[Mon Dec 26 10:34:22 2011] Detection parameters:
  Position = (361.4, 252.0) = 5 34 7.92 21 58 58.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 321.2 +/- 25.7
  Background counts = 370.6
  Rate = 0.02 +/- 0.002

[Mon Dec 26 10:34:33 2011] Off-axis axis estimate = 5.67'
[Mon Dec 26 10:45:53 2011] Using EEF radius (= 9.27 ")to estimate initial spatial extent for simple fitting
[Mon Dec 26 10:45:53 2011] Initial guess for spatial extent in simple fitting = 9.27"
[Mon Dec 26 10:45:53 2011] source mask rpix=2.1, npix_max = 27, mask sum = 11, frac = 0.398
[Mon Dec 26 10:45:53 2011] Skipping simple spatial due to low active detector fraction
[Wed Dec 28 10:33:35 2011] Spatial fit model total counts = 3977.110000, observed total counts = 4023.000000
[Wed Dec 28 10:33:35 2011] Offset between fit and detection position for source 8 = 3.192785 pixels
[Wed Dec 28 10:33:35 2011] Warning, changing simple spatial fit ID from -1 to 37
[Wed Dec 28 10:33:35 2011] 3803.400000 total counts/ 1314.560000 bgd. counts: snr = 68.644662
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 3.192785 pixels
  Position = (364.3, 250.6) = 5 34 7.02 21 58 48.2
  Extent = 19.0 (19.0-19.0)", rotation angle = 0
  Source counts = 2488.8 +/- 61.7
  Background counts = 1314.6
  Rate = 0.2 +/- 0.004
[Wed Dec 28 10:33:35 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 10:33:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 10:33:35 2011] Assessing source extent using major axis lower bound
[Wed Dec 28 10:33:35 2011] Source does appear to be extended
[Wed Dec 28 10:33:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 10:33:35 2011] Source is confused with source 44
[Wed Dec 28 10:33:35 2011] Source is confused with source 45
[Wed Dec 28 10:33:35 2011] Source is confused with source 47
[Wed Dec 28 10:33:35 2011] Source is confused with source 49
[Wed Dec 28 10:33:35 2011] Source is confused with source 51
[Wed Dec 28 10:35:30 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Dec 28 10:35:30 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Dec 28 10:35:30 2011] Initial guess for spatial extent in simple fitting = 19.04"
[Wed Dec 28 10:35:30 2011] source mask rpix=4.4, npix_max = 95, mask sum = 68, frac = 0.715
[Wed Dec 28 10:35:30 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 19.04"
[Thu Dec 29 05:24:29 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_src7.ximg exists
[Thu Dec 29 05:24:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_src7.csv
[Thu Dec 29 05:24:29 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_src7_1.ximg exists
[Thu Dec 29 05:24:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_src7.csv
[Thu Dec 29 05:24:29 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 29 05:24:32 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Thu Dec 29 05:24:32 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Thu Dec 29 05:24:32 2011] Fit fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Fri Dec 30 17:14:35 2011] Warning, spatial fit 7 centroid is now closest to src. 43
[Fri Dec 30 17:14:35 2011] Source 8 is offset by -3.212740 and 0.442966 pixels which is larger than
2 X fitted extent = 1.710092 x 1.710092, not incorporating fit results
[Fri Dec 30 17:14:36 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 17:14:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 17:14:36 2011] Assessing source extent using major axis lower bound
[Fri Dec 30 17:14:36 2011] Source does appear to be extended
[Fri Dec 30 17:14:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 17:15:47 2011] Counts = 2488.840000, rescaling region sizes by 2.000000
[Fri Dec 30 17:15:47 2011] XMMSAS src. selection expression = ellipse(31646.699600, 21757.730000, 2284.380066, 2284.380066, 0.000000, X, Y)
[Fri Dec 30 17:15:47 2011] Writing source region out to fullrun_mos1_xmm0611180601_pi300-10000_pass1_cl_src8_src.reg
[Fri Dec 30 17:15:47 2011] Extracting stamp from image fullrun_mos1_xmm0611180601_pi300-10000_cl_sm2.00.img.gz, (233, 119) - (496, 382)
[Fri Dec 30 17:15:48 2011] XMMSAS bgd. selection expression = annulus(31646.699600, 21757.730000, 7614.600219, 15229.200438, X, Y) && !ellipse(26147.852000, 17425.869000, 1605.648046, 1605.648046, 0.000000, X, Y) && !ellipse(23193.674255, 17634.774368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24152.600000, 17618.273580, 1592.664046, 1592.664046, 0.000000, X, Y) && !ellipse(24055.352800, 9581.226000, 1414.848041, 1414.848041, 0.000000, X, Y) && !ellipse(31228.230988, 20235.759216, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31605.478790, 24492.822571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31884.392000, 23635.558800, 1489.896043, 1489.896043, 0.000000, X, Y) && !ellipse(24042.795105, 8223.681854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17742.016312, 19472.264389, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22917.665375, 17662.830063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18153.734360, 17067.625595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24149.524628, 10827.743217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31754.654000, 26873.018800, 982.880028, 982.880028, 0.000000, X, Y) && !ellipse(18227.949066, 30318.546265, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17482.002655, 29879.661957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31577.991272, 28663.188599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32886.151000, 28303.394000, 1518.880044, 1518.880044, 0.000000, X, Y) && !ellipse(31540.406677, 27966.843445, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17802.877000, 28518.639000, 1326.456038, 1326.456038, 0.000000, X, Y) && !ellipse(31810.014000, 27734.760000, 3037.760087, 3037.760087, 0.000000, X, Y) && !ellipse(32402.359283, 27439.055481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17744.951400, 27215.264600, 1588.216046, 1588.216046, 0.000000, X, Y) && !ellipse(32490.161102, 26660.924805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17940.847473, 26309.316620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31490.850555, 25884.018097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31782.946259, 25354.820312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17557.147949, 25361.338409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17696.701599, 24394.801544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17916.997345, 23964.354919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17877.980362, 23512.293701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17139.629990, 23514.946075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32347.798431, 23364.161652, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17789.481598, 23013.865051, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31440.248352, 22494.063416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32361.755920, 22321.637848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17580.959800, 21819.060800, 1489.896043, 755.517622, 90.000000, X, Y) && !ellipse(31830.819092, 21443.518768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17331.239471, 21067.522812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31614.054000, 20667.212800, 1581.264046, 1581.264046, 0.000000, X, Y) && !ellipse(22839.570000, 7776.900000, 2231.920064, 2231.920064, 0.000000, X, Y) && !ellipse(32096.420258, 20390.380157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17428.848200, 19576.552000, 1727.440050, 1727.440050, 0.000000, X, Y) && !ellipse(18866.598000, 17860.548000, 1230.952035, 1230.952035, 0.000000, X, Y) && !ellipse(20452.728210, 17775.522781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19993.210400, 17636.423400, 2639.264076, 2639.264076, 0.000000, X, Y) && !ellipse(27886.130554, 17398.584290, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26684.376678, 17293.515488, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21710.958542, 17666.694458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18893.438797, 17164.819580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23329.996735, 16916.612839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21143.740738, 16849.813629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18485.368759, 17453.757126, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20767.890808, 17178.761139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20969.793839, 17743.537643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24737.727783, 16050.195801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19195.388000, 16374.470000, 1849.624053, 1849.624053, 0.000000, X, Y) && !ellipse(18963.337000, 16053.336800, 1466.944042, 1466.944042, 0.000000, X, Y) && !ellipse(18563.910000, 15729.078800, 1877.880054, 1877.880054, 0.000000, X, Y) && !ellipse(24268.926400, 15818.409400, 1706.672049, 673.704819, 83.221000, X, Y) && !ellipse(23770.829834, 15627.345215, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24962.754791, 15624.605225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18236.466000, 15208.072000, 2933.888084, 2933.888084, 0.000000, X, Y) && !ellipse(25033.982600, 14750.558600, 1370.720039, 1370.720039, 0.000000, X, Y) && !ellipse(24483.082540, 14001.595400, 809.824023, 809.824023, 0.000000, X, Y) && !ellipse(23766.064056, 13869.856537, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24321.573000, 13540.686000, 1613.768046, 1613.768046, 0.000000, X, Y) && !ellipse(24293.445400, 12827.218000, 1947.352056, 1947.352056, 0.000000, X, Y) && !ellipse(24714.108600, 12357.458000, 1905.544055, 1905.544055, 0.000000, X, Y) && !ellipse(24225.973541, 12213.516510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24131.624420, 11607.559174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24582.822754, 11436.171722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23623.088074, 11612.006348, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24428.200000, 11125.840000, 2069.336060, 2069.336060, 0.000000, X, Y) && !ellipse(23589.926758, 11096.264252, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24652.926147, 10301.388969, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24825.704834, 9503.133835, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24282.564400, 8529.941200, 1763.512051, 1763.512051, 0.000000, X, Y) && !ellipse(23962.363950, 7792.927400, 2125.136061, 1174.904034, 359.947000, X, Y)
[Fri Dec 30 17:15:48 2011] Writing fullrun_mos1_xmm0611180601_pi300-10000_pass1_cl_src8.gif
[Fri Dec 30 17:47:26 2011] Mean detx,y = (2347.51, -7983.95) 
[Fri Dec 30 17:47:30 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 30 17:56:05 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 30 17:56:06 2011] Setting source spectrum file to fullrun_mos1_xmm0611180601_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Fri Dec 30 17:56:06 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0611180601_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Sat Dec 31 09:27:16 2011] Updating aperture counts using extracted products
[Sat Dec 31 09:27:16 2011] Error reading totcts from fullrun_mos1_xmm0611180601_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sat Dec 31 09:27:20 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 31 09:27:20 2011] Using photon index=1.80, rate=0.166, arf fullrun_mos1_xmm0611180601_pi300-10000_pass1_cl_src8.arf
[Sat Dec 31 09:27:20 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 31 09:27:20 2011] Updating source flux to 2.7e-12
[Sat Dec 31 09:27:41 2011] Flag b found in src. 8 procflags, skipping spectral fitting
[Sat Dec 31 09:27:41 2011] Flag c found in src. 8 procflags, skipping spectral fitting