[Mon Dec 26 10:34:22 2011] Detection parameters:
  Position = (264.0, 203.6) = 5 34 38.39 21 55 25.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 456.5 +/- 35.6
  Background counts = 512.3
  Rate = 0.05 +/- 0.004

[Mon Dec 26 10:34:33 2011] Off-axis axis estimate = 7.32'
[Mon Dec 26 10:45:53 2011] Using EEF radius (= 10.09 ")to estimate initial spatial extent for simple fitting
[Mon Dec 26 10:45:53 2011] Initial guess for spatial extent in simple fitting = 10.09"
[Mon Dec 26 10:45:53 2011] source mask rpix=2.3, npix_max = 31, mask sum = 20, frac = 0.629
[Mon Dec 26 10:45:53 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 10.09"
[Tue Dec 27 03:02:48 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_src7.ximg exists
[Tue Dec 27 03:02:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_src7.csv
[Tue Dec 27 03:02:48 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_src7_1.ximg exists
[Tue Dec 27 03:02:48 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_src7.csv
[Tue Dec 27 03:02:48 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 27 03:02:51 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Tue Dec 27 03:02:51 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Tue Dec 27 03:02:51 2011] Fit fullrun_mos1_xmm0611180601_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Wed Dec 28 10:33:34 2011] Warning, spatial fit 7 centroid is now closest to src. 66
[Wed Dec 28 10:33:35 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 10:33:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 10:33:35 2011] Assessing source extent using major
[Wed Dec 28 10:33:35 2011] Source does appear to be extended
[Wed Dec 28 10:33:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 10:33:35 2011] Source is confused with source 2
[Wed Dec 28 10:35:30 2011] Using EEF radius (= 10.09 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 10:35:30 2011] Initial guess for spatial extent in simple fitting = 10.09"
[Wed Dec 28 10:35:30 2011] source mask rpix=2.3, npix_max = 31, mask sum = 20, frac = 0.629
[Wed Dec 28 10:35:30 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 10.09"
[Thu Dec 29 05:24:29 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_src9.ximg exists
[Thu Dec 29 05:24:29 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_src9_1.ximg exists
[Thu Dec 29 05:24:29 2011] Fit fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_src9 appears to have run properly
[Thu Dec 29 05:24:32 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Thu Dec 29 05:24:32 2011] fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Thu Dec 29 05:24:32 2011] Fit fullrun_mos1_xmm0611180601_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Fri Dec 30 17:14:35 2011] Warning, spatial fit 9 centroid is now closest to src. 66
[Fri Dec 30 17:14:36 2011] Vigneting correction estimate = 1.000000
[Fri Dec 30 17:14:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 30 17:14:36 2011] Assessing source extent using major
[Fri Dec 30 17:14:36 2011] Source does appear to be extended
[Fri Dec 30 17:14:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 30 17:15:48 2011] XMMSAS src. selection expression = ellipse(22917.665375, 17662.830063, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Dec 30 17:15:48 2011] Writing source region out to fullrun_mos1_xmm0611180601_pi300-10000_pass1_cl_src11_src.reg
[Fri Dec 30 17:15:48 2011] Extracting stamp from image fullrun_mos1_xmm0611180601_pi300-10000_cl_sm2.00.img.gz, (226, 166) - (301, 241)
[Fri Dec 30 17:15:48 2011] XMMSAS bgd. selection expression = annulus(22917.665375, 17662.830063, 1087.500000, 2175.000000, X, Y) && !ellipse(26147.852000, 17425.869000, 1605.648046, 1605.648046, 0.000000, X, Y) && !ellipse(23193.674255, 17634.774368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24152.600000, 17618.273580, 1592.664046, 1592.664046, 0.000000, X, Y) && !ellipse(20452.728210, 17775.522781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19993.210400, 17636.423400, 2639.264076, 2639.264076, 0.000000, X, Y) && !ellipse(21710.958542, 17666.694458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23329.996735, 16916.612839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21143.740738, 16849.813629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20767.890808, 17178.761139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20969.793839, 17743.537643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24737.727783, 16050.195801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19195.388000, 16374.470000, 1849.624053, 1849.624053, 0.000000, X, Y) && !ellipse(24268.926400, 15818.409400, 1706.672049, 673.704819, 83.221000, X, Y) && !ellipse(23770.829834, 15627.345215, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24962.754791, 15624.605225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18236.466000, 15208.072000, 2933.888084, 2933.888084, 0.000000, X, Y) && !ellipse(25033.982600, 14750.558600, 1370.720039, 1370.720039, 0.000000, X, Y)
[Fri Dec 30 17:15:48 2011] Writing fullrun_mos1_xmm0611180601_pi300-10000_pass1_cl_src11.gif
[Fri Dec 30 17:57:31 2011] Mean detx,y = (7090.23, 1179.23) 
[Fri Dec 30 17:57:33 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 30 17:57:56 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 30 17:57:56 2011] Setting source spectrum file to fullrun_mos1_xmm0611180601_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Fri Dec 30 17:57:56 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0611180601_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Fri Dec 30 21:16:30 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Dec 30 21:16:30 2011] rmf not generated due to insufficient counts
[Sat Dec 31 09:27:16 2011] Updating aperture counts using extracted products
[Sat Dec 31 09:27:16 2011] Error reading totcts from fullrun_mos1_xmm0611180601_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sat Dec 31 09:27:20 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 31 09:27:20 2011] Using photon index=1.80, rate=0.0518, arf fullrun_mos1_xmm0611180601_pi300-10000_pass1_cl_src11.arf
[Sat Dec 31 09:27:20 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 31 09:27:20 2011] Updating source flux to 8.6e-13
[Sat Dec 31 09:27:41 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting