[Sun Dec 25 22:34:08 2011] Detection parameters:
  Position = (282.3, 192.7) = 5 34 32.65 21 54 43.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 326.6 +/- 26.3
  Background counts = 164.0
  Rate = 0.09 +/- 0.007

[Sun Dec 25 22:34:13 2011] Off-axis axis estimate = 7.76'
[Mon Dec 26 09:02:06 2011] Using EEF radius (= 10.31 ")to estimate initial spatial extent for simple fitting
[Mon Dec 26 09:02:06 2011] Initial guess for spatial extent in simple fitting = 10.31"
[Mon Dec 26 09:02:06 2011] source mask rpix=2.4, npix_max = 32, mask sum = 32, frac = 0.972
[Mon Dec 26 09:02:06 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 10.31"
[Tue Dec 27 04:04:28 2011] fullrun_mos2_xmm0611180501_pi300-10000_cl_pass0_src5.ximg exists
[Tue Dec 27 04:04:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180501_pi300-10000_cl_pass0_src5.csv
[Tue Dec 27 04:04:28 2011] fullrun_mos2_xmm0611180501_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue Dec 27 04:04:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180501_pi300-10000_cl_pass0_src5.csv
[Tue Dec 27 04:04:28 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180501_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180501_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 27 04:04:31 2011] fullrun_mos2_xmm0611180501_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue Dec 27 04:04:31 2011] fullrun_mos2_xmm0611180501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue Dec 27 04:04:31 2011] Fit fullrun_mos2_xmm0611180501_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Tue Dec 27 04:06:00 2011] Source 11 is offset by -1.126911 and 4.340713 pixels which is larger than
2 X fitted extent = 1.185494 x 1.185494, not incorporating fit results
[Tue Dec 27 04:06:00 2011] Source 11 is offset by -1.257681 and 6.012007 pixels which is larger than
2 X fitted extent = 3.915389 x 3.915389, not incorporating fit results
[Tue Dec 27 04:06:01 2011] Source 11 is offset by -1.516049 and 2.838368 pixels which is larger than
2 X fitted extent = 1.246395 x 1.246395, not incorporating fit results
[Tue Dec 27 04:06:01 2011] Vigneting correction estimate = 1.000000
[Tue Dec 27 04:06:01 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Dec 27 04:06:01 2011] Assessing source extent using major
[Tue Dec 27 04:06:01 2011] Source does appear to be extended
[Tue Dec 27 04:06:01 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 27 04:06:01 2011] Source is confused with source 8
[Tue Dec 27 04:06:01 2011] Source is confused with source 10
[Tue Dec 27 04:06:01 2011] Source is confused with source 75
[Tue Dec 27 20:19:21 2011] Using EEF radius (= 10.31 ")to estimate initial spatial extent for simple fitting
[Tue Dec 27 20:19:21 2011] Initial guess for spatial extent in simple fitting = 10.31"
[Tue Dec 27 20:19:21 2011] source mask rpix=2.4, npix_max = 32, mask sum = 32, frac = 0.972
[Tue Dec 27 20:19:21 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 10.31"
[Wed Dec 28 21:07:28 2011] fullrun_mos2_xmm0611180501_pi300-10000_cl_pass1_src5.ximg exists
[Wed Dec 28 21:07:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180501_pi300-10000_cl_pass1_src5.csv
[Wed Dec 28 21:07:28 2011] fullrun_mos2_xmm0611180501_pi300-10000_cl_pass1_src5_1.ximg exists
[Wed Dec 28 21:07:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180501_pi300-10000_cl_pass1_src5.csv
[Wed Dec 28 21:07:28 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180501_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180501_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 21:07:30 2011] fullrun_mos2_xmm0611180501_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Wed Dec 28 21:07:30 2011] fullrun_mos2_xmm0611180501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Wed Dec 28 21:07:30 2011] Fit fullrun_mos2_xmm0611180501_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Wed Dec 28 21:08:36 2011] Source 11 is offset by -1.239341 and 6.266437 pixels which is larger than
2 X fitted extent = 1.999310 x 1.999310, not incorporating fit results
[Wed Dec 28 21:08:36 2011] Warning, spatial fit 5 centroid is now closest to src. 8
[Wed Dec 28 21:08:37 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 21:08:37 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 21:08:37 2011] Assessing source extent using major
[Wed Dec 28 21:08:37 2011] Source does appear to be extended
[Wed Dec 28 21:08:37 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 04:25:32 2011] XMMSAS src. selection expression = ellipse(24514.301758, 16715.120010, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Dec 29 04:25:32 2011] Writing source region out to fullrun_mos2_xmm0611180501_pi300-10000_pass1_cl_src11_src.reg
[Thu Dec 29 04:25:32 2011] Extracting stamp from image fullrun_mos2_xmm0611180501_pi300-10000_cl_sm2.00.img.gz, (245, 155) - (320, 230)
[Thu Dec 29 04:25:32 2011] XMMSAS bgd. selection expression = annulus(24514.301758, 16715.120010, 1087.500000, 2175.000000, X, Y) && !ellipse(23910.740400, 17381.724740, 1442.160041, 1442.160041, 0.000000, X, Y) && !ellipse(25001.658080, 17650.526000, 1642.048047, 1642.048047, 0.000000, X, Y) && !ellipse(24634.303800, 15244.910000, 906.440026, 906.440026, 0.000000, X, Y) && !ellipse(25015.481018, 16757.435867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24175.859863, 14978.627304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24568.476000, 16175.868400, 1070.256031, 486.110414, 92.508210, X, Y) && !ellipse(23883.403880, 16847.391000, 792.506423, 792.506423, 0.000000, X, Y) && !ellipse(24928.048000, 13479.760000, 3684.944106, 3684.944106, 0.000000, X, Y) && !ellipse(23726.774000, 15639.788000, 729.672021, 729.672021, 0.000000, X, Y) && !ellipse(24547.846200, 14354.327600, 772.588822, 772.588822, 0.000000, X, Y) && !ellipse(25265.621948, 15520.951553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23304.684000, 13047.954000, 1843.760053, 1843.760053, 0.000000, X, Y) && !ellipse(23812.768677, 13869.869812, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Dec 29 04:25:32 2011] Writing fullrun_mos2_xmm0611180501_pi300-10000_pass1_cl_src11.gif
[Thu Dec 29 04:29:49 2011] Mean detx,y = (309.67, 7652.70) 
[Thu Dec 29 04:29:52 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec 29 04:30:33 2011] Binned source spectrum to 10 counts/bin
[Thu Dec 29 04:30:34 2011] Setting source spectrum file to fullrun_mos2_xmm0611180501_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Thu Dec 29 04:30:34 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0611180501_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Thu Dec 29 08:02:21 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Dec 29 08:02:21 2011] rmf not generated due to insufficient counts
[Thu Dec 29 13:49:51 2011] Updating aperture counts using extracted products
[Thu Dec 29 13:49:51 2011] Error reading totcts from fullrun_mos2_xmm0611180501_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Thu Dec 29 13:49:59 2011] Calculating source flux in energy range 0.30-8.00
[Thu Dec 29 13:49:59 2011] Using photon index=1.80, rate=0.0874, arf fullrun_mos2_xmm0611180501_pi300-10000_pass1_cl_src11.arf
[Thu Dec 29 13:49:59 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Dec 29 13:49:59 2011] Updating source flux to 2.9e-12
[Thu Dec 29 14:00:19 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting