[Mon Dec 26 10:34:26 2011] Detection parameters:
  Position = (372.4, 269.1) = 5 34 4.49 22 0 6.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 220.8 +/- 30.9
  Background counts = 357.2
  Rate = 0.02 +/- 0.003

[Mon Dec 26 10:34:33 2011] Off-axis axis estimate = 5.77'
[Mon Dec 26 10:45:53 2011] Using EEF radius (= 9.31 ")to estimate initial spatial extent for simple fitting
[Mon Dec 26 10:45:53 2011] Initial guess for spatial extent in simple fitting = 9.31"
[Mon Dec 26 10:45:53 2011] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.076
[Mon Dec 26 10:45:53 2011] Giving source the simple spatial ID 30 for pass 0, mean size = 9.31"
[Tue Dec 27 03:02:48 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_src30.ximg exists
[Tue Dec 27 03:02:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_src30.csv
[Tue Dec 27 03:02:48 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_src30_1.ximg exists
[Tue Dec 27 03:02:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_src30.csv
[Tue Dec 27 03:02:48 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 27 03:02:52 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Tue Dec 27 03:02:52 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Tue Dec 27 03:02:52 2011] Fit fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Wed Dec 28 10:33:34 2011] Source 41 is offset by -1.122007 and -6.237130 pixels which is larger than
2 X fitted extent = 8.417701 x 1.052212, not incorporating fit results
[Wed Dec 28 10:33:35 2011] Warning, spatial fit 30 centroid is now closest to src. 7
[Wed Dec 28 10:33:35 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 10:33:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 10:33:35 2011] Assessing source extent using major
[Wed Dec 28 10:33:35 2011] Source does appear to be extended
[Wed Dec 28 10:33:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 10:33:35 2011] Source is confused with source 7
[Wed Dec 28 10:35:30 2011] Using EEF radius (= 9.31 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 10:35:30 2011] Initial guess for spatial extent in simple fitting = 9.31"
[Wed Dec 28 10:35:30 2011] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.076
[Wed Dec 28 10:35:30 2011] Giving source the simple spatial ID 29 for pass 1, mean size = 9.31"
[Thu Dec 29 05:24:30 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_src29.ximg exists
[Thu Dec 29 05:24:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_src29.csv
[Thu Dec 29 05:24:30 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_src29_1.ximg exists
[Thu Dec 29 05:24:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_src29.csv
[Thu Dec 29 05:24:30 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 29 05:24:32 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Thu Dec 29 05:24:33 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Thu Dec 29 05:24:33 2011] Fit fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Fri Dec 30 17:14:35 2011] Warning, spatial fit 29 centroid is now closest to src. 7
[Fri Dec 30 17:14:36 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 17:14:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 17:14:36 2011] Assessing source extent using major
[Fri Dec 30 17:14:36 2011] Source does appear to be extended
[Fri Dec 30 17:14:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 17:15:49 2011] XMMSAS src. selection expression = ellipse(32347.798431, 23364.161652, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Dec 30 17:15:49 2011] Writing source region out to fullrun_mos1_xmm0611180601_pi300-10000_pass1_cl_src41_src.reg
[Fri Dec 30 17:15:49 2011] Extracting stamp from image fullrun_mos1_xmm0611180601_pi300-10000_cl_sm2.00.img.gz, (335, 232) - (410, 307)
[Fri Dec 30 17:15:49 2011] XMMSAS bgd. selection expression = annulus(32347.798431, 23364.161652, 1087.500000, 2175.000000, X, Y) && !ellipse(31605.478790, 24492.822571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31884.392000, 23635.558800, 1489.896043, 1489.896043, 0.000000, X, Y) && !ellipse(31646.699600, 21757.730000, 1522.920044, 1522.920044, 0.000000, X, Y) && !ellipse(31810.014000, 27734.760000, 3037.760087, 3037.760087, 0.000000, X, Y) && !ellipse(31490.850555, 25884.018097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31782.946259, 25354.820312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31440.248352, 22494.063416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32361.755920, 22321.637848, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31830.819092, 21443.518768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31614.054000, 20667.212800, 1581.264046, 1581.264046, 0.000000, X, Y) && !ellipse(32096.420258, 20390.380157, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Dec 30 17:15:49 2011] Writing fullrun_mos1_xmm0611180601_pi300-10000_pass1_cl_src41.gif
[Fri Dec 30 18:44:53 2011] Mean detx,y = (819.38, -7878.15) 
[Fri Dec 30 18:44:57 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 30 18:45:21 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 30 18:45:21 2011] Setting source spectrum file to fullrun_mos1_xmm0611180601_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Fri Dec 30 18:45:21 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0611180601_pi300-10000_pass1_cl_src41_bgd.pi.gz
[Fri Dec 30 21:56:48 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Dec 30 21:56:48 2011] rmf not generated due to insufficient counts
[Sat Dec 31 09:27:17 2011] Updating aperture counts using extracted products
[Sat Dec 31 09:27:17 2011] Error reading totcts from fullrun_mos1_xmm0611180601_pi300-10000_pass1_cl_src41_src_b10.pi.gz
[Sat Dec 31 09:27:22 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 31 09:27:22 2011] Using photon index=1.80, rate=0.0239, arf fullrun_mos1_xmm0611180601_pi300-10000_pass1_cl_src41.arf
[Sat Dec 31 09:27:22 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 31 09:27:22 2011] Updating source flux to 4.3e-13
[Sat Dec 31 09:27:41 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting