[Thu Feb 23 09:58:59 2012] Detection parameters:
  Position = (326.2, 233.2) = 5 34 27.93 21 54 59.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 227.1 +/- 23.6
  Background counts = 389.1
  Rate = 0.04 +/- 0.004

[Thu Feb 23 09:59:00 2012] Off-axis axis estimate = 5.14'
[Thu Feb 23 22:40:57 2012] Using EEF radius (= 9.00 ")to estimate initial spatial extent for simple fitting
[Thu Feb 23 22:40:57 2012] Initial guess for spatial extent in simple fitting = 9.00"
[Thu Feb 23 22:40:57 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.947
[Thu Feb 23 22:40:57 2012] Giving source the simple spatial ID 48 for pass 0, mean size = 9.00"
[Fri Feb 24 09:35:55 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_src48.ximg exists
[Fri Feb 24 09:35:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_src48.csv
[Fri Feb 24 09:35:56 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_src48_1.ximg exists
[Fri Feb 24 09:35:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_src48.csv
[Fri Feb 24 09:35:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 09:35:59 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_tfrozen_src48.ximg exists
[Fri Feb 24 09:35:59 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_tfrozen_src48_1.ximg exists
[Fri Feb 24 09:35:59 2012] Fit fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_tfrozen_src48 appears to have run properly
[Fri Feb 24 09:37:14 2012] Warning, spatial fit 48 centroid is now closest to src. 95
[Fri Feb 24 09:37:14 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 09:37:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 09:37:14 2012] Assessing source extent using major
[Fri Feb 24 09:37:14 2012] Source does appear to be extended
[Fri Feb 24 09:37:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 09:37:15 2012] Source is confused with source 103
[Sat Feb 25 05:51:24 2012] Using EEF radius (= 9.00 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 05:51:24 2012] Initial guess for spatial extent in simple fitting = 9.00"
[Sat Feb 25 05:51:24 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.947
[Sat Feb 25 05:51:24 2012] Giving source the simple spatial ID 43 for pass 1, mean size = 9.00"
[Sat Feb 25 22:23:51 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass1_src43.ximg exists
[Sat Feb 25 22:23:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180101_pi300-10000_cl_pass1_src43.csv
[Sat Feb 25 22:23:51 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass1_src43_1.ximg exists
[Sat Feb 25 22:23:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180101_pi300-10000_cl_pass1_src43.csv
[Sat Feb 25 22:23:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180101_pi300-10000_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180101_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 22:23:53 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Sat Feb 25 22:23:53 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Sat Feb 25 22:23:53 2012] Fit fullrun_mos2_xmm0611180101_pi300-10000_cl_pass1_tfrozen_src43 appears to have run properly
[Sat Feb 25 22:25:13 2012] Warning: source 43 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 94 at 12.379596 pixels away
[Sat Feb 25 22:25:13 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 22:25:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 22:25:13 2012] Assessing source extent using major
[Sat Feb 25 22:25:13 2012] Source does appear to be extended
[Sat Feb 25 22:25:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 04:52:20 2012] XMMSAS src. selection expression = ellipse(28328.931030, 20242.257401, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Feb 26 04:52:20 2012] Writing source region out to fullrun_mos2_xmm0611180101_pi300-10000_pass1_cl_src94_src.reg
[Sun Feb 26 04:52:20 2012] Extracting stamp from image fullrun_mos2_xmm0611180101_pi300-10000_cl_sm2.00.img.gz, (289, 196) - (364, 271)
[Sun Feb 26 04:52:20 2012] XMMSAS bgd. selection expression = annulus(28328.931030, 20242.257401, 1087.500000, 2175.000000, X, Y) && !ellipse(29483.520966, 19953.334457, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26593.590607, 20303.960281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27346.188000, 19419.634000, 848.592024, 848.592024, 0.000000, X, Y) && !ellipse(27121.526000, 20020.519200, 395.873611, 395.873611, 0.000000, X, Y) && !ellipse(28870.692000, 19170.590200, 1346.488039, 1346.488039, 0.000000, X, Y) && !ellipse(27923.306274, 19961.543808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27083.528000, 18529.552000, 523.480815, 523.480815, 0.000000, X, Y) && !ellipse(29095.384000, 20204.328800, 1491.792043, 1491.792043, 0.000000, X, Y) && !ellipse(26417.084800, 19702.842000, 567.504816, 567.504816, 0.000000, X, Y) && !ellipse(25708.969360, 20359.450394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28075.252000, 20257.070000, 1447.464042, 1447.464042, 0.000000, X, Y)
[Sun Feb 26 04:52:20 2012] Writing fullrun_mos2_xmm0611180101_pi300-10000_pass1_cl_src94.gif
[Sun Feb 26 05:56:38 2012] Mean detx,y = (-1508.01, -7248.29) 
[Sun Feb 26 05:56:39 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 26 05:56:46 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 26 05:56:47 2012] Setting source spectrum file to fullrun_mos2_xmm0611180101_pi300-10000_pass1_cl_src94_src_b10.pi.gz
[Sun Feb 26 05:56:47 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0611180101_pi300-10000_pass1_cl_src94_bgd.pi.gz
[Sun Feb 26 09:13:10 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Feb 26 09:13:10 2012] rmf not generated due to insufficient counts
[Sun Feb 26 11:31:49 2012] Updating aperture counts using extracted products
[Sun Feb 26 11:31:49 2012] Error reading totcts from fullrun_mos2_xmm0611180101_pi300-10000_pass1_cl_src94_src_b10.pi.gz
[Sun Feb 26 11:31:55 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 26 11:31:55 2012] Using photon index=1.80, rate=0.0423, arf fullrun_mos2_xmm0611180101_pi300-10000_pass1_cl_src94.arf
[Sun Feb 26 11:31:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 26 11:31:55 2012] Updating source flux to 6.8e-13
[Sun Feb 26 11:42:17 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting