[Wed Aug 29 10:07:15 2012] Detection parameters:
  Position = (291.5, 383.9) = 5 34 29.78 22 8 31.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 210.5 +/- 23.1
  Background counts = 255.6
  Rate = 0.04 +/- 0.005

[Wed Aug 29 10:07:16 2012] Off-axis axis estimate = 6.22'
[Wed Aug 29 12:43:53 2012] Using EEF radius (= 9.54 ")to estimate initial spatial extent for simple fitting
[Wed Aug 29 12:43:53 2012] Initial guess for spatial extent in simple fitting = 9.54"
[Wed Aug 29 12:43:53 2012] source mask rpix=2.2, npix_max = 29, mask sum = 15, frac = 0.517
[Wed Aug 29 12:43:53 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 9.54"
[Wed Aug 29 16:58:41 2012] fullrun_mos2_xmm0611180401_pi300-10000_cl_pass0_src30.ximg exists
[Wed Aug 29 16:58:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180401_pi300-10000_cl_pass0_src30.csv
[Wed Aug 29 16:58:41 2012] fullrun_mos2_xmm0611180401_pi300-10000_cl_pass0_src30_1.ximg exists
[Wed Aug 29 16:58:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180401_pi300-10000_cl_pass0_src30.csv
[Wed Aug 29 16:58:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180401_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180401_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 29 16:58:42 2012] fullrun_mos2_xmm0611180401_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Wed Aug 29 16:58:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180401_pi300-10000_cl_pass0_tfrozen_src30.csv
[Wed Aug 29 16:58:42 2012] fullrun_mos2_xmm0611180401_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Wed Aug 29 16:58:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180401_pi300-10000_cl_pass0_tfrozen_src30.csv
[Wed Aug 29 16:58:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180401_pi300-10000_cl_pass0_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180401_pi300-10000_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 29 16:59:06 2012] Warning, spatial fit 30 centroid is now closest to src. 18
[Wed Aug 29 16:59:06 2012] Vigneting correction estimate = 1.000000
[Wed Aug 29 16:59:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 29 16:59:06 2012] Assessing source extent using major
[Wed Aug 29 16:59:06 2012] Source does appear to be extended
[Wed Aug 29 16:59:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 29 16:59:06 2012] Source is confused with source 22
[Wed Aug 29 18:53:16 2012] Using EEF radius (= 9.54 ")to estimate initial spatial extent for simple fitting
[Wed Aug 29 18:53:16 2012] Initial guess for spatial extent in simple fitting = 9.54"
[Wed Aug 29 18:53:16 2012] source mask rpix=2.2, npix_max = 29, mask sum = 15, frac = 0.517
[Wed Aug 29 18:53:16 2012] Giving source the simple spatial ID 24 for pass 1, mean size = 9.54"
[Wed Aug 29 23:21:54 2012] fullrun_mos2_xmm0611180401_pi300-10000_cl_pass1_src24.ximg exists
[Wed Aug 29 23:21:54 2012] fullrun_mos2_xmm0611180401_pi300-10000_cl_pass1_src24_1.ximg exists
[Wed Aug 29 23:21:54 2012] Fit fullrun_mos2_xmm0611180401_pi300-10000_cl_pass1_src24 appears to have run properly
[Wed Aug 29 23:21:55 2012] fullrun_mos2_xmm0611180401_pi300-10000_cl_pass1_tfrozen_src24.ximg exists
[Wed Aug 29 23:21:55 2012] fullrun_mos2_xmm0611180401_pi300-10000_cl_pass1_tfrozen_src24_1.ximg exists
[Wed Aug 29 23:21:55 2012] Fit fullrun_mos2_xmm0611180401_pi300-10000_cl_pass1_tfrozen_src24 appears to have run properly
[Wed Aug 29 23:22:19 2012] Spatial fit model total counts = 3320.580000, observed total counts = 3019.000000
[Wed Aug 29 23:22:19 2012] Offset between fit and detection position for source 20 = 4.294636 pixels
[Wed Aug 29 23:22:19 2012] 3278.168000 total counts/ 2767.710000 bgd. counts: snr = 9.702859
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 4.294636 pixels
  Position = (294.9, 381.3) = 5 34 28.72 22 8 16.2
  Extent = 19.1 (19.0-38.2)", rotation angle = 0
  Source counts = 510.5 +/- 57.3
  Background counts = 2767.7
  Rate = 0.06 +/- 0.007
[Wed Aug 29 23:22:20 2012] Vigneting correction estimate = 1.000000
[Wed Aug 29 23:22:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 29 23:22:20 2012] Assessing source extent using major axis lower bound
[Wed Aug 29 23:22:20 2012] Source does appear to be extended
[Wed Aug 29 23:22:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 29 23:45:34 2012] XMMSAS src. selection expression = ellipse(25607.054000, 33124.278000, 1144.548033, 1144.548033, 0.000000, X, Y)
[Wed Aug 29 23:45:34 2012] Writing source region out to fullrun_mos2_xmm0611180401_pi300-10000_pass1_cl_src20_src.reg
[Wed Aug 29 23:45:34 2012] Extracting stamp from image fullrun_mos2_xmm0611180401_pi300-10000_cl_sm2.00.img.gz, (229, 316) - (361, 447)
[Wed Aug 29 23:45:34 2012] XMMSAS bgd. selection expression = annulus(25607.054000, 33124.278000, 1907.580055, 3815.160110, X, Y) && !ellipse(24763.261200, 31533.516876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24765.661346, 32616.381195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25346.190000, 31994.173400, 1437.008041, 1437.008041, 0.000000, X, Y) && !ellipse(24089.337769, 31566.187012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23399.396545, 31637.944489, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26167.358000, 31155.642000, 1710.720049, 1710.720049, 356.555000, X, Y) && !ellipse(23495.707733, 32684.349945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22738.129639, 31666.563049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21476.122528, 31699.671265, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25138.509766, 32831.324402, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26001.014618, 32041.392120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22291.099701, 31675.993713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25978.616791, 35797.897491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27149.686493, 31346.661224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25399.007965, 36580.796600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25420.351746, 35390.663788, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 29 23:45:34 2012] Writing fullrun_mos2_xmm0611180401_pi300-10000_pass1_cl_src20.gif
[Wed Aug 29 23:53:13 2012] Mean detx,y = (492.98, -8714.19) 
[Wed Aug 29 23:53:14 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 29 23:53:23 2012] grppha failed
[Wed Aug 29 23:53:23 2012] Setting source spectrum file to fullrun_mos2_xmm0611180401_pi300-10000_pass1_cl_src20_src.pi.gz
[Wed Aug 29 23:53:23 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0611180401_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Thu Aug 30 00:10:40 2012] Updating aperture counts using extracted products
[Thu Aug 30 00:10:40 2012] Error reading totcts from fullrun_mos2_xmm0611180401_pi300-10000_pass1_cl_src20_src.pi.gz
[Thu Aug 30 00:10:40 2012] No arf file for this source, not re-computing flux
[Thu Aug 30 00:10:42 2012] Flag c found in src. 20 procflags, skipping spectral fitting
[Thu Aug 30 00:10:42 2012] Source 20 has no response, skipping
[Thu Aug 30 00:10:43 2012] xmm0611180401/analysis//spectral/fullrun_mos2_xmm0611180401_pi300-10000_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete