[Sun Dec 25 22:34:11 2011] Detection parameters:
  Position = (205.8, 296.1) = 5 34 56.61 22 2 5.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 173.4 +/- 22.5
  Background counts = 198.0
  Rate = 0.04 +/- 0.005

[Sun Dec 25 22:34:13 2011] Off-axis axis estimate = 6.72'
[Mon Dec 26 09:02:06 2011] Using EEF radius (= 9.79 ")to estimate initial spatial extent for simple fitting
[Mon Dec 26 09:02:06 2011] Initial guess for spatial extent in simple fitting = 9.79"
[Mon Dec 26 09:02:06 2011] source mask rpix=2.3, npix_max = 30, mask sum = 27, frac = 0.892
[Mon Dec 26 09:02:06 2011] Giving source the simple spatial ID 41 for pass 0, mean size = 9.79"
[Tue Dec 27 04:04:29 2011] fullrun_mos2_xmm0611180501_pi300-10000_cl_pass0_src41.ximg exists
[Tue Dec 27 04:04:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180501_pi300-10000_cl_pass0_src41.csv
[Tue Dec 27 04:04:29 2011] fullrun_mos2_xmm0611180501_pi300-10000_cl_pass0_src41_1.ximg exists
[Tue Dec 27 04:04:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180501_pi300-10000_cl_pass0_src41.csv
[Tue Dec 27 04:04:29 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180501_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180501_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 27 04:04:32 2011] fullrun_mos2_xmm0611180501_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Tue Dec 27 04:04:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180501_pi300-10000_cl_pass0_tfrozen_src41.csv
[Tue Dec 27 04:04:32 2011] fullrun_mos2_xmm0611180501_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Tue Dec 27 04:04:32 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180501_pi300-10000_cl_pass0_tfrozen_src41.csv
[Tue Dec 27 04:04:32 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180501_pi300-10000_cl_pass0_tfrozen_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180501_pi300-10000_cl_pass0_tfrozen_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 27 04:06:01 2011] Spatial fit model total counts = 1746.340000, observed total counts = 2089.000000
[Tue Dec 27 04:06:01 2011] Poor agreement between spatial fit and data for source 59
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Dec 27 04:06:01 2011] Vigneting correction estimate = 1.000000
[Tue Dec 27 04:06:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 27 04:06:01 2011] Assessing source extent using major
[Tue Dec 27 04:06:01 2011] Source does appear to be extended
[Tue Dec 27 04:06:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 27 04:06:01 2011] Source is confused with source 56
[Tue Dec 27 20:19:21 2011] Using EEF radius (= 9.79 ")to estimate initial spatial extent for simple fitting
[Tue Dec 27 20:19:21 2011] Initial guess for spatial extent in simple fitting = 9.79"
[Tue Dec 27 20:19:21 2011] source mask rpix=2.3, npix_max = 30, mask sum = 27, frac = 0.892
[Tue Dec 27 20:19:21 2011] Giving source the simple spatial ID 39 for pass 1, mean size = 9.79"
[Wed Dec 28 21:07:29 2011] fullrun_mos2_xmm0611180501_pi300-10000_cl_pass1_src39.ximg exists
[Wed Dec 28 21:07:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180501_pi300-10000_cl_pass1_src39.csv
[Wed Dec 28 21:07:29 2011] fullrun_mos2_xmm0611180501_pi300-10000_cl_pass1_src39_1.ximg exists
[Wed Dec 28 21:07:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180501_pi300-10000_cl_pass1_src39.csv
[Wed Dec 28 21:07:29 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180501_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180501_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 21:07:31 2011] fullrun_mos2_xmm0611180501_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Wed Dec 28 21:07:31 2011] fullrun_mos2_xmm0611180501_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Wed Dec 28 21:07:31 2011] Fit fullrun_mos2_xmm0611180501_pi300-10000_cl_pass1_tfrozen_src39 appears to have run properly
[Wed Dec 28 21:08:37 2011] Warning, spatial fit 39 centroid is now closest to src. 57
[Wed Dec 28 21:08:37 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 21:08:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 21:08:37 2011] Assessing source extent using major
[Wed Dec 28 21:08:37 2011] Source does appear to be extended
[Wed Dec 28 21:08:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 04:25:34 2011] XMMSAS src. selection expression = ellipse(17854.547073, 25714.478546, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Dec 29 04:25:34 2011] Writing source region out to fullrun_mos2_xmm0611180501_pi300-10000_pass1_cl_src59_src.reg
[Thu Dec 29 04:25:34 2011] Extracting stamp from image fullrun_mos2_xmm0611180501_pi300-10000_cl_sm2.00.img.gz, (168, 259) - (243, 334)
[Thu Dec 29 04:25:34 2011] XMMSAS bgd. selection expression = annulus(17854.547073, 25714.478546, 1087.500000, 2175.000000, X, Y) && !ellipse(17916.993362, 25007.391144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17920.198200, 27101.373540, 1571.232045, 663.682419, 102.471100, X, Y) && !ellipse(17627.828400, 23565.098600, 1011.687606, 1011.687606, 0.000000, X, Y) && !ellipse(18089.940643, 27798.918152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17844.471600, 26652.360800, 1406.368040, 1406.368040, 0.000000, X, Y) && !ellipse(17856.747000, 28203.690000, 1596.224046, 1596.224046, 0.000000, X, Y) && !ellipse(17254.875519, 25180.137970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17166.666153, 26331.677277, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Dec 29 04:25:34 2011] Writing fullrun_mos2_xmm0611180501_pi300-10000_pass1_cl_src59.gif
[Thu Dec 29 06:00:55 2011] Mean detx,y = (-7015.29, -961.52) 
[Thu Dec 29 06:01:01 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec 29 06:01:21 2011] Binned source spectrum to 10 counts/bin
[Thu Dec 29 06:01:22 2011] Setting source spectrum file to fullrun_mos2_xmm0611180501_pi300-10000_pass1_cl_src59_src_b10.pi.gz
[Thu Dec 29 06:01:22 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0611180501_pi300-10000_pass1_cl_src59_bgd.pi.gz
[Thu Dec 29 10:49:35 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Dec 29 10:49:35 2011] rmf not generated due to insufficient counts
[Thu Dec 29 13:49:54 2011] Updating aperture counts using extracted products
[Thu Dec 29 13:49:54 2011] Error reading totcts from fullrun_mos2_xmm0611180501_pi300-10000_pass1_cl_src59_src_b10.pi.gz
[Thu Dec 29 13:50:01 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec 29 13:50:01 2011] Using photon index=1.80, rate=0.0401, arf fullrun_mos2_xmm0611180501_pi300-10000_pass1_cl_src59.arf
[Thu Dec 29 13:50:01 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec 29 13:50:02 2011] Updating source flux to 7.8e-13
[Thu Dec 29 14:00:19 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting