[Wed Aug 29 10:06:42 2012] Detection parameters:
  Position = (281.0, 202.5) = 5 34 33.06 21 55 18.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 534.9 +/- 37.5
  Background counts = 275.3
  Rate = 0.09 +/- 0.006

[Wed Aug 29 10:06:43 2012] Off-axis axis estimate = 7.07'
[Wed Aug 29 10:08:44 2012] Using EEF radius (= 9.96 ")to estimate initial spatial extent for simple fitting
[Wed Aug 29 10:08:44 2012] Initial guess for spatial extent in simple fitting = 9.96"
[Wed Aug 29 10:08:44 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.963
[Wed Aug 29 10:08:44 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 9.96"
[Wed Aug 29 12:43:52 2012] fullrun_mos1_xmm0611180401_pi300-10000_cl_pass0_src1.ximg exists
[Wed Aug 29 12:43:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180401_pi300-10000_cl_pass0_src1.csv
[Wed Aug 29 12:43:52 2012] fullrun_mos1_xmm0611180401_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Aug 29 12:43:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180401_pi300-10000_cl_pass0_src1.csv
[Wed Aug 29 12:43:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 29 12:43:53 2012] fullrun_mos1_xmm0611180401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Aug 29 12:43:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Aug 29 12:43:53 2012] fullrun_mos1_xmm0611180401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Aug 29 12:43:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180401_pi300-10000_cl_pass0_tfrozen_src1.csv
[Wed Aug 29 12:43:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180401_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 29 16:58:54 2012] Warning, spatial fit 1 centroid is now closest to src. 6
[Wed Aug 29 16:58:54 2012] Spatial fit model total counts = 4366.080000, observed total counts = 4409.000000
[Wed Aug 29 16:58:54 2012] Offset between fit and detection position for source 5 = 7.307073 pixels
[Wed Aug 29 16:58:54 2012] Warning, changing simple spatial fit ID from 1 to 37
[Wed Aug 29 16:58:54 2012] 4399.280000 total counts/ 4160.010000 bgd. counts: snr = 3.709719
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 7.307073 pixels
  Position = (276.6, 208.4) = 5 34 34.42 21 55 44.0
  Extent = 20.4 (20.4-40.8)", rotation angle = 0
  Source counts = 239.3 +/- 66.3
  Background counts = 4160.0
  Rate = 0.03 +/- 0.008
[Wed Aug 29 16:58:54 2012] Vigneting correction estimate = 1.000000
[Wed Aug 29 16:58:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 29 16:58:54 2012] Assessing source extent using major axis lower bound
[Wed Aug 29 16:58:54 2012] Source does appear to be extended
[Wed Aug 29 16:58:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 29 16:58:54 2012] Source is confused with source 6
[Wed Aug 29 16:58:54 2012] Source is confused with source 44
[Wed Aug 29 16:58:54 2012] Source is confused with source 45
[Wed Aug 29 16:58:54 2012] Source is confused with source 47
[Wed Aug 29 16:59:18 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug 29 16:59:18 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Aug 29 16:59:18 2012] Initial guess for spatial extent in simple fitting = 20.39"
[Wed Aug 29 16:59:18 2012] source mask rpix=4.7, npix_max = 107, mask sum = 33, frac = 0.306
[Wed Aug 29 16:59:18 2012] Skipping simple spatial due to low active detector fraction
[Wed Aug 29 23:22:06 2012] Vigneting correction estimate = 1.000000
[Wed Aug 29 23:22:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 29 23:22:06 2012] Assessing source extent using major axis lower bound
[Wed Aug 29 23:22:06 2012] Source does appear to be extended
[Wed Aug 29 23:22:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 29 23:22:31 2012] XMMSAS src. selection expression = ellipse(24019.788000, 18080.276000, 1223.664035, 1223.664035, 0.000000, X, Y)
[Wed Aug 29 23:22:31 2012] Writing source region out to fullrun_mos1_xmm0611180401_pi300-10000_pass1_cl_src5_src.reg
[Wed Aug 29 23:22:31 2012] Extracting stamp from image fullrun_mos1_xmm0611180401_pi300-10000_cl_sm2.00.img.gz, (206, 138) - (347, 279)
[Wed Aug 29 23:22:31 2012] XMMSAS bgd. selection expression = annulus(24019.788000, 18080.276000, 2039.440059, 4078.880117, X, Y) && !ellipse(24417.113800, 17333.326000, 3264.816094, 3264.816094, 0.000000, X, Y) && !ellipse(24262.453600, 10637.514000, 3667.808106, 3667.808106, 0.000000, X, Y) && !ellipse(21243.924000, 17906.448200, 1658.016048, 820.576024, 89.644000, X, Y) && !ellipse(20136.443000, 17860.632000, 1701.728049, 1701.728049, 0.000000, X, Y) && !ellipse(23435.181030, 17630.724121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22909.442749, 17698.781815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25803.355652, 17486.186981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23559.423126, 17183.037064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22179.982742, 17657.042099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21213.556000, 16825.148000, 1167.392034, 1167.392034, 0.000000, X, Y) && !ellipse(20313.648000, 16977.284000, 2334.784067, 291.848008, 92.350000, X, Y) && !ellipse(22666.868600, 17034.412200, 610.548818, 610.548818, 0.000000, X, Y) && !ellipse(24392.776600, 16760.672000, 1699.976049, 1699.976049, 0.000000, X, Y) && !ellipse(23484.280487, 16565.429459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24324.021118, 15970.957779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24307.655518, 15178.824478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23893.372711, 14740.014511, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24598.333200, 14531.918000, 1774.952051, 1774.952051, 0.000000, X, Y) && !ellipse(24205.362549, 14129.090942, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 29 23:22:31 2012] Writing fullrun_mos1_xmm0611180401_pi300-10000_pass1_cl_src5.gif
[Wed Aug 29 23:23:17 2012] Mean detx,y = (7106.53, 40.14) 
[Wed Aug 29 23:23:18 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 29 23:23:29 2012] grppha failed
[Wed Aug 29 23:23:29 2012] Setting source spectrum file to fullrun_mos1_xmm0611180401_pi300-10000_pass1_cl_src5_src.pi.gz
[Wed Aug 29 23:23:29 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0611180401_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Thu Aug 30 00:10:39 2012] Updating aperture counts using extracted products
[Thu Aug 30 00:10:39 2012] Error reading totcts from fullrun_mos1_xmm0611180401_pi300-10000_pass1_cl_src5_src.pi.gz
[Thu Aug 30 00:10:40 2012] No arf file for this source, not re-computing flux
[Thu Aug 30 00:10:41 2012] Flag c found in src. 5 procflags, skipping spectral fitting
[Thu Aug 30 00:10:41 2012] Source 5 has no response, skipping
[Thu Aug 30 00:10:42 2012] xmm0611180401/analysis//spectral/fullrun_mos1_xmm0611180401_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete