[Sun Dec 25 22:32:30 2011] Detection parameters:
  Position = (248.1, 205.2) = 5 34 43.34 21 55 39.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 88.5 +/- 15.8
  Background counts = 222.0
  Rate = 0.01 +/- 0.002

[Sun Dec 25 22:32:32 2011] Off-axis axis estimate = 7.68'
[Sun Dec 25 22:38:25 2011] Using EEF radius (= 10.27 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 22:38:25 2011] Initial guess for spatial extent in simple fitting = 10.27"
[Sun Dec 25 22:38:25 2011] source mask rpix=2.4, npix_max = 32, mask sum = 35, frac = 1.069
[Sun Dec 25 22:38:25 2011] Giving source the simple spatial ID 51 for pass 0, mean size = 10.27"
[Mon Dec 26 09:02:03 2011] fullrun_mos1_xmm0611180501_pi300-10000_cl_pass0_src51.ximg exists
[Mon Dec 26 09:02:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180501_pi300-10000_cl_pass0_src51.csv
[Mon Dec 26 09:02:03 2011] fullrun_mos1_xmm0611180501_pi300-10000_cl_pass0_src51_1.ximg exists
[Mon Dec 26 09:02:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180501_pi300-10000_cl_pass0_src51.csv
[Mon Dec 26 09:02:03 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180501_pi300-10000_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180501_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 26 09:02:05 2011] fullrun_mos1_xmm0611180501_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Mon Dec 26 09:02:05 2011] fullrun_mos1_xmm0611180501_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Mon Dec 26 09:02:05 2011] Fit fullrun_mos1_xmm0611180501_pi300-10000_cl_pass0_tfrozen_src51 appears to have run properly
[Tue Dec 27 04:05:17 2011] Spatial fit model total counts = 2128.760000, observed total counts = 2295.000000
[Tue Dec 27 04:05:17 2011] Offset between fit and detection position for source 59 = 1.489990 pixels
[Tue Dec 27 04:05:17 2011] Warning, changing simple spatial fit ID from 51 to 13
Spatial fit parameters:
  Offset between fit and detection position for source 59 = 1.489990 pixels
  Position = (249.5, 204.6) = 5 34 42.91 21 55 28.0
  Extent = 18.4 (17.4-19.1)", rotation angle = 0
  Source counts = 1560.4 +/- 39.5
  Background counts = 0.0
  Rate = 0.2 +/- 0.006
 Deleting source due to low signal-to-noise ratio