[Sat Mar 17 09:07:10 2012] Detection parameters:
  Position = (324.4, 478.9) = 5 34 28.45 22 12 35.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 252.7 +/- 23.0
  Background counts = 38.6
  Rate = 0.06 +/- 0.005

[Sat Mar 17 09:07:11 2012] Off-axis axis estimate = 13.22'
[Sat Mar 17 14:46:25 2012] Using EEF radius (= 13.04 ")to estimate initial spatial extent for simple fitting
[Sat Mar 17 14:46:25 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Mar 17 14:46:25 2012] Initial guess for spatial extent in simple fitting = 13.04"
[Sat Mar 17 14:46:25 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.002
[Sat Mar 17 14:46:25 2012] Giving source the simple spatial ID 19 for pass 0, mean size = 13.04"
[Sat Mar 17 19:47:43 2012] fullrun_mos2_xmm0611180201_pi300-10000_cl_pass0_src19.ximg exists
[Sat Mar 17 19:47:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180201_pi300-10000_cl_pass0_src19.csv
[Sat Mar 17 19:47:43 2012] fullrun_mos2_xmm0611180201_pi300-10000_cl_pass0_src19_1.ximg exists
[Sat Mar 17 19:47:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180201_pi300-10000_cl_pass0_src19.csv
[Sat Mar 17 19:47:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180201_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180201_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 17 19:47:46 2012] fullrun_mos2_xmm0611180201_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Sat Mar 17 19:47:46 2012] fullrun_mos2_xmm0611180201_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Sat Mar 17 19:47:46 2012] Fit fullrun_mos2_xmm0611180201_pi300-10000_cl_pass0_tfrozen_src19 appears to have run properly
[Sat Mar 17 19:48:28 2012] Warning, spatial fit 19 centroid is now closest to src. 4
[Sat Mar 17 19:48:28 2012] Warning: source 28 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 13.221488 pixels away
[Sat Mar 17 19:48:28 2012] Vigneting correction estimate = 1.000000
[Sat Mar 17 19:48:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 17 19:48:28 2012] Assessing source extent using major
[Sat Mar 17 19:48:28 2012] Source does appear to be extended
[Sat Mar 17 19:48:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 17 19:48:28 2012] Source is confused with source 4
[Sat Mar 17 19:48:28 2012] Source is confused with source 9
[Sat Mar 17 19:48:28 2012] Source is confused with source 3
[Sat Mar 17 19:48:28 2012] Source is confused with source 29
[Sun Mar 18 01:09:40 2012] Using EEF radius (= 13.04 ")to estimate initial spatial extent for simple fitting
[Sun Mar 18 01:09:40 2012] Initial guess for spatial extent in simple fitting = 13.04"
[Sun Mar 18 01:09:40 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.002
[Sun Mar 18 01:09:40 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 13.04"
[Sun Mar 18 07:32:50 2012] fullrun_mos2_xmm0611180201_pi300-10000_cl_pass1_src18.ximg exists
[Sun Mar 18 07:32:51 2012] fullrun_mos2_xmm0611180201_pi300-10000_cl_pass1_src18_1.ximg exists
[Sun Mar 18 07:32:51 2012] Fit fullrun_mos2_xmm0611180201_pi300-10000_cl_pass1_src18 appears to have run properly
[Sun Mar 18 07:32:52 2012] fullrun_mos2_xmm0611180201_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Sun Mar 18 07:32:52 2012] fullrun_mos2_xmm0611180201_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Sun Mar 18 07:32:52 2012] Fit fullrun_mos2_xmm0611180201_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Sun Mar 18 07:33:31 2012] Warning, spatial fit 18 centroid is now closest to src. 15
[Sun Mar 18 07:33:31 2012] Source 2 is offset by -5.192655 and 3.102743 pixels which is larger than
2 X fitted extent = 1.492547 x 1.492547, not incorporating fit results
[Sun Mar 18 07:33:31 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 07:33:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 07:33:31 2012] Assessing source extent using major
[Sun Mar 18 07:33:31 2012] Source does appear to be extended
[Sun Mar 18 07:33:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 18 09:27:25 2012] XMMSAS src. selection expression = ellipse(28174.241058, 41612.496613, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Mar 18 09:27:25 2012] Writing source region out to fullrun_mos2_xmm0611180201_pi300-10000_pass1_cl_src2_src.reg
[Sun Mar 18 09:27:25 2012] Extracting stamp from image fullrun_mos2_xmm0611180201_pi300-10000_cl_sm2.00.img.gz, (287, 441) - (362, 516)
[Sun Mar 18 09:27:25 2012] XMMSAS bgd. selection expression = annulus(28174.241058, 41612.496613, 1087.500000, 2175.000000, X, Y) && !ellipse(28129.270172, 38748.758118, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28259.271027, 40499.205658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28200.701400, 38134.577600, 1367.328039, 1367.328039, 0.000000, X, Y) && !ellipse(28276.852631, 39625.934662, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28097.620200, 41237.042000, 2649.200076, 2649.200076, 0.000000, X, Y) && !ellipse(28047.915000, 42418.906000, 2191.008063, 2191.008063, 0.000000, X, Y) && !ellipse(28158.125400, 42178.204000, 2149.592062, 2149.592062, 0.000000, X, Y) && !ellipse(27355.920800, 39358.710000, 1404.944040, 1404.944040, 0.000000, X, Y) && !ellipse(27463.903200, 39822.476000, 2809.888081, 732.618421, 95.729900, X, Y) && !ellipse(28395.577576, 40049.499451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28262.640259, 43193.340881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27655.915619, 41554.816101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27408.509369, 38843.802856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27608.356079, 40572.420746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27691.479736, 42054.099670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28121.100000, 44172.382000, 4299.184124, 4299.184124, 0.000000, X, Y)
[Sun Mar 18 09:27:25 2012] Writing fullrun_mos2_xmm0611180201_pi300-10000_pass1_cl_src2.gif
[Sun Mar 18 09:34:11 2012] Mean detx,y = (-210.82, 14145.10) 
[Sun Mar 18 09:34:12 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar 18 09:34:24 2012] Binned source spectrum to 10 counts/bin
[Sun Mar 18 09:34:24 2012] Setting source spectrum file to fullrun_mos2_xmm0611180201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Mar 18 09:34:24 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0611180201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Mar 18 10:29:54 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Mar 18 10:29:54 2012] rmf not generated due to insufficient counts
[Sun Mar 18 12:03:00 2012] Updating aperture counts using extracted products
[Sun Mar 18 12:03:00 2012] Error reading totcts from fullrun_mos2_xmm0611180201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Mar 18 12:03:03 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar 18 12:03:03 2012] Using photon index=1.80, rate=0.058, arf fullrun_mos2_xmm0611180201_pi300-10000_pass1_cl_src2.arf
[Sun Mar 18 12:03:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar 18 12:03:03 2012] Updating source flux to 2e-12
[Sun Mar 18 12:09:38 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting