[Wed Aug 29 10:06:43 2012] Detection parameters:
  Position = (229.2, 205.5) = 5 34 49.26 21 55 43.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 160.3 +/- 21.6
  Background counts = 251.5
  Rate = 0.02 +/- 0.003

[Wed Aug 29 10:06:43 2012] Off-axis axis estimate = 8.40'
[Wed Aug 29 10:08:44 2012] Using EEF radius (= 10.63 ")to estimate initial spatial extent for simple fitting
[Wed Aug 29 10:08:44 2012] Initial guess for spatial extent in simple fitting = 10.63"
[Wed Aug 29 10:08:44 2012] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.865
[Wed Aug 29 10:08:44 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 10.63"
[Wed Aug 29 12:43:52 2012] fullrun_mos1_xmm0611180401_pi300-10000_cl_pass0_src33.ximg exists
[Wed Aug 29 12:43:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180401_pi300-10000_cl_pass0_src33.csv
[Wed Aug 29 12:43:52 2012] fullrun_mos1_xmm0611180401_pi300-10000_cl_pass0_src33_1.ximg exists
[Wed Aug 29 12:43:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180401_pi300-10000_cl_pass0_src33.csv
[Wed Aug 29 12:43:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180401_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180401_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 29 12:43:53 2012] fullrun_mos1_xmm0611180401_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Wed Aug 29 12:43:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180401_pi300-10000_cl_pass0_tfrozen_src33.csv
[Wed Aug 29 12:43:53 2012] fullrun_mos1_xmm0611180401_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Wed Aug 29 12:43:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180401_pi300-10000_cl_pass0_tfrozen_src33.csv
[Wed Aug 29 12:43:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180401_pi300-10000_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180401_pi300-10000_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 29 16:58:54 2012] Spatial fit model total counts = 3424.730000, observed total counts = 2382.000000
[Wed Aug 29 16:58:54 2012] Poor agreement between spatial fit and data for source 43
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Aug 29 16:58:54 2012] Vigneting correction estimate = 1.000000
[Wed Aug 29 16:58:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 29 16:58:54 2012] Assessing source extent using major
[Wed Aug 29 16:58:54 2012] Source does appear to be extended
[Wed Aug 29 16:58:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 29 16:58:54 2012] Source is confused with source 51
[Wed Aug 29 16:59:18 2012] Using EEF radius (= 10.63 ")to estimate initial spatial extent for simple fitting
[Wed Aug 29 16:59:18 2012] Initial guess for spatial extent in simple fitting = 10.63"
[Wed Aug 29 16:59:18 2012] source mask rpix=2.4, npix_max = 34, mask sum = 30, frac = 0.865
[Wed Aug 29 16:59:18 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 10.63"
[Wed Aug 29 18:53:15 2012] fullrun_mos1_xmm0611180401_pi300-10000_cl_pass1_src28.ximg exists
[Wed Aug 29 18:53:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180401_pi300-10000_cl_pass1_src28.csv
[Wed Aug 29 18:53:15 2012] fullrun_mos1_xmm0611180401_pi300-10000_cl_pass1_src28_1.ximg exists
[Wed Aug 29 18:53:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180401_pi300-10000_cl_pass1_src28.csv
[Wed Aug 29 18:53:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180401_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180401_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 29 18:53:16 2012] fullrun_mos1_xmm0611180401_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Wed Aug 29 18:53:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180401_pi300-10000_cl_pass1_tfrozen_src28.csv
[Wed Aug 29 18:53:16 2012] fullrun_mos1_xmm0611180401_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Wed Aug 29 18:53:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180401_pi300-10000_cl_pass1_tfrozen_src28.csv
[Wed Aug 29 18:53:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180401_pi300-10000_cl_pass1_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180401_pi300-10000_cl_pass1_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug 29 23:22:06 2012] Warning, spatial fit 28 centroid is now closest to src. 50
[Wed Aug 29 23:22:06 2012] Spatial fit model total counts = 2709.870000, observed total counts = 2816.000000
[Wed Aug 29 23:22:06 2012] Offset between fit and detection position for source 43 = 2.850767 pixels
[Wed Aug 29 23:22:06 2012] Warning, changing simple spatial fit ID from 28 to 35
[Wed Aug 29 23:22:06 2012] 2403.201000 total counts/ 890.411000 bgd. counts: snr = 50.697131
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 2.850767 pixels
  Position = (232.0, 205.9) = 5 34 48.38 21 55 33.0
  Extent = 21.3 (21.3-21.3)", rotation angle = 0
  Source counts = 1512.8 +/- 49.0
  Background counts = 890.4
  Rate = 0.2 +/- 0.006
[Wed Aug 29 23:22:06 2012] Vigneting correction estimate = 1.000000
[Wed Aug 29 23:22:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug 29 23:22:06 2012] Assessing source extent using major axis lower bound
[Wed Aug 29 23:22:06 2012] Source does appear to be extended
[Wed Aug 29 23:22:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug 29 23:22:32 2012] Counts = 1512.790000, rescaling region sizes by 2.000000
[Wed Aug 29 23:22:32 2012] XMMSAS src. selection expression = ellipse(20136.443000, 17860.632000, 2552.592073, 2552.592073, 0.000000, X, Y)
[Wed Aug 29 23:22:32 2012] Writing source region out to fullrun_mos1_xmm0611180401_pi300-10000_pass1_cl_src43_src.reg
[Wed Aug 29 23:22:32 2012] Extracting stamp from image fullrun_mos1_xmm0611180401_pi300-10000_cl_sm2.00.img.gz, (85, 59) - (379, 353)
[Wed Aug 29 23:22:32 2012] XMMSAS bgd. selection expression = annulus(20136.443000, 17860.632000, 8508.640245, 17017.280490, X, Y) && !ellipse(31501.606079, 28281.958252, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17916.141098, 23285.073639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17902.557968, 20964.681580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31228.833679, 20130.682449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24019.788000, 18080.276000, 1631.552047, 1631.552047, 0.000000, X, Y) && !ellipse(24417.113800, 17333.326000, 3264.816094, 3264.816094, 0.000000, X, Y) && !ellipse(24262.453600, 10637.514000, 3667.808106, 3667.808106, 0.000000, X, Y) && !ellipse(24315.726000, 9308.678000, 2177.272063, 2177.272063, 0.000000, X, Y) && !ellipse(31348.108215, 29405.938354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17460.782400, 30200.440000, 1641.528047, 1641.528047, 0.000000, X, Y) && !ellipse(17612.097763, 29863.808777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18129.539078, 28918.007690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31855.532104, 28764.082367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17768.141800, 28306.822601, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32007.633423, 27777.364624, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17762.822449, 27265.331604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31578.705475, 27187.932190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31576.775269, 26646.428345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17910.835022, 26575.645264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31663.000000, 26137.594635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32328.976929, 25955.241913, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17658.822296, 25710.429626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17178.680161, 25525.780304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31492.183380, 25533.113495, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17696.332550, 25271.468323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32748.609619, 24592.508301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31492.711731, 24581.718262, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17829.998672, 24132.232422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31768.964874, 23796.849121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17240.483932, 22893.987823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17432.244751, 22478.098724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31494.649902, 22563.686249, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31402.138062, 21786.811401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17828.314056, 21886.599350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31954.017761, 21438.346771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31715.197876, 20757.224228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32184.981415, 20663.087509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21243.924000, 17906.448200, 1658.016048, 820.576024, 89.644000, X, Y) && !ellipse(23435.181030, 17630.724121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22909.442749, 17698.781815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25803.355652, 17486.186981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23559.423126, 17183.037064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22179.982742, 17657.042099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21213.556000, 16825.148000, 1167.392034, 1167.392034, 0.000000, X, Y) && !ellipse(20313.648000, 16977.284000, 2334.784067, 291.848008, 92.350000, X, Y) && !ellipse(22666.868600, 17034.412200, 610.548818, 610.548818, 0.000000, X, Y) && !ellipse(24392.776600, 16760.672000, 1699.976049, 1699.976049, 0.000000, X, Y) && !ellipse(23484.280487, 16565.429459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24324.021118, 15970.957779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24307.655518, 15178.824478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23893.372711, 14740.014511, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24598.333200, 14531.918000, 1774.952051, 1774.952051, 0.000000, X, Y) && !ellipse(24205.362549, 14129.090942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23870.165100, 12649.306381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23835.457720, 12324.896000, 1138.224033, 1138.224033, 0.000000, X, Y) && !ellipse(24484.461884, 9784.340599, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23969.359650, 9693.350090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24548.636597, 8739.232788, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug 29 23:22:32 2012] Writing fullrun_mos1_xmm0611180401_pi300-10000_pass1_cl_src43.gif
[Wed Aug 29 23:39:05 2012] Mean detx,y = (7756.66, 3748.53) 
[Wed Aug 29 23:39:06 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug 29 23:42:17 2012] grppha failed
[Wed Aug 29 23:42:17 2012] Setting source spectrum file to fullrun_mos1_xmm0611180401_pi300-10000_pass1_cl_src43_src.pi.gz
[Wed Aug 29 23:42:17 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0611180401_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Thu Aug 30 00:10:39 2012] Updating aperture counts using extracted products
[Thu Aug 30 00:10:39 2012] Error reading totcts from fullrun_mos1_xmm0611180401_pi300-10000_pass1_cl_src43_src.pi.gz
[Thu Aug 30 00:10:40 2012] No arf file for this source, not re-computing flux
[Thu Aug 30 00:10:41 2012] Flag p found in src. 43 procflags, skipping spectral fitting
[Thu Aug 30 00:10:41 2012] Flag c found in src. 43 procflags, skipping spectral fitting
[Thu Aug 30 00:10:41 2012] Source 43 has no response, skipping
[Thu Aug 30 00:10:42 2012] xmm0611180401/analysis//spectral/fullrun_mos1_xmm0611180401_pi300-10000_pass1_cl_src43_pl.csv not found, spectral fit skipped or did not complete