[Wed Aug 29 10:07:15 2012] Detection parameters:
  Position = (279.0, 123.0) = 5 34 33.69 21 49 32.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 506.4 +/- 32.5
  Background counts = 77.3
  Rate = 0.06 +/- 0.004

[Wed Aug 29 10:07:16 2012] Off-axis axis estimate = 12.80'
[Wed Aug 29 12:43:53 2012] Using EEF radius (= 12.83 ")to estimate initial spatial extent for simple fitting
[Wed Aug 29 12:43:53 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Aug 29 12:43:53 2012] Initial guess for spatial extent in simple fitting = 12.83"
[Wed Aug 29 12:43:53 2012] source mask rpix=2.9, npix_max = 47, mask sum = 36, frac = 0.757
[Wed Aug 29 12:43:53 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 12.83"
[Wed Aug 29 16:58:41 2012] fullrun_mos2_xmm0611180401_pi300-10000_cl_pass0_src17.ximg exists
[Wed Aug 29 16:58:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180401_pi300-10000_cl_pass0_src17.csv
[Wed Aug 29 16:58:41 2012] fullrun_mos2_xmm0611180401_pi300-10000_cl_pass0_src17_1.ximg exists
[Wed Aug 29 16:58:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180401_pi300-10000_cl_pass0_src17.csv
[Wed Aug 29 16:58:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180401_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180401_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 29 16:58:42 2012] fullrun_mos2_xmm0611180401_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Wed Aug 29 16:58:42 2012] fullrun_mos2_xmm0611180401_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Wed Aug 29 16:58:42 2012] Fit fullrun_mos2_xmm0611180401_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Wed Aug 29 16:59:06 2012] Warning, spatial fit 17 centroid is now closest to src. 96
[Wed Aug 29 16:59:06 2012] Vigneting correction estimate = 1.000000
[Wed Aug 29 16:59:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 29 16:59:06 2012] Assessing source extent using major
[Wed Aug 29 16:59:06 2012] Source does appear to be extended
[Wed Aug 29 16:59:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 29 16:59:06 2012] Source is confused with source 1
[Wed Aug 29 18:53:16 2012] Using EEF radius (= 12.83 ")to estimate initial spatial extent for simple fitting
[Wed Aug 29 18:53:16 2012] Initial guess for spatial extent in simple fitting = 12.83"
[Wed Aug 29 18:53:16 2012] source mask rpix=2.9, npix_max = 47, mask sum = 36, frac = 0.757
[Wed Aug 29 18:53:16 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 12.83"
[Wed Aug 29 23:21:54 2012] fullrun_mos2_xmm0611180401_pi300-10000_cl_pass1_src12.ximg exists
[Wed Aug 29 23:21:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180401_pi300-10000_cl_pass1_src12.csv
[Wed Aug 29 23:21:54 2012] fullrun_mos2_xmm0611180401_pi300-10000_cl_pass1_src12_1.ximg exists
[Wed Aug 29 23:21:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180401_pi300-10000_cl_pass1_src12.csv
[Wed Aug 29 23:21:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180401_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180401_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 29 23:21:55 2012] fullrun_mos2_xmm0611180401_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Wed Aug 29 23:21:55 2012] fullrun_mos2_xmm0611180401_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Wed Aug 29 23:21:55 2012] Fit fullrun_mos2_xmm0611180401_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Wed Aug 29 23:22:19 2012] Spatial fit model total counts = 6181.570000, observed total counts = 6077.000000
[Wed Aug 29 23:22:19 2012] Offset between fit and detection position for source 2 = 6.295170 pixels
[Wed Aug 29 23:22:19 2012] Warning, changing simple spatial fit ID from 12 to 9
[Wed Aug 29 23:22:19 2012] 5816.730000 total counts/ 4526.030000 bgd. counts: snr = 19.185212
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 6.295170 pixels
  Position = (280.3, 129.2) = 5 34 33.27 21 49 59.5
  Extent = 22.8 (19.3-37.6)", rotation angle = 0
  Source counts = 1290.7 +/- 76.3
  Background counts = 4526.0
  Rate = 0.2 +/- 0.009
[Wed Aug 29 23:22:20 2012] Vigneting correction estimate = 1.000000
[Wed Aug 29 23:22:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 29 23:22:20 2012] Assessing source extent using major axis lower bound
[Wed Aug 29 23:22:20 2012] Source does appear to be extended
[Wed Aug 29 23:22:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 29 23:45:34 2012] Counts = 1290.700000, rescaling region sizes by 2.000000
[Wed Aug 29 23:45:34 2012] XMMSAS src. selection expression = ellipse(24338.220400, 11189.838000, 2737.272079, 2737.272079, 0.000000, X, Y)
[Wed Aug 29 23:45:34 2012] Writing source region out to fullrun_mos2_xmm0611180401_pi300-10000_pass1_cl_src2_src.reg
[Wed Aug 29 23:45:34 2012] Extracting stamp from image fullrun_mos2_xmm0611180401_pi300-10000_cl_sm2.00.img.gz, (123, 0) - (438, 286)
[Wed Aug 29 23:45:34 2012] XMMSAS bgd. selection expression = annulus(24338.220400, 11189.838000, 9124.240263, 18248.480525, X, Y) && !ellipse(24584.521973, 17485.152847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23617.208000, 17279.662800, 1517.360044, 1517.360044, 0.000000, X, Y) && !ellipse(31917.174000, 23118.681400, 1508.816043, 517.340815, 0.000000, X, Y) && !ellipse(25243.542800, 17144.974000, 1674.952048, 1674.952048, 0.000000, X, Y) && !ellipse(31700.231476, 25791.731934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24265.838000, 11539.442000, 1504.312043, 1504.312043, 0.000000, X, Y) && !ellipse(31585.977600, 24995.520508, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24089.977631, 16913.539642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24148.738739, 9780.528641, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24504.382568, 15781.087341, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24243.281677, 8656.630180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24448.498000, 14471.080000, 508.917615, 508.917615, 0.000000, X, Y) && !ellipse(31719.732666, 23787.508728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31694.175354, 24483.121094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23878.557648, 14641.986847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32113.668000, 26220.000000, 1481.600043, 1481.600043, 0.000000, X, Y) && !ellipse(20109.057236, 17683.079971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24261.518400, 10080.480000, 1172.936034, 1172.936034, 0.000000, X, Y) && !ellipse(24574.826000, 15243.614000, 1743.944050, 1743.944050, 0.000000, X, Y) && !ellipse(25381.444946, 16234.562363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24031.471405, 15854.171005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17906.418381, 24666.347321, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24221.205109, 7915.249092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31598.384552, 20560.104233, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32220.455261, 23705.627625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31520.047913, 21167.516525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18118.381317, 28391.348114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23889.899933, 14137.127716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25182.591217, 15859.295212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24026.602081, 17351.338043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32002.376000, 22489.716100, 1517.360044, 498.612814, 11.929000, X, Y) && !ellipse(17342.685303, 26858.875824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32400.803436, 24754.257996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23761.223938, 12656.070068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23738.334930, 8545.035980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32357.188000, 20291.152400, 1582.216046, 694.851220, 0.000000, X, Y) && !ellipse(24694.947296, 10135.935509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31977.987366, 21705.563522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23673.241577, 10654.299446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32510.405701, 23017.308624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31633.725647, 26908.867371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23716.603516, 10132.551674, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32663.986000, 21213.526000, 1552.632045, 1552.632045, 0.000000, X, Y) && !ellipse(17873.774796, 26316.567505, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32258.175262, 27187.496765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32264.230600, 25913.932200, 938.392027, 938.392027, 0.000000, X, Y) && !ellipse(32717.845795, 23604.550659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32093.446625, 28095.200836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23647.546204, 7882.098396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31791.080000, 19982.538800, 1627.816047, 1627.816047, 0.000000, X, Y) && !ellipse(32687.427124, 26479.527893, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32490.317749, 19786.159210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17417.968658, 23710.162415, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17330.772186, 22910.568481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32511.194244, 25209.359222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17201.862549, 25100.375580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31711.450000, 27258.625740, 1459.832042, 1459.832042, 0.000000, X, Y) && !ellipse(18138.668396, 27520.564880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25216.352570, 11632.241653, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21231.662033, 17650.810745, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31750.002655, 28679.004608, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 29 23:45:34 2012] Writing fullrun_mos2_xmm0611180401_pi300-10000_pass1_cl_src2.gif
[Wed Aug 29 23:48:12 2012] Mean detx,y = (396.94, 12946.58) 
[Wed Aug 29 23:48:13 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 29 23:51:10 2012] grppha failed
[Wed Aug 29 23:51:10 2012] Setting source spectrum file to fullrun_mos2_xmm0611180401_pi300-10000_pass1_cl_src2_src.pi.gz
[Wed Aug 29 23:51:10 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0611180401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Aug 30 00:10:40 2012] Updating aperture counts using extracted products
[Thu Aug 30 00:10:40 2012] Error reading totcts from fullrun_mos2_xmm0611180401_pi300-10000_pass1_cl_src2_src.pi.gz
[Thu Aug 30 00:10:40 2012] No arf file for this source, not re-computing flux
[Thu Aug 30 00:10:42 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Thu Aug 30 00:10:42 2012] Source 2 has no response, skipping
[Thu Aug 30 00:10:43 2012] xmm0611180401/analysis//spectral/fullrun_mos2_xmm0611180401_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete