[Mon Dec 26 10:34:30 2011] Detection parameters:
  Position = (279.7, 183.0) = 5 34 33.48 21 53 53.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 409.8 +/- 39.2
  Background counts = 462.4
  Rate = 0.04 +/- 0.004

[Mon Dec 26 10:34:33 2011] Off-axis axis estimate = 8.48'
[Mon Dec 26 10:45:53 2011] Using EEF radius (= 10.67 ")to estimate initial spatial extent for simple fitting
[Mon Dec 26 10:45:53 2011] Initial guess for spatial extent in simple fitting = 10.67"
[Mon Dec 26 10:45:53 2011] source mask rpix=2.5, npix_max = 34, mask sum = 36, frac = 1.033
[Mon Dec 26 10:45:53 2011] Giving source the simple spatial ID 64 for pass 0, mean size = 10.67"
[Tue Dec 27 03:02:49 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_src64.ximg exists
[Tue Dec 27 03:02:49 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_src64_1.ximg exists
[Tue Dec 27 03:02:49 2011] Fit fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_src64 appears to have run properly
[Tue Dec 27 03:02:53 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_tfrozen_src64.ximg exists
[Tue Dec 27 03:02:53 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_tfrozen_src64_1.ximg exists
[Tue Dec 27 03:02:53 2011] Fit fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_tfrozen_src64 appears to have run properly
[Wed Dec 28 10:33:35 2011] Spatial fit model total counts = 7323.700000, observed total counts = 7316.000000
[Wed Dec 28 10:33:35 2011] Offset between fit and detection position for source 77 = 3.462832 pixels
[Wed Dec 28 10:33:35 2011] Warning, changing simple spatial fit ID from 64 to 60
[Wed Dec 28 10:33:35 2011] 7027.225000 total counts/ 6386.010000 bgd. counts: snr = 8.023962
Spatial fit parameters:
  Offset between fit and detection position for source 77 = 3.462832 pixels
  Position = (282.3, 180.7) = 5 34 32.68 21 53 44.1
  Extent = 21.1 (21.1-42.3)", rotation angle = 0
  Source counts = 641.2 +/- 83.8
  Background counts = 6386.0
  Rate = 0.04 +/- 0.006
[Wed Dec 28 10:33:35 2011] Spatial fit model total counts = 7039.320000, observed total counts = 7044.000000
[Wed Dec 28 10:33:35 2011] Offset between fit and detection position for source 77 = 3.206051 pixels
[Wed Dec 28 10:33:35 2011] Warning, changing simple spatial fit ID from 60 to 64
[Wed Dec 28 10:33:35 2011] 7036.526000 total counts/ 6619.280000 bgd. counts: snr = 5.128458
Spatial fit parameters:
  Offset between fit and detection position for source 77 = 3.206051 pixels
  Position = (279.5, 182.4) = 5 34 33.54 21 53 51.3
  Extent = 21.3 (15.0-42.7)" x 8.4 (5.0-13.6)", rotation angle = 83 (70-90) degrees
  Source counts = 417.2 +/- 83.9
  Background counts = 6619.3
  Rate = 0.03 +/- 0.006
[Wed Dec 28 10:33:35 2011] Source 77 is offset by 2.717706 and 1.171211 pixels which is larger than
2 X fitted extent = 1.275880 x 1.275880, not incorporating fit results
[Wed Dec 28 10:33:35 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 10:33:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 10:33:35 2011] Assessing source extent using major axis lower bound
[Wed Dec 28 10:33:35 2011] Source does appear to be extended
[Wed Dec 28 10:33:35 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.10
[Wed Dec 28 10:33:35 2011] Source is confused with source 73
[Wed Dec 28 10:35:30 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Dec 28 10:35:30 2011] Initial guess for spatial extent in simple fitting = 14.88"
[Wed Dec 28 10:35:30 2011] source mask rpix=3.4, npix_max = 61, mask sum = 56, frac = 0.911
[Wed Dec 28 10:35:30 2011] Giving source the simple spatial ID 58 for pass 1, mean size = 14.88"
[Thu Dec 29 05:24:31 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_src58.ximg exists
[Thu Dec 29 05:24:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_src58.csv
[Thu Dec 29 05:24:31 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_src58_1.ximg exists
[Thu Dec 29 05:24:31 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_src58.csv
[Thu Dec 29 05:24:31 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_src58_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 29 05:24:33 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src58.ximg exists
[Thu Dec 29 05:24:33 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src58_1.ximg exists
[Thu Dec 29 05:24:33 2011] Fit fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src58 appears to have run properly
[Fri Dec 30 17:14:36 2011] Warning, spatial fit 58 centroid is now closest to src. 85
[Fri Dec 30 17:14:36 2011] Source 77 is offset by 0.127984 and -3.656076 pixels which is larger than
2 X fitted extent = 1.671853 x 1.671853, not incorporating fit results
[Fri Dec 30 17:14:36 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 17:14:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 17:14:36 2011] Assessing source extent using major axis lower bound
[Fri Dec 30 17:14:36 2011] Source does appear to be extended
[Fri Dec 30 17:14:36 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.10
[Fri Dec 30 17:15:52 2011] XMMSAS src. selection expression = ellipse(24268.926400, 15818.409400, 1280.004037, 505.278615, 83.221000, X, Y)
[Fri Dec 30 17:15:52 2011] Writing source region out to fullrun_mos1_xmm0611180601_pi300-10000_pass1_cl_src77_src.reg
[Fri Dec 30 17:15:52 2011] Extracting stamp from image fullrun_mos1_xmm0611180601_pi300-10000_cl_sm2.00.img.gz, (206, 109) - (353, 256)
[Fri Dec 30 17:15:52 2011] XMMSAS bgd. selection expression = annulus(24268.926400, 15818.409400, 2133.340061, 4266.680123, X, Y) && !ellipse(26147.852000, 17425.869000, 1605.648046, 1605.648046, 0.000000, X, Y) && !ellipse(23193.674255, 17634.774368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24152.600000, 17618.273580, 1592.664046, 1592.664046, 0.000000, X, Y) && !ellipse(22917.665375, 17662.830063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24149.524628, 10827.743217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18866.598000, 17860.548000, 1230.952035, 1230.952035, 0.000000, X, Y) && !ellipse(20452.728210, 17775.522781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19993.210400, 17636.423400, 2639.264076, 2639.264076, 0.000000, X, Y) && !ellipse(27886.130554, 17398.584290, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26684.376678, 17293.515488, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21710.958542, 17666.694458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23329.996735, 16916.612839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21143.740738, 16849.813629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20767.890808, 17178.761139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20969.793839, 17743.537643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24737.727783, 16050.195801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19195.388000, 16374.470000, 1849.624053, 1849.624053, 0.000000, X, Y) && !ellipse(18963.337000, 16053.336800, 1466.944042, 1466.944042, 0.000000, X, Y) && !ellipse(18563.910000, 15729.078800, 1877.880054, 1877.880054, 0.000000, X, Y) && !ellipse(23770.829834, 15627.345215, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24962.754791, 15624.605225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18236.466000, 15208.072000, 2933.888084, 2933.888084, 0.000000, X, Y) && !ellipse(25033.982600, 14750.558600, 1370.720039, 1370.720039, 0.000000, X, Y) && !ellipse(24483.082540, 14001.595400, 809.824023, 809.824023, 0.000000, X, Y) && !ellipse(23766.064056, 13869.856537, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24321.573000, 13540.686000, 1613.768046, 1613.768046, 0.000000, X, Y) && !ellipse(24293.445400, 12827.218000, 1947.352056, 1947.352056, 0.000000, X, Y) && !ellipse(24714.108600, 12357.458000, 1905.544055, 1905.544055, 0.000000, X, Y) && !ellipse(24225.973541, 12213.516510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24131.624420, 11607.559174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24582.822754, 11436.171722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23623.088074, 11612.006348, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24428.200000, 11125.840000, 2069.336060, 2069.336060, 0.000000, X, Y) && !ellipse(23589.926758, 11096.264252, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Dec 30 17:15:52 2011] Writing fullrun_mos1_xmm0611180601_pi300-10000_pass1_cl_src77.gif
[Fri Dec 30 20:05:25 2011] Mean detx,y = (8668.06, -243.41) 
[Fri Dec 30 20:05:27 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 30 20:05:54 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 30 20:05:55 2011] Setting source spectrum file to fullrun_mos1_xmm0611180601_pi300-10000_pass1_cl_src77_src_b10.pi.gz
[Fri Dec 30 20:05:55 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0611180601_pi300-10000_pass1_cl_src77_bgd.pi.gz
[Sat Dec 31 09:27:18 2011] Updating aperture counts using extracted products
[Sat Dec 31 09:27:19 2011] Error reading totcts from fullrun_mos1_xmm0611180601_pi300-10000_pass1_cl_src77_src_b10.pi.gz
[Sat Dec 31 09:27:23 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 31 09:27:23 2011] Using photon index=1.80, rate=0.0279, arf fullrun_mos1_xmm0611180601_pi300-10000_pass1_cl_src77.arf
[Sat Dec 31 09:27:23 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 31 09:27:23 2011] Updating source flux to 5.3e-13
[Sat Dec 31 09:27:41 2011] Flag b found in src. 77 procflags, skipping spectral fitting
[Sat Dec 31 09:27:41 2011] Flag c found in src. 77 procflags, skipping spectral fitting