[Mon Dec 26 10:37:24 2011] Detection parameters:
  Position = (248.3, 203.0) = 5 34 43.30 21 55 27.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 348.0 +/- 27.1
  Background counts = 388.2
  Rate = 0.02 +/- 0.002

[Mon Dec 26 10:37:26 2011] Off-axis axis estimate = 7.81'
[Tue Dec 27 03:02:54 2011] Using EEF radius (= 10.34 ")to estimate initial spatial extent for simple fitting
[Tue Dec 27 03:02:54 2011] Initial guess for spatial extent in simple fitting = 10.34"
[Tue Dec 27 03:02:54 2011] source mask rpix=2.4, npix_max = 33, mask sum = 27, frac = 0.816
[Tue Dec 27 03:02:54 2011] Giving source the simple spatial ID 80 for pass 0, mean size = 10.34"
[Wed Dec 28 10:32:28 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_src80.ximg exists
[Wed Dec 28 10:32:28 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_src80_1.ximg exists
[Wed Dec 28 10:32:28 2011] Fit fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_src80 appears to have run properly
[Wed Dec 28 10:32:32 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_tfrozen_src80.ximg exists
[Wed Dec 28 10:32:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_tfrozen_src80.csv
[Wed Dec 28 10:32:32 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_tfrozen_src80_1.ximg exists
[Wed Dec 28 10:32:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_tfrozen_src80.csv
[Wed Dec 28 10:32:33 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_tfrozen_src80_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_tfrozen_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 10:34:32 2011] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 117 at 11.998873 pixels away
[Wed Dec 28 10:34:33 2011] Warning, spatial fit 80 centroid is now closest to src. 116
[Wed Dec 28 10:34:34 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 10:34:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 10:34:34 2011] Assessing source extent using major
[Wed Dec 28 10:34:34 2011] Source does appear to be extended
[Wed Dec 28 10:34:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 10:34:35 2011] Source is confused with source 116
[Thu Dec 29 05:24:34 2011] Using EEF radius (= 10.34 ")to estimate initial spatial extent for simple fitting
[Thu Dec 29 05:24:34 2011] Initial guess for spatial extent in simple fitting = 10.34"
[Thu Dec 29 05:24:34 2011] source mask rpix=2.4, npix_max = 33, mask sum = 27, frac = 0.816
[Thu Dec 29 05:24:34 2011] Giving source the simple spatial ID 67 for pass 1, mean size = 10.34"
[Fri Dec 30 17:13:59 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_src67.ximg exists
[Fri Dec 30 17:13:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_src67.csv
[Fri Dec 30 17:13:59 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_src67_1.ximg exists
[Fri Dec 30 17:13:59 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_src67.csv
[Fri Dec 30 17:13:59 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 17:14:02 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src67.ximg exists
[Fri Dec 30 17:14:02 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src67_1.ximg exists
[Fri Dec 30 17:14:02 2011] Fit fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src67 appears to have run properly
[Fri Dec 30 17:15:15 2011] Warning, spatial fit 67 centroid is now closest to src. 115
[Fri Dec 30 17:15:16 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 17:15:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 17:15:16 2011] Assessing source extent using major
[Fri Dec 30 17:15:16 2011] Source does appear to be extended
[Fri Dec 30 17:15:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 31 00:18:37 2011] XMMSAS src. selection expression = ellipse(21551.072678, 17615.188217, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Dec 31 00:18:37 2011] Writing source region out to fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src117_src.reg
[Sat Dec 31 00:18:37 2011] Extracting stamp from image fullrun_mos2_xmm0611180601_pi300-10000_cl_sm2.00.img.gz, (211, 166) - (286, 241)
[Sat Dec 31 00:18:37 2011] XMMSAS bgd. selection expression = annulus(21551.072678, 17615.188217, 1087.500000, 2175.000000, X, Y) && !ellipse(23982.828613, 17378.274643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23181.508878, 17451.473980, 1401.968040, 1401.968040, 0.000000, X, Y) && !ellipse(21917.250336, 17465.733963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23717.363600, 15765.182400, 1181.776034, 1181.776034, 0.000000, X, Y) && !ellipse(20069.369858, 17677.387589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24765.340200, 15335.280000, 2426.368070, 2426.368070, 0.000000, X, Y) && !ellipse(24369.626000, 13751.544000, 1838.592053, 407.232812, 90.144300, X, Y) && !ellipse(24685.642000, 15899.136000, 2423.488070, 2423.488070, 0.000000, X, Y) && !ellipse(22779.582611, 17428.967117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22960.814000, 16058.788600, 639.865618, 639.865618, 0.000000, X, Y)
[Sat Dec 31 00:18:37 2011] Writing fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src117.gif
[Sat Dec 31 03:27:22 2011] Mean detx,y = (-2686.98, 7052.23) 
[Sat Dec 31 03:27:24 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 31 03:27:46 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 31 03:27:46 2011] Setting source spectrum file to fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src117_src_b10.pi.gz
[Sat Dec 31 03:27:46 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src117_bgd.pi.gz
[Sat Dec 31 08:10:32 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Dec 31 08:10:32 2011] rmf not generated due to insufficient counts
[Sat Dec 31 09:27:29 2011] Updating aperture counts using extracted products
[Sat Dec 31 09:27:30 2011] Error reading totcts from fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src117_src_b10.pi.gz
[Sat Dec 31 09:27:35 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 31 09:27:35 2011] Using photon index=1.80, rate=0.0233, arf fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src117.arf
[Sat Dec 31 09:27:35 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 31 09:27:35 2011] Updating source flux to 4.5e-13
[Sat Dec 31 09:38:05 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting