[Mon Dec 26 10:34:22 2011] Detection parameters:
  Position = (363.8, 282.1) = 5 34 7.16 22 0 58.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 523.1 +/- 32.8
  Background counts = 393.3
  Rate = 0.06 +/- 0.004

[Mon Dec 26 10:34:33 2011] Off-axis axis estimate = 4.89'
[Mon Dec 26 10:45:53 2011] Using EEF radius (= 8.87 ")to estimate initial spatial extent for simple fitting
[Mon Dec 26 10:45:53 2011] Initial guess for spatial extent in simple fitting = 8.87"
[Mon Dec 26 10:45:53 2011] source mask rpix=2.0, npix_max = 25, mask sum = 20, frac = 0.775
[Mon Dec 26 10:45:53 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 8.87"
[Tue Dec 27 03:02:48 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_src5.ximg exists
[Tue Dec 27 03:02:48 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue Dec 27 03:02:48 2011] Fit fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_src5 appears to have run properly
[Tue Dec 27 03:02:51 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue Dec 27 03:02:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_tfrozen_src5.csv
[Tue Dec 27 03:02:51 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue Dec 27 03:02:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_tfrozen_src5.csv
[Tue Dec 27 03:02:51 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 10:33:34 2011] Warning, spatial fit 5 centroid is now closest to src. 7
[Wed Dec 28 10:33:35 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 10:33:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 10:33:35 2011] Assessing source extent using major
[Wed Dec 28 10:33:35 2011] Source does appear to be extended
[Wed Dec 28 10:33:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 10:33:35 2011] Source is confused with source 7
[Wed Dec 28 10:33:35 2011] Source is confused with source 36
[Wed Dec 28 10:35:30 2011] Using EEF radius (= 8.87 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 10:35:30 2011] Initial guess for spatial extent in simple fitting = 8.87"
[Wed Dec 28 10:35:30 2011] source mask rpix=2.0, npix_max = 25, mask sum = 20, frac = 0.775
[Wed Dec 28 10:35:30 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 8.87"
[Thu Dec 29 05:24:29 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_src5.ximg exists
[Thu Dec 29 05:24:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_src5.csv
[Thu Dec 29 05:24:29 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu Dec 29 05:24:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_src5.csv
[Thu Dec 29 05:24:29 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 29 05:24:32 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu Dec 29 05:24:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src5.csv
[Thu Dec 29 05:24:32 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu Dec 29 05:24:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src5.csv
[Thu Dec 29 05:24:32 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 17:14:35 2011] Warning, spatial fit 5 centroid is now closest to src. 33
[Fri Dec 30 17:14:36 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 17:14:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 17:14:36 2011] Assessing source extent using major
[Fri Dec 30 17:14:36 2011] Source does appear to be extended
[Fri Dec 30 17:14:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 17:15:47 2011] XMMSAS src. selection expression = ellipse(31605.478790, 24492.822571, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Dec 30 17:15:47 2011] Writing source region out to fullrun_mos1_xmm0611180601_pi300-10000_pass1_cl_src6_src.reg
[Fri Dec 30 17:15:47 2011] Extracting stamp from image fullrun_mos1_xmm0611180601_pi300-10000_cl_sm2.00.img.gz, (326, 245) - (401, 320)
[Fri Dec 30 17:15:47 2011] XMMSAS bgd. selection expression = annulus(31605.478790, 24492.822571, 1087.500000, 2175.000000, X, Y) && !ellipse(31884.392000, 23635.558800, 1489.896043, 1489.896043, 0.000000, X, Y) && !ellipse(31646.699600, 21757.730000, 1522.920044, 1522.920044, 0.000000, X, Y) && !ellipse(31754.654000, 26873.018800, 982.880028, 982.880028, 0.000000, X, Y) && !ellipse(31810.014000, 27734.760000, 3037.760087, 3037.760087, 0.000000, X, Y) && !ellipse(32402.359283, 27439.055481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32490.161102, 26660.924805, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31490.850555, 25884.018097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31782.946259, 25354.820312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32347.798431, 23364.161652, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31440.248352, 22494.063416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32361.755920, 22321.637848, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Dec 30 17:15:47 2011] Writing fullrun_mos1_xmm0611180601_pi300-10000_pass1_cl_src6.gif
[Fri Dec 30 17:37:17 2011] Mean detx,y = (-331.60, -7265.07) 
[Fri Dec 30 17:37:20 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 30 17:37:45 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 30 17:37:45 2011] Setting source spectrum file to fullrun_mos1_xmm0611180601_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri Dec 30 17:37:45 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0611180601_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Fri Dec 30 20:58:54 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Dec 30 20:58:54 2011] rmf not generated due to insufficient counts
[Sat Dec 31 09:27:16 2011] Updating aperture counts using extracted products
[Sat Dec 31 09:27:16 2011] Error reading totcts from fullrun_mos1_xmm0611180601_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sat Dec 31 09:27:20 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 31 09:27:20 2011] Using photon index=1.80, rate=0.0575, arf fullrun_mos1_xmm0611180601_pi300-10000_pass1_cl_src6.arf
[Sat Dec 31 09:27:20 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 31 09:27:20 2011] Updating source flux to 1.2e-12
[Sat Dec 31 09:27:41 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting