[Mon Dec 26 10:37:23 2011] Detection parameters:
  Position = (375.0, 258.1) = 5 34 3.68 21 59 21.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 184.4 +/- 31.7
  Background counts = 408.6
  Rate = 0.02 +/- 0.003

[Mon Dec 26 10:37:26 2011] Off-axis axis estimate = 6.27'
[Tue Dec 27 03:02:54 2011] Using EEF radius (= 9.57 ")to estimate initial spatial extent for simple fitting
[Tue Dec 27 03:02:54 2011] Initial guess for spatial extent in simple fitting = 9.57"
[Tue Dec 27 03:02:54 2011] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.236
[Tue Dec 27 03:02:54 2011] Giving source the simple spatial ID 88 for pass 0, mean size = 9.57"
[Wed Dec 28 10:32:28 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_src88.ximg exists
[Wed Dec 28 10:32:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_src88.csv
[Wed Dec 28 10:32:28 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_src88_1.ximg exists
[Wed Dec 28 10:32:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_src88.csv
[Wed Dec 28 10:32:28 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_src88_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_src88.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 10:32:33 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_tfrozen_src88.ximg exists
[Wed Dec 28 10:32:33 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_tfrozen_src88_1.ximg exists
[Wed Dec 28 10:32:33 2011] Fit fullrun_mos2_xmm0611180601_pi300-10000_cl_pass0_tfrozen_src88 appears to have run properly
[Wed Dec 28 10:34:34 2011] Warning, spatial fit 88 centroid is now closest to src. 96
[Wed Dec 28 10:34:34 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 10:34:34 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 10:34:34 2011] Assessing source extent using major
[Wed Dec 28 10:34:34 2011] Source does appear to be extended
[Wed Dec 28 10:34:34 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 10:34:35 2011] Source is confused with source 97
[Thu Dec 29 05:24:34 2011] Using EEF radius (= 9.57 ")to estimate initial spatial extent for simple fitting
[Thu Dec 29 05:24:34 2011] Initial guess for spatial extent in simple fitting = 9.57"
[Thu Dec 29 05:24:34 2011] source mask rpix=2.2, npix_max = 29, mask sum = 36, frac = 1.236
[Thu Dec 29 05:24:34 2011] Giving source the simple spatial ID 75 for pass 1, mean size = 9.57"
[Fri Dec 30 17:13:59 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_src75.ximg exists
[Fri Dec 30 17:13:59 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_src75_1.ximg exists
[Fri Dec 30 17:13:59 2011] Fit fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_src75 appears to have run properly
[Fri Dec 30 17:14:02 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src75.ximg exists
[Fri Dec 30 17:14:02 2011] fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src75_1.ximg exists
[Fri Dec 30 17:14:02 2011] Fit fullrun_mos2_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src75 appears to have run properly
[Fri Dec 30 17:15:16 2011] Source 100 is offset by 5.521265 and -0.557258 pixels which is larger than
2 X fitted extent = 3.767196 x 3.767196, not incorporating fit results
[Fri Dec 30 17:15:16 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 17:15:16 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 17:15:16 2011] Assessing source extent using major
[Fri Dec 30 17:15:16 2011] Source does appear to be extended
[Fri Dec 30 17:15:16 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 31 00:18:38 2011] XMMSAS src. selection expression = ellipse(32574.960083, 22405.234100, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Dec 31 00:18:38 2011] Writing source region out to fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src100_src.reg
[Sat Dec 31 00:18:38 2011] Extracting stamp from image fullrun_mos2_xmm0611180601_pi300-10000_cl_sm2.00.img.gz, (337, 221) - (412, 296)
[Sat Dec 31 00:18:38 2011] XMMSAS bgd. selection expression = annulus(32574.960083, 22405.234100, 1087.500000, 2175.000000, X, Y) && !ellipse(31503.504425, 22488.931244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31775.500000, 24906.700000, 1440.480041, 1440.480041, 0.000000, X, Y) && !ellipse(31570.217346, 24562.878174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31697.953461, 24042.699524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31405.406403, 21960.369339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31545.143250, 20563.010162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32066.373291, 25302.818909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31944.101227, 20142.469452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32788.746000, 20072.640000, 1250.328036, 365.852811, 49.479800, X, Y) && !ellipse(31142.608948, 20045.284760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32151.028900, 20491.852722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33217.136000, 21234.892800, 1343.432039, 1343.432039, 0.000000, X, Y) && !ellipse(32028.573639, 19478.364319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33224.398834, 22526.168030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33045.359589, 24558.205322, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Dec 31 00:18:38 2011] Writing fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src100.gif
[Sat Dec 31 03:44:19 2011] Mean detx,y = (7996.62, 1523.45) 
[Sat Dec 31 03:44:22 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 31 03:44:35 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 31 03:44:36 2011] Setting source spectrum file to fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src100_src_b10.pi.gz
[Sat Dec 31 03:44:36 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src100_bgd.pi.gz
[Sat Dec 31 08:25:32 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Dec 31 08:25:32 2011] rmf not generated due to insufficient counts
[Sat Dec 31 09:27:30 2011] Updating aperture counts using extracted products
[Sat Dec 31 09:27:30 2011] Error reading totcts from fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src100_src_b10.pi.gz
[Sat Dec 31 09:27:36 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 31 09:27:36 2011] Using photon index=1.80, rate=0.0203, arf fullrun_mos2_xmm0611180601_pi300-10000_pass1_cl_src100.arf
[Sat Dec 31 09:27:36 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 31 09:27:36 2011] Updating source flux to 3.9e-13
[Sat Dec 31 09:38:05 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting