[Mon Dec 26 10:34:22 2011] Detection parameters:
  Position = (276.9, 95.1) = 5 34 34.34 21 47 31.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 280.1 +/- 27.4
  Background counts = 105.8
  Rate = 0.02 +/- 0.002

[Mon Dec 26 10:34:33 2011] Off-axis axis estimate = 14.83'
[Mon Dec 26 10:45:53 2011] Using EEF radius (= 13.84 ")to estimate initial spatial extent for simple fitting
[Mon Dec 26 10:45:53 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Dec 26 10:45:53 2011] Initial guess for spatial extent in simple fitting = 13.84"
[Mon Dec 26 10:45:53 2011] source mask rpix=3.2, npix_max = 54, mask sum = 64, frac = 1.180
[Mon Dec 26 10:45:53 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 13.84"
[Tue Dec 27 03:02:48 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_src6.ximg exists
[Tue Dec 27 03:02:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_src6.csv
[Tue Dec 27 03:02:48 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_src6_1.ximg exists
[Tue Dec 27 03:02:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_src6.csv
[Tue Dec 27 03:02:48 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 27 03:02:51 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Tue Dec 27 03:02:51 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Tue Dec 27 03:02:51 2011] Fit fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Wed Dec 28 10:33:34 2011] Warning, spatial fit 6 centroid is now closest to src. 14
[Wed Dec 28 10:33:35 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 10:33:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 10:33:35 2011] Assessing source extent using major
[Wed Dec 28 10:33:35 2011] Source does appear to be extended
[Wed Dec 28 10:33:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 10:33:35 2011] Source is confused with source 100
[Wed Dec 28 10:33:35 2011] Source is confused with source 101
[Wed Dec 28 10:35:30 2011] Using EEF radius (= 13.84 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 10:35:30 2011] Initial guess for spatial extent in simple fitting = 13.84"
[Wed Dec 28 10:35:30 2011] source mask rpix=3.2, npix_max = 54, mask sum = 64, frac = 1.180
[Wed Dec 28 10:35:30 2011] Giving source the simple spatial ID 8 for pass 1, mean size = 13.84"
[Thu Dec 29 05:24:29 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_src8.ximg exists
[Thu Dec 29 05:24:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_src8.csv
[Thu Dec 29 05:24:29 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_src8_1.ximg exists
[Thu Dec 29 05:24:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_src8.csv
[Thu Dec 29 05:24:29 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 29 05:24:32 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Thu Dec 29 05:24:32 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Thu Dec 29 05:24:32 2011] Fit fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Fri Dec 30 17:14:35 2011] Warning, spatial fit 8 centroid is now closest to src. 14
[Fri Dec 30 17:14:36 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 17:14:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 17:14:36 2011] Assessing source extent using major
[Fri Dec 30 17:14:36 2011] Source does appear to be extended
[Fri Dec 30 17:14:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 17:15:48 2011] XMMSAS src. selection expression = ellipse(24042.795105, 8223.681854, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Dec 30 17:15:48 2011] Writing source region out to fullrun_mos1_xmm0611180601_pi300-10000_pass1_cl_src9_src.reg
[Fri Dec 30 17:15:48 2011] Extracting stamp from image fullrun_mos1_xmm0611180601_pi300-10000_cl_sm2.00.img.gz, (239, 58) - (314, 133)
[Fri Dec 30 17:15:48 2011] XMMSAS bgd. selection expression = annulus(24042.795105, 8223.681854, 1087.500000, 2175.000000, X, Y) && !ellipse(24055.352800, 9581.226000, 1414.848041, 1414.848041, 0.000000, X, Y) && !ellipse(24149.524628, 10827.743217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22839.570000, 7776.900000, 2231.920064, 2231.920064, 0.000000, X, Y) && !ellipse(24428.200000, 11125.840000, 2069.336060, 2069.336060, 0.000000, X, Y) && !ellipse(23589.926758, 11096.264252, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24652.926147, 10301.388969, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24825.704834, 9503.133835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24282.564400, 8529.941200, 1763.512051, 1763.512051, 0.000000, X, Y) && !ellipse(23962.363950, 7792.927400, 2125.136061, 1174.904034, 359.947000, X, Y)
[Fri Dec 30 17:15:48 2011] Writing fullrun_mos1_xmm0611180601_pi300-10000_pass1_cl_src9.gif
[Fri Dec 30 17:56:19 2011] Mean detx,y = (16340.94, -394.85) 
[Fri Dec 30 17:56:23 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 30 17:56:36 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 30 17:56:37 2011] Setting source spectrum file to fullrun_mos1_xmm0611180601_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Fri Dec 30 17:56:37 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0611180601_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Fri Dec 30 21:16:03 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Dec 30 21:16:03 2011] rmf not generated due to insufficient counts
[Sat Dec 31 09:27:16 2011] Updating aperture counts using extracted products
[Sat Dec 31 09:27:16 2011] Error reading totcts from fullrun_mos1_xmm0611180601_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sat Dec 31 09:27:20 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 31 09:27:20 2011] Using photon index=1.80, rate=0.0187, arf fullrun_mos1_xmm0611180601_pi300-10000_pass1_cl_src9.arf
[Sat Dec 31 09:27:20 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 31 09:27:20 2011] Updating source flux to 6.1e-13
[Sat Dec 31 09:27:41 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting