[Thu Feb 23 09:58:56 2012] Detection parameters:
  Position = (406.5, 353.4) = 5 34 2.77 22 3 24.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 172.0 +/- 22.9
  Background counts = 173.2
  Rate = 0.03 +/- 0.005

[Thu Feb 23 09:59:00 2012] Off-axis axis estimate = 8.79'
[Thu Feb 23 22:40:57 2012] Using EEF radius (= 10.82 ")to estimate initial spatial extent for simple fitting
[Thu Feb 23 22:40:57 2012] Initial guess for spatial extent in simple fitting = 10.82"
[Thu Feb 23 22:40:57 2012] source mask rpix=2.5, npix_max = 35, mask sum = 28, frac = 0.784
[Thu Feb 23 22:40:57 2012] Giving source the simple spatial ID 58 for pass 0, mean size = 10.82"
[Fri Feb 24 09:35:56 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_src58.ximg exists
[Fri Feb 24 09:35:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_src58.csv
[Fri Feb 24 09:35:56 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_src58_1.ximg exists
[Fri Feb 24 09:35:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_src58.csv
[Fri Feb 24 09:35:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_src58_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 09:35:59 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_tfrozen_src58.ximg exists
[Fri Feb 24 09:35:59 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_tfrozen_src58_1.ximg exists
[Fri Feb 24 09:35:59 2012] Fit fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_tfrozen_src58 appears to have run properly
[Fri Feb 24 09:37:14 2012] Source 61 is offset by 1.741692 and -0.823082 pixels which is larger than
2 X fitted extent = 1.224432 x 1.224432, not incorporating fit results
[Fri Feb 24 09:37:14 2012] Warning: source 58 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 61 at 10.437387 pixels away
[Fri Feb 24 09:37:14 2012] Source 61 is offset by -6.185964 and -1.341634 pixels which is larger than
2 X fitted extent = 1.215389 x 1.215389, not incorporating fit results
[Fri Feb 24 09:37:14 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 09:37:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 09:37:14 2012] Assessing source extent using major
[Fri Feb 24 09:37:14 2012] Source does appear to be extended
[Fri Feb 24 09:37:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 09:37:15 2012] Source is confused with source 63
[Sat Feb 25 05:51:24 2012] Using EEF radius (= 10.82 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 05:51:24 2012] Initial guess for spatial extent in simple fitting = 10.82"
[Sat Feb 25 05:51:24 2012] source mask rpix=2.5, npix_max = 35, mask sum = 28, frac = 0.784
[Sat Feb 25 05:51:24 2012] Giving source the simple spatial ID 53 for pass 1, mean size = 10.82"
[Sat Feb 25 22:23:51 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass1_src53.ximg exists
[Sat Feb 25 22:23:51 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass1_src53_1.ximg exists
[Sat Feb 25 22:23:51 2012] Fit fullrun_mos2_xmm0611180101_pi300-10000_cl_pass1_src53 appears to have run properly
[Sat Feb 25 22:23:54 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass1_tfrozen_src53.ximg exists
[Sat Feb 25 22:23:54 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists
[Sat Feb 25 22:23:54 2012] Fit fullrun_mos2_xmm0611180101_pi300-10000_cl_pass1_tfrozen_src53 appears to have run properly
[Sat Feb 25 22:25:13 2012] Source 61 is offset by 1.741692 and -0.823082 pixels which is larger than
2 X fitted extent = 1.224432 x 1.224432, not incorporating fit results
[Sat Feb 25 22:25:13 2012] Source 61 is offset by 0.915899 and 4.760228 pixels which is larger than
2 X fitted extent = 1.577655 x 1.577655, not incorporating fit results
[Sat Feb 25 22:25:13 2012] Warning, spatial fit 53 centroid is now closest to src. 66
[Sat Feb 25 22:25:13 2012] Source 61 is offset by -6.185964 and -1.341634 pixels which is larger than
2 X fitted extent = 1.215389 x 1.215389, not incorporating fit results
[Sat Feb 25 22:25:13 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 22:25:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 22:25:13 2012] Assessing source extent using major
[Sat Feb 25 22:25:13 2012] Source does appear to be extended
[Sat Feb 25 22:25:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 04:52:22 2012] XMMSAS src. selection expression = ellipse(35320.231171, 30695.687866, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Feb 26 04:52:22 2012] Writing source region out to fullrun_mos2_xmm0611180101_pi300-10000_pass1_cl_src61_src.reg
[Sun Feb 26 04:52:22 2012] Extracting stamp from image fullrun_mos2_xmm0611180101_pi300-10000_cl_sm2.00.img.gz, (369, 316) - (444, 391)
[Sun Feb 26 04:52:22 2012] XMMSAS bgd. selection expression = annulus(35320.231171, 30695.687866, 1087.500000, 2175.000000, X, Y) && !ellipse(34330.653961, 31568.427856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34175.231940, 27967.206000, 1028.392030, 1028.392030, 0.000000, X, Y) && !ellipse(34176.128601, 29100.259521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34484.522000, 31234.486000, 967.176028, 967.176028, 0.000000, X, Y) && !ellipse(34252.528000, 28156.840000, 3219.904093, 3219.904093, 0.000000, X, Y) && !ellipse(34620.976105, 32019.798767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34785.253387, 30403.857666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34961.334200, 31332.122400, 781.318422, 781.318422, 0.000000, X, Y) && !ellipse(35502.822000, 29259.442000, 1609.952046, 1609.952046, 0.000000, X, Y) && !ellipse(35681.768000, 29883.552000, 1731.096050, 1731.096050, 0.000000, X, Y)
[Sun Feb 26 04:52:22 2012] Writing fullrun_mos2_xmm0611180101_pi300-10000_pass1_cl_src61.gif
[Sun Feb 26 06:19:20 2012] Mean detx,y = (-7903.80, 3639.51) 
[Sun Feb 26 06:19:22 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 26 06:19:35 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 26 06:19:35 2012] Setting source spectrum file to fullrun_mos2_xmm0611180101_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Sun Feb 26 06:19:35 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0611180101_pi300-10000_pass1_cl_src61_bgd.pi.gz
[Sun Feb 26 09:42:37 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Feb 26 09:42:37 2012] rmf not generated due to insufficient counts
[Sun Feb 26 11:31:50 2012] Updating aperture counts using extracted products
[Sun Feb 26 11:31:50 2012] Error reading totcts from fullrun_mos2_xmm0611180101_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Sun Feb 26 11:31:56 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 26 11:31:56 2012] Using photon index=1.80, rate=0.0339, arf fullrun_mos2_xmm0611180101_pi300-10000_pass1_cl_src61.arf
[Sun Feb 26 11:31:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 26 11:31:56 2012] Updating source flux to 7.2e-13
[Sun Feb 26 11:42:17 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting