[Mon Dec 26 10:34:29 2011] Detection parameters:
  Position = (222.4, 188.0) = 5 34 51.38 21 54 12.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 133.9 +/- 27.4
  Background counts = 291.8
  Rate = 0.01 +/- 0.003

[Mon Dec 26 10:34:33 2011] Off-axis axis estimate = 9.72'
[Mon Dec 26 10:45:53 2011] Using EEF radius (= 11.29 ")to estimate initial spatial extent for simple fitting
[Mon Dec 26 10:45:53 2011] Initial guess for spatial extent in simple fitting = 11.29"
[Mon Dec 26 10:45:53 2011] source mask rpix=2.6, npix_max = 38, mask sum = 42, frac = 1.096
[Mon Dec 26 10:45:53 2011] Giving source the simple spatial ID 61 for pass 0, mean size = 11.29"
[Tue Dec 27 03:02:49 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_src61.ximg exists
[Tue Dec 27 03:02:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_src61.csv
[Tue Dec 27 03:02:49 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_src61_1.ximg exists
[Tue Dec 27 03:02:49 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_src61.csv
[Tue Dec 27 03:02:49 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 27 03:02:52 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Tue Dec 27 03:02:52 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Tue Dec 27 03:02:52 2011] Fit fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_tfrozen_src61 appears to have run properly
[Wed Dec 28 10:33:35 2011] Source 74 is offset by -0.817171 and -3.799880 pixels which is larger than
2 X fitted extent = 1.278230 x 1.278230, not incorporating fit results
[Wed Dec 28 10:33:35 2011] Source 74 is offset by -0.311148 and 1.354052 pixels which is larger than
2 X fitted extent = 1.272386 x 1.272386, not incorporating fit results
[Wed Dec 28 10:33:35 2011] Source 74 is offset by -4.346596 and -3.954040 pixels which is larger than
2 X fitted extent = 1.360239 x 1.360239, not incorporating fit results
[Wed Dec 28 10:33:35 2011] Spatial fit model total counts = 3285.690000, observed total counts = 3283.000000
[Wed Dec 28 10:33:35 2011] Offset between fit and detection position for source 74 = 1.451907 pixels
[Wed Dec 28 10:33:35 2011] Warning, changing simple spatial fit ID from 61 to 63
[Wed Dec 28 10:33:35 2011] 3162.470000 total counts/ 2410.070000 bgd. counts: snr = 15.326181
Spatial fit parameters:
  Offset between fit and detection position for source 74 = 1.451907 pixels
  Position = (221.2, 188.8) = 5 34 51.76 21 54 19.0
  Extent = 23.1 (22.2-46.2)", rotation angle = 0
  Source counts = 752.4 +/- 56.2
  Background counts = 2410.1
  Rate = 0.05 +/- 0.004
[Wed Dec 28 10:33:35 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 10:33:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 10:33:35 2011] Assessing source extent using major axis lower bound
[Wed Dec 28 10:33:35 2011] Source does appear to be extended
[Wed Dec 28 10:33:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 10:33:35 2011] Source is confused with source 12
[Wed Dec 28 10:35:30 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Dec 28 10:35:30 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Dec 28 10:35:30 2011] Initial guess for spatial extent in simple fitting = 23.12"
[Wed Dec 28 10:35:30 2011] source mask rpix=5.3, npix_max = 135, mask sum = 144, frac = 1.065
[Wed Dec 28 10:35:30 2011] Giving source the simple spatial ID 55 for pass 1, mean size = 23.12"
[Thu Dec 29 05:24:31 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_src55.ximg exists
[Thu Dec 29 05:24:31 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_src55_1.ximg exists
[Thu Dec 29 05:24:31 2011] Fit fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_src55 appears to have run properly
[Thu Dec 29 05:24:33 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src55.ximg exists
[Thu Dec 29 05:24:33 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src55_1.ximg exists
[Thu Dec 29 05:24:33 2011] Fit fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src55 appears to have run properly
[Fri Dec 30 17:14:36 2011] Warning, spatial fit 55 centroid is now closest to src. 80
[Fri Dec 30 17:14:36 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 17:14:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 17:14:36 2011] Assessing source extent using major axis lower bound
[Fri Dec 30 17:14:36 2011] Source does appear to be extended
[Fri Dec 30 17:14:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 17:15:52 2011] XMMSAS src. selection expression = ellipse(19195.388000, 16374.470000, 1387.218040, 1387.218040, 0.000000, X, Y)
[Fri Dec 30 17:15:52 2011] Writing source region out to fullrun_mos1_xmm0611180601_pi300-10000_pass1_cl_src74_src.reg
[Fri Dec 30 17:15:52 2011] Extracting stamp from image fullrun_mos1_xmm0611180601_pi300-10000_cl_sm2.00.img.gz, (141, 109) - (301, 268)
[Fri Dec 30 17:15:52 2011] XMMSAS bgd. selection expression = annulus(19195.388000, 16374.470000, 2312.030067, 4624.060133, X, Y) && !ellipse(23193.674255, 17634.774368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24152.600000, 17618.273580, 1592.664046, 1592.664046, 0.000000, X, Y) && !ellipse(17742.016312, 19472.264389, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22917.665375, 17662.830063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18153.734360, 17067.625595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17580.959800, 21819.060800, 1489.896043, 755.517622, 90.000000, X, Y) && !ellipse(17331.239471, 21067.522812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17428.848200, 19576.552000, 1727.440050, 1727.440050, 0.000000, X, Y) && !ellipse(18866.598000, 17860.548000, 1230.952035, 1230.952035, 0.000000, X, Y) && !ellipse(20452.728210, 17775.522781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19993.210400, 17636.423400, 2639.264076, 2639.264076, 0.000000, X, Y) && !ellipse(21710.958542, 17666.694458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18893.438797, 17164.819580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23329.996735, 16916.612839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21143.740738, 16849.813629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18485.368759, 17453.757126, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20767.890808, 17178.761139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20969.793839, 17743.537643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18963.337000, 16053.336800, 1466.944042, 1466.944042, 0.000000, X, Y) && !ellipse(18563.910000, 15729.078800, 1877.880054, 1877.880054, 0.000000, X, Y) && !ellipse(24268.926400, 15818.409400, 1706.672049, 673.704819, 83.221000, X, Y) && !ellipse(23770.829834, 15627.345215, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18236.466000, 15208.072000, 2933.888084, 2933.888084, 0.000000, X, Y) && !ellipse(25033.982600, 14750.558600, 1370.720039, 1370.720039, 0.000000, X, Y) && !ellipse(24483.082540, 14001.595400, 809.824023, 809.824023, 0.000000, X, Y) && !ellipse(23766.064056, 13869.856537, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24321.573000, 13540.686000, 1613.768046, 1613.768046, 0.000000, X, Y) && !ellipse(24293.445400, 12827.218000, 1947.352056, 1947.352056, 0.000000, X, Y) && !ellipse(24714.108600, 12357.458000, 1905.544055, 1905.544055, 0.000000, X, Y) && !ellipse(24225.973541, 12213.516510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24131.624420, 11607.559174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24582.822754, 11436.171722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23623.088074, 11612.006348, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24428.200000, 11125.840000, 2069.336060, 2069.336060, 0.000000, X, Y) && !ellipse(23589.926758, 11096.264252, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Dec 30 17:15:52 2011] Writing fullrun_mos1_xmm0611180601_pi300-10000_pass1_cl_src74.gif
[Fri Dec 30 19:53:28 2011] Mean detx,y = (8346.79, 4802.34) 
[Fri Dec 30 19:53:33 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 30 19:53:52 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 30 19:53:53 2011] Setting source spectrum file to fullrun_mos1_xmm0611180601_pi300-10000_pass1_cl_src74_src_b10.pi.gz
[Fri Dec 30 19:53:53 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0611180601_pi300-10000_pass1_cl_src74_bgd.pi.gz
[Sat Dec 31 09:27:18 2011] Updating aperture counts using extracted products
[Sat Dec 31 09:27:18 2011] Error reading totcts from fullrun_mos1_xmm0611180601_pi300-10000_pass1_cl_src74_src_b10.pi.gz
[Sat Dec 31 09:27:23 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 31 09:27:23 2011] Using photon index=1.80, rate=0.0503, arf fullrun_mos1_xmm0611180601_pi300-10000_pass1_cl_src74.arf
[Sat Dec 31 09:27:23 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 31 09:27:23 2011] Updating source flux to 7.9e-13
[Sat Dec 31 09:27:41 2011] Flag b found in src. 74 procflags, skipping spectral fitting
[Sat Dec 31 09:27:41 2011] Flag c found in src. 74 procflags, skipping spectral fitting