[Thu Feb 23 09:58:50 2012] Detection parameters:
  Position = (314.5, 395.3) = 5 34 31.58 22 6 33.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 793.8 +/- 37.2
  Background counts = 278.6
  Rate = 0.1 +/- 0.006

[Thu Feb 23 09:59:00 2012] Off-axis axis estimate = 7.12'
[Thu Feb 23 22:40:57 2012] Using EEF radius (= 9.99 ")to estimate initial spatial extent for simple fitting
[Thu Feb 23 22:40:57 2012] Initial guess for spatial extent in simple fitting = 9.99"
[Thu Feb 23 22:40:57 2012] source mask rpix=2.3, npix_max = 31, mask sum = 20, frac = 0.640
[Thu Feb 23 22:40:57 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 9.99"
[Fri Feb 24 09:35:54 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_src3.ximg exists
[Fri Feb 24 09:35:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_src3.csv
[Fri Feb 24 09:35:54 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Feb 24 09:35:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_src3.csv
[Fri Feb 24 09:35:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 09:35:57 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Feb 24 09:35:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Feb 24 09:35:58 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Feb 24 09:35:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_tfrozen_src3.csv
[Fri Feb 24 09:35:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 09:37:13 2012] Spatial fit model total counts = 3269.130000, observed total counts = 3679.000000
[Fri Feb 24 09:37:13 2012] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Feb 24 09:37:14 2012] Spatial fit model total counts = 4541.930000, observed total counts = 4542.000000
[Fri Feb 24 09:37:14 2012] Offset between fit and detection position for source 9 = 1.598416 pixels
[Fri Feb 24 09:37:14 2012] Warning, changing simple spatial fit ID from 3 to 27
[Fri Feb 24 09:37:14 2012] 3977.592100 total counts/ 3896.950000 bgd. counts: snr = 1.291812
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 1.598416 pixels
  Position = (314.3, 396.9) = 5 34 31.63 22 6 39.8
  Extent = 4.0 (2.6-6.0)", rotation angle = 0
  Source counts = 80.6 +/- 63.1
  Background counts = 3896.9
  Rate = 0.008 +/- 0.006
  Deleting source due to low Poisson probability