[Mon Dec 26 10:34:25 2011] Detection parameters:
  Position = (206.8, 303.0) = 5 34 56.30 22 2 37.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 331.6 +/- 27.8
  Background counts = 521.4
  Rate = 0.04 +/- 0.003

[Mon Dec 26 10:34:33 2011] Off-axis axis estimate = 6.65'
[Mon Dec 26 10:45:53 2011] Using EEF radius (= 9.76 ")to estimate initial spatial extent for simple fitting
[Mon Dec 26 10:45:53 2011] Initial guess for spatial extent in simple fitting = 9.76"
[Mon Dec 26 10:45:53 2011] source mask rpix=2.2, npix_max = 30, mask sum = 18, frac = 0.598
[Mon Dec 26 10:45:53 2011] Giving source the simple spatial ID 22 for pass 0, mean size = 9.76"
[Tue Dec 27 03:02:48 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_src22.ximg exists
[Tue Dec 27 03:02:48 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_src22_1.ximg exists
[Tue Dec 27 03:02:48 2011] Fit fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_src22 appears to have run properly
[Tue Dec 27 03:02:51 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Tue Dec 27 03:02:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_tfrozen_src22.csv
[Tue Dec 27 03:02:51 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Tue Dec 27 03:02:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_tfrozen_src22.csv
[Tue Dec 27 03:02:51 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 10:33:34 2011] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 31 at 13.289447 pixels away
[Wed Dec 28 10:33:35 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 10:33:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 10:33:35 2011] Assessing source extent using major
[Wed Dec 28 10:33:35 2011] Source does appear to be extended
[Wed Dec 28 10:33:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 10:33:35 2011] Source is confused with source 29
[Wed Dec 28 10:35:30 2011] Using EEF radius (= 9.76 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 10:35:30 2011] Initial guess for spatial extent in simple fitting = 9.76"
[Wed Dec 28 10:35:30 2011] source mask rpix=2.2, npix_max = 30, mask sum = 18, frac = 0.598
[Wed Dec 28 10:35:30 2011] Giving source the simple spatial ID 22 for pass 1, mean size = 9.76"
[Thu Dec 29 05:24:30 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_src22.ximg exists
[Thu Dec 29 05:24:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_src22.csv
[Thu Dec 29 05:24:30 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_src22_1.ximg exists
[Thu Dec 29 05:24:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_src22.csv
[Thu Dec 29 05:24:30 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 29 05:24:32 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Thu Dec 29 05:24:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src22.csv
[Thu Dec 29 05:24:32 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Thu Dec 29 05:24:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src22.csv
[Thu Dec 29 05:24:32 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 30 17:14:35 2011] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 31 at 13.590983 pixels away
[Fri Dec 30 17:14:36 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 17:14:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 17:14:36 2011] Assessing source extent using major
[Fri Dec 30 17:14:36 2011] Source does appear to be extended
[Fri Dec 30 17:14:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 17:15:49 2011] XMMSAS src. selection expression = ellipse(17940.847473, 26309.316620, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Dec 30 17:15:49 2011] Writing source region out to fullrun_mos1_xmm0611180601_pi300-10000_pass1_cl_src31_src.reg
[Fri Dec 30 17:15:49 2011] Extracting stamp from image fullrun_mos1_xmm0611180601_pi300-10000_cl_sm2.00.img.gz, (169, 265) - (244, 340)
[Fri Dec 30 17:15:49 2011] XMMSAS bgd. selection expression = annulus(17940.847473, 26309.316620, 1087.500000, 2175.000000, X, Y) && !ellipse(17802.877000, 28518.639000, 1326.456038, 1326.456038, 0.000000, X, Y) && !ellipse(17744.951400, 27215.264600, 1588.216046, 1588.216046, 0.000000, X, Y) && !ellipse(17557.147949, 25361.338409, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17696.701599, 24394.801544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17916.997345, 23964.354919, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17877.980362, 23512.293701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17139.629990, 23514.946075, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Dec 30 17:15:49 2011] Writing fullrun_mos1_xmm0611180601_pi300-10000_pass1_cl_src31.gif
[Fri Dec 30 18:39:22 2011] Mean detx,y = (-1370.51, 6842.89) 
[Fri Dec 30 18:39:25 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 30 18:39:50 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 30 18:39:50 2011] Setting source spectrum file to fullrun_mos1_xmm0611180601_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Fri Dec 30 18:39:50 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0611180601_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Fri Dec 30 21:54:39 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Dec 30 21:54:39 2011] rmf not generated due to insufficient counts
[Sat Dec 31 09:27:17 2011] Updating aperture counts using extracted products
[Sat Dec 31 09:27:17 2011] Error reading totcts from fullrun_mos1_xmm0611180601_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Sat Dec 31 09:27:21 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 31 09:27:21 2011] Using photon index=1.80, rate=0.0398, arf fullrun_mos1_xmm0611180601_pi300-10000_pass1_cl_src31.arf
[Sat Dec 31 09:27:21 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 31 09:27:21 2011] Updating source flux to 7.6e-13
[Sat Dec 31 09:27:41 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting