[Sun Dec 25 22:34:11 2011] Detection parameters:
  Position = (203.9, 304.0) = 5 34 57.21 22 2 42.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 132.8 +/- 23.5
  Background counts = 201.1
  Rate = 0.03 +/- 0.005

[Sun Dec 25 22:34:13 2011] Off-axis axis estimate = 6.87'
[Mon Dec 26 09:02:06 2011] Using EEF radius (= 9.86 ")to estimate initial spatial extent for simple fitting
[Mon Dec 26 09:02:06 2011] Initial guess for spatial extent in simple fitting = 9.86"
[Mon Dec 26 09:02:06 2011] source mask rpix=2.3, npix_max = 30, mask sum = 36, frac = 1.175
[Mon Dec 26 09:02:06 2011] Giving source the simple spatial ID 62 for pass 0, mean size = 9.86"
[Tue Dec 27 04:04:29 2011] fullrun_mos2_xmm0611180501_pi300-10000_cl_pass0_src62.ximg exists
[Tue Dec 27 04:04:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180501_pi300-10000_cl_pass0_src62.csv
[Tue Dec 27 04:04:29 2011] fullrun_mos2_xmm0611180501_pi300-10000_cl_pass0_src62_1.ximg exists
[Tue Dec 27 04:04:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180501_pi300-10000_cl_pass0_src62.csv
[Tue Dec 27 04:04:30 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180501_pi300-10000_cl_pass0_src62_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180501_pi300-10000_cl_pass0_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 27 04:04:33 2011] fullrun_mos2_xmm0611180501_pi300-10000_cl_pass0_tfrozen_src62.ximg exists
[Tue Dec 27 04:04:33 2011] fullrun_mos2_xmm0611180501_pi300-10000_cl_pass0_tfrozen_src62_1.ximg exists
[Tue Dec 27 04:04:33 2011] Fit fullrun_mos2_xmm0611180501_pi300-10000_cl_pass0_tfrozen_src62 appears to have run properly
[Tue Dec 27 04:06:01 2011] Spatial fit model total counts = 2336.430000, observed total counts = 2452.000000
[Tue Dec 27 04:06:01 2011] Offset between fit and detection position for source 56 = 3.377685 pixels
[Tue Dec 27 04:06:01 2011] 1498.164000 total counts/ 59.864000 bgd. counts: snr = 185.894532
Spatial fit parameters:
  Offset between fit and detection position for source 56 = 3.377685 pixels
  Position = (205.7, 306.9) = 5 34 56.65 22 2 52.8
  Extent = 17.6 (16.5-19.7)", rotation angle = 0
  Source counts = 1438.3 +/- 38.7
  Background counts = 59.9
  Rate = 0.2 +/- 0.006
[Tue Dec 27 04:06:01 2011] Vigneting correction estimate = 1.000000
[Tue Dec 27 04:06:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 27 04:06:01 2011] Assessing source extent using major axis lower bound
[Tue Dec 27 04:06:01 2011] Source does appear to be extended
[Tue Dec 27 04:06:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 27 04:06:01 2011] Source is confused with source 59
[Tue Dec 27 20:19:21 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Dec 27 20:19:21 2011] Initial guess for spatial extent in simple fitting = 17.58"
[Tue Dec 27 20:19:21 2011] source mask rpix=4.0, npix_max = 82, mask sum = 63, frac = 0.764
[Tue Dec 27 20:19:21 2011] Giving source the simple spatial ID 57 for pass 1, mean size = 17.58"
[Wed Dec 28 21:07:29 2011] fullrun_mos2_xmm0611180501_pi300-10000_cl_pass1_src57.ximg exists
[Wed Dec 28 21:07:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180501_pi300-10000_cl_pass1_src57.csv
[Wed Dec 28 21:07:29 2011] fullrun_mos2_xmm0611180501_pi300-10000_cl_pass1_src57_1.ximg exists
[Wed Dec 28 21:07:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180501_pi300-10000_cl_pass1_src57.csv
[Wed Dec 28 21:07:29 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180501_pi300-10000_cl_pass1_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180501_pi300-10000_cl_pass1_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 21:07:31 2011] fullrun_mos2_xmm0611180501_pi300-10000_cl_pass1_tfrozen_src57.ximg exists
[Wed Dec 28 21:07:31 2011] fullrun_mos2_xmm0611180501_pi300-10000_cl_pass1_tfrozen_src57_1.ximg exists
[Wed Dec 28 21:07:31 2011] Fit fullrun_mos2_xmm0611180501_pi300-10000_cl_pass1_tfrozen_src57 appears to have run properly
[Wed Dec 28 21:08:37 2011] Warning, spatial fit 57 centroid is now closest to src. 60
[Wed Dec 28 21:08:37 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 21:08:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 21:08:37 2011] Assessing source extent using major axis lower bound
[Wed Dec 28 21:08:37 2011] Source does appear to be extended
[Wed Dec 28 21:08:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 04:25:36 2011] Counts = 1438.300000, rescaling region sizes by 2.000000
[Thu Dec 29 04:25:36 2011] XMMSAS src. selection expression = ellipse(17844.471600, 26652.360800, 2109.552061, 2109.552061, 0.000000, X, Y)
[Thu Dec 29 04:25:36 2011] Writing source region out to fullrun_mos2_xmm0611180501_pi300-10000_pass1_cl_src56_src.reg
[Thu Dec 29 04:25:36 2011] Extracting stamp from image fullrun_mos2_xmm0611180501_pi300-10000_cl_sm2.00.img.gz, (84, 186) - (327, 428)
[Thu Dec 29 04:25:36 2011] XMMSAS bgd. selection expression = annulus(17844.471600, 26652.360800, 7031.840202, 14063.680405, X, Y) && !ellipse(23910.740400, 17381.724740, 1442.160041, 1442.160041, 0.000000, X, Y) && !ellipse(25001.658080, 17650.526000, 1642.048047, 1642.048047, 0.000000, X, Y) && !ellipse(24634.303800, 15244.910000, 906.440026, 906.440026, 0.000000, X, Y) && !ellipse(24694.156097, 31535.351501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24514.301758, 16715.120010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25514.521700, 31464.095800, 1233.984036, 1233.984036, 0.000000, X, Y) && !ellipse(25015.481018, 16757.435867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24647.401031, 31892.686584, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24278.992000, 31543.554000, 1411.976041, 953.688027, 348.394000, X, Y) && !ellipse(24175.859863, 14978.627304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25243.089329, 32574.576853, 1267.400036, 170.678249, 90.000000, X, Y) && !ellipse(24568.476000, 16175.868400, 1070.256031, 486.110414, 92.508210, X, Y) && !ellipse(23883.403880, 16847.391000, 792.506423, 792.506423, 0.000000, X, Y) && !ellipse(22533.599800, 31643.428800, 1466.936042, 1466.936042, 0.000000, X, Y) && !ellipse(24369.571743, 12737.077869, 1716.023868, 541.514101, 90.000000, X, Y) && !ellipse(24928.048000, 13479.760000, 3684.944106, 3684.944106, 0.000000, X, Y) && !ellipse(24660.411800, 32530.732000, 633.701618, 633.701618, 0.000000, X, Y) && !ellipse(31630.175873, 25960.291779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25575.698000, 32983.910000, 1113.456032, 1113.456032, 0.000000, X, Y) && !ellipse(24285.966583, 12332.107376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26162.010284, 31487.449463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23726.774000, 15639.788000, 729.672021, 729.672021, 0.000000, X, Y) && !ellipse(31489.002655, 21613.617203, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24547.846200, 14354.327600, 772.588822, 772.588822, 0.000000, X, Y) && !ellipse(20160.011230, 17679.291245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31635.649800, 24319.893000, 1431.120041, 554.591216, 93.019030, X, Y) && !ellipse(25361.640000, 32251.815000, 1340.088039, 1340.088039, 0.000000, X, Y) && !ellipse(17916.993362, 25007.391144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22200.638000, 31694.088400, 1493.040043, 1493.040043, 0.000000, X, Y) && !ellipse(31671.683200, 23390.153000, 1367.376039, 1367.376039, 0.000000, X, Y) && !ellipse(31489.000000, 26372.354980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26157.127686, 32835.537933, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31672.876709, 20540.522064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17854.547073, 25714.478546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17920.198200, 27101.373540, 1571.232045, 663.682419, 102.471100, X, Y) && !ellipse(22828.018000, 31678.834000, 1466.232042, 1466.232042, 0.000000, X, Y) && !ellipse(26669.632420, 31343.727600, 1108.720032, 1108.720032, 0.000000, X, Y) && !ellipse(32001.271973, 25102.653595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26341.543365, 32048.847443, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27138.338000, 31712.124000, 1461.688042, 1461.688042, 0.000000, X, Y) && !ellipse(17627.828400, 23565.098600, 1011.687606, 1011.687606, 0.000000, X, Y) && !ellipse(18089.940643, 27798.918152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31397.332736, 19944.197783, 2125.536061, 810.058637, 99.625191, X, Y) && !ellipse(27713.228000, 31520.184000, 2923.376084, 2923.376084, 0.000000, X, Y) && !ellipse(25265.621948, 15520.951553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20395.520000, 31743.091400, 1583.648046, 1583.648046, 0.000000, X, Y) && !ellipse(25453.500000, 33468.884000, 2185.920063, 418.517612, 90.000000, X, Y) && !ellipse(31623.944000, 22486.193582, 1462.792042, 1462.792042, 0.000000, X, Y) && !ellipse(21379.835200, 31712.351800, 1521.856044, 1521.856044, 0.000000, X, Y) && !ellipse(31632.716736, 26950.033600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17856.747000, 28203.690000, 1596.224046, 1596.224046, 0.000000, X, Y) && !ellipse(17254.875519, 25180.137970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32424.406647, 23527.491089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23788.578705, 12130.233551, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23304.684000, 13047.954000, 1843.760053, 1843.760053, 0.000000, X, Y) && !ellipse(24909.471008, 12226.228790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17166.666153, 26331.677277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25301.151550, 34742.087921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25751.714800, 35647.124600, 1092.960031, 1092.960031, 0.000000, X, Y) && !ellipse(24526.189600, 33672.970000, 1529.512044, 1529.512044, 0.000000, X, Y) && !ellipse(23812.768677, 13869.869812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31230.848846, 20943.331161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19420.384000, 31890.011340, 1582.048046, 1582.048046, 0.000000, X, Y) && !ellipse(25701.324400, 36645.396400, 537.620815, 537.620815, 0.000000, X, Y) && !ellipse(25894.524000, 37906.642000, 1843.464053, 917.584026, 91.551171, X, Y)
[Thu Dec 29 04:25:36 2011] Writing fullrun_mos2_xmm0611180501_pi300-10000_pass1_cl_src56.gif
[Thu Dec 29 06:55:46 2011] Mean detx,y = (-7549.53, -1856.67) 
[Thu Dec 29 06:55:51 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec 29 07:04:23 2011] Binned source spectrum to 10 counts/bin
[Thu Dec 29 07:04:24 2011] Setting source spectrum file to fullrun_mos2_xmm0611180501_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Thu Dec 29 07:04:24 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0611180501_pi300-10000_pass1_cl_src56_bgd.pi.gz
[Thu Dec 29 13:49:56 2011] Updating aperture counts using extracted products
[Thu Dec 29 13:49:56 2011] Error reading totcts from fullrun_mos2_xmm0611180501_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Thu Dec 29 13:50:03 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec 29 13:50:03 2011] Using photon index=1.80, rate=0.226, arf fullrun_mos2_xmm0611180501_pi300-10000_pass1_cl_src56.arf
[Thu Dec 29 13:50:03 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec 29 13:50:03 2011] Updating source flux to 3.5e-12
[Thu Dec 29 14:00:19 2011] Flag c found in src. 56 procflags, skipping spectral fitting