fitting = 21.59"
[Thu Dec 29 05:24:34 2011] source mask rpix=5.0, npix_max = 119, mask sum = 121, frac = 1.014
[Thu Dec 29 05:24:34 2011] Giving source the simple spatial ID 63 for pass 1, mean size = 21.59"
[Fri Dec 30 17:13:58 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_src63.ximg exists
[Fri Dec 30 17:13:58 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_src63.csv
[Fri Dec 30 17:13:58 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_src63_1.ximg exists
[Fri Dec 30 17:13:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_src63.csv
[Fri Dec 30 17:13:59 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 17:14:02 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src63.ximg exists
[Fri Dec 30 17:14:02 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src63_1.ximg exists
[Fri Dec 30 17:14:02 2011] Fit fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src63 appears to have run properly
[Fri Dec 30 17:15:15 2011] Spatial fit model total counts = 10513.300000, observed total counts = 10515.000000
[Fri Dec 30 17:15:15 2011] Offset between fit and detection position for source 125 = 2.630631 pixels
[Fri Dec 30 17:15:15 2011] Warning, changing simple spatial fit ID from 63 to 10
[Fri Dec 30 17:15:15 2011] 10052.330000 total counts/ 7159.310000 bgd. counts: snr = 34.191319
Spatial fit parameters:
  Offset between fit and detection position for source 125 = 2.630631 pixels
  Position = (284.3, 183.3) = 5 34 32.04 21 53 55.4
  Extent = 30.3 (30.2-60.6)", rotation angle = 0
  Source counts = 2893.0 +/- 100.3
  Background counts = 7159.3
  Rate = 0.2 +/- 0.007
[Fri Dec 30 17:15:16 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 17:15:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 17:15:16 2011] Assessing source extent using major axis lower bound
[Fri Dec 30 17:15:16 2011] Source does appear to be extended
[Fri Dec 30 17:15:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 31 00:18:37 2011] Counts = 2893.020000, rescaling region sizes by 2.000000
[Sat Dec 31 00:18:37 2011] XMMSAS src. selection expression = ellipse(24685.642000, 15899.136000, 3635.232105, 3635.232105, 0.000000, X, Y)
[Sat Dec 31 00:18:37 2011] Writing source region out to fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src125_src.reg
[Sat Dec 31 00:18:37 2011] Extracting stamp from image fullrun_mos2_xmm0611180601_pi300-10000_cl_sm2.00.img.gz, (75, 0) - (493, 392)
[Sat Dec 31 00:18:37 2011] XMMSAS bgd. selection expression = annulus(24685.642000, 15899.136000, 12117.440349, 24234.880697, X, Y) && !ellipse(32766.552307, 27952.739929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24731.540400, 17435.082000, 567.880816, 567.880816, 0.000000, X, Y) && !ellipse(23982.828613, 17378.274643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25557.082800, 31450.983200, 1648.320047, 712.525621, 7.649290, X, Y) && !ellipse(31503.504425, 22488.931244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24602.846000, 16885.512000, 575.788817, 575.788817, 0.000000, X, Y) && !ellipse(24278.353800, 31473.056400, 1648.320047, 677.736820, 2.653500, X, Y) && !ellipse(23181.508878, 17451.473980, 1401.968040, 1401.968040, 0.000000, X, Y) && !ellipse(25689.529236, 17448.794876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21917.250336, 17465.733963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31775.500000, 24906.700000, 1440.480041, 1440.480041, 0.000000, X, Y) && !ellipse(26225.938080, 32833.374084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17571.842000, 21877.118000, 1625.140519, 1625.140519, 0.000000, X, Y) && !ellipse(23795.998000, 31525.263600, 1440.760041, 1440.760041, 0.000000, X, Y) && !ellipse(31570.217346, 24562.878174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24232.337646, 10913.582970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24156.786133, 9953.796516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26164.788400, 31414.006600, 1399.360040, 1399.360040, 0.000000, X, Y) && !ellipse(31785.720764, 25784.000488, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24510.554000, 12695.954000, 1140.992033, 1140.992033, 0.000000, X, Y) && !ellipse(31664.452301, 27012.012604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27416.044000, 17393.196600, 1256.424036, 1256.424036, 0.000000, X, Y) && !ellipse(24379.897400, 11327.522000, 1187.856034, 1187.856034, 0.000000, X, Y) && !ellipse(24150.297241, 8479.828461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23363.130000, 31344.942000, 1479.032043, 1479.032043, 0.000000, X, Y) && !ellipse(17999.428040, 26475.794922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31697.953461, 24042.699524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31405.406403, 21960.369339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24302.111816, 12325.116684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24416.713501, 14310.912659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25653.548000, 33347.220000, 1302.664037, 1302.664037, 0.000000, X, Y) && !ellipse(27022.181000, 31400.967800, 1405.848040, 1405.848040, 0.000000, X, Y) && !ellipse(22473.986084, 32480.000305, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23717.363600, 15765.182400, 1181.776034, 1181.776034, 0.000000, X, Y) && !ellipse(31545.143250, 20563.010162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31673.872345, 26228.139099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32066.373291, 25302.818909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24242.424000, 8096.262800, 1422.536041, 1422.536041, 0.000000, X, Y) && !ellipse(23832.858600, 32687.187600, 1705.904049, 1705.904049, 0.000000, X, Y) && !ellipse(31752.617859, 28234.725281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23695.430000, 32447.302000, 857.744025, 857.744025, 0.000000, X, Y) && !ellipse(20069.369858, 17677.387589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23424.206800, 10408.574000, 705.552020, 705.552020, 0.000000, X, Y) && !ellipse(24765.340200, 15335.280000, 2426.368070, 2426.368070, 0.000000, X, Y) && !ellipse(23797.088074, 12909.750153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31944.101227, 20142.469452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26730.914000, 31925.156000, 1462.776042, 1462.776042, 0.000000, X, Y) && !ellipse(27894.550000, 31357.128800, 1419.368041, 1419.368041, 0.000000, X, Y) && !ellipse(20290.264313, 31704.880432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23733.048200, 14418.138000, 860.400025, 860.400025, 0.000000, X, Y) && !ellipse(23865.972809, 13261.299927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24369.626000, 13751.544000, 1838.592053, 407.232812, 90.144300, X, Y) && !ellipse(26261.706635, 16610.549026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25312.546936, 34047.728729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24504.238000, 33597.600000, 1218.368035, 1218.368035, 0.000000, X, Y) && !ellipse(27040.404000, 31857.876000, 1370.104039, 1370.104039, 0.000000, X, Y) && !ellipse(17860.665588, 23739.057098, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21237.878000, 31673.002000, 1541.680044, 1541.680044, 0.000000, X, Y) && !ellipse(23597.687800, 11968.318000, 839.288024, 839.288024, 0.000000, X, Y) && !ellipse(32788.746000, 20072.640000, 1250.328036, 365.852811, 49.479800, X, Y) && !ellipse(23826.221710, 12482.563904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23861.368988, 14042.856918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17745.278015, 24920.930115, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22987.010000, 8833.604000, 2115.264061, 2115.264061, 0.000000, X, Y) && !ellipse(21551.072678, 17615.188217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31142.608948, 20045.284760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23785.336914, 11189.082748, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17783.435800, 25448.964000, 1004.480029, 1004.480029, 0.000000, X, Y) && !ellipse(28490.272000, 31284.657200, 1426.120041, 1426.120041, 0.000000, X, Y) && !ellipse(32151.028900, 20491.852722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23537.659851, 9789.484718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32574.960083, 22405.234100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24468.260000, 8244.030000, 1509.264043, 1509.264043, 0.000000, X, Y) && !ellipse(33217.136000, 21234.892800, 1343.432039, 1343.432039, 0.000000, X, Y) && !ellipse(27524.781067, 32051.486542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17759.489059, 28652.510071, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22779.582611, 17428.967117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25312.000000, 34576.613220, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17495.658200, 21186.070000, 1689.524104, 1689.524104, 0.000000, X, Y) && !ellipse(29465.310289, 31190.991292, 3018.512087, 1200.625624, 7.815578, X, Y) && !ellipse(31584.907623, 28730.671478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17802.609200, 28211.468000, 1602.104046, 1602.104046, 0.000000, X, Y) && !ellipse(23562.120636, 7822.903854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18003.998672, 23103.854614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19864.284000, 31891.938000, 1584.272046, 1040.072030, -0.000000, X, Y) && !ellipse(22089.988000, 32847.606000, 1522.704044, 1522.704044, 0.000000, X, Y) && !ellipse(26618.808000, 17480.132000, 730.814421, 730.814421, 0.000000, X, Y) && !ellipse(17873.498672, 27791.646027, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32028.573639, 19478.364319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28942.996000, 31311.115400, 1455.920042, 1455.920042, 0.000000, X, Y) && !ellipse(33224.398834, 22526.168030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33045.359589, 24558.205322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18225.495819, 30058.217987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17189.369308, 25091.651154, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31991.105865, 18979.579895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22960.814000, 16058.788600, 639.865618, 639.865618, 0.000000, X, Y) && !ellipse(30505.247925, 31188.280762, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26046.598816, 38661.447479, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Dec 31 00:18:37 2011] Writing fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src125.gif
[Sat Dec 31 03:10:54 2011] Mean detx,y = (425.27, 8805.71) 
[Sat Dec 31 03:11:00 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 31 03:24:01 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 31 03:24:01 2011] Setting source spectrum file to fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src125_src_b10.pi.gz
[Sat Dec 31 03:24:01 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src125_bgd.pi.gz
[Sat Dec 31 09:27:29 2011] Updating aperture counts using extracted products
[Sat Dec 31 09:27:29 2011] Error reading totcts from fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src125_src_b10.pi.gz
[Sat Dec 31 09:27:35 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 31 09:27:35 2011] Using photon index=1.80, rate=0.194, arf fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src125.arf
[Sat Dec 31 09:27:35 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 31 09:27:35 2011] Updating source flux to 3.4e-12
[Sat Dec 31 09:38:05 2011] Flag b found in src. 125 procflags, skipping spectral fitting
[Sat Dec 31 09:38:05 2011] Flag c found in src. 125 procflags, skipping spectral fitting