[Thu Feb 23 09:58:54 2012] Detection parameters:
  Position = (349.0, 394.1) = 5 34 20.77 22 6 30.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 173.2 +/- 24.7
  Background counts = 230.5
  Rate = 0.03 +/- 0.004

[Thu Feb 23 09:59:00 2012] Off-axis axis estimate = 7.84'
[Thu Feb 23 22:40:57 2012] Using EEF radius (= 10.35 ")to estimate initial spatial extent for simple fitting
[Thu Feb 23 22:40:57 2012] Initial guess for spatial extent in simple fitting = 10.35"
[Thu Feb 23 22:40:57 2012] source mask rpix=2.4, npix_max = 33, mask sum = 34, frac = 1.025
[Thu Feb 23 22:40:57 2012] Giving source the simple spatial ID 64 for pass 0, mean size = 10.35"
[Fri Feb 24 09:35:57 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_src64.ximg exists
[Fri Feb 24 09:35:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_src64.csv
[Fri Feb 24 09:35:57 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_src64_1.ximg exists
[Fri Feb 24 09:35:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_src64.csv
[Fri Feb 24 09:35:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_src64_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 09:36:00 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_tfrozen_src64.ximg exists
[Fri Feb 24 09:36:00 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_tfrozen_src64_1.ximg exists
[Fri Feb 24 09:36:00 2012] Fit fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_tfrozen_src64 appears to have run properly
[Fri Feb 24 09:37:14 2012] Warning, spatial fit 64 centroid is now closest to src. 37
[Fri Feb 24 09:37:14 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 09:37:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 09:37:14 2012] Assessing source extent using major
[Fri Feb 24 09:37:14 2012] Source does appear to be extended
[Fri Feb 24 09:37:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 09:37:15 2012] Source is confused with source 39
[Sat Feb 25 05:51:24 2012] Using EEF radius (= 10.35 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 05:51:24 2012] Initial guess for spatial extent in simple fitting = 10.35"
[Sat Feb 25 05:51:24 2012] source mask rpix=2.4, npix_max = 33, mask sum = 34, frac = 1.025
[Sat Feb 25 05:51:24 2012] Giving source the simple spatial ID 59 for pass 1, mean size = 10.35"
[Sat Feb 25 22:23:51 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass1_src59.ximg exists
[Sat Feb 25 22:23:51 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass1_src59_1.ximg exists
[Sat Feb 25 22:23:51 2012] Fit fullrun_mos2_xmm0611180101_pi300-10000_cl_pass1_src59 appears to have run properly
[Sat Feb 25 22:23:54 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Sat Feb 25 22:23:54 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Sat Feb 25 22:23:54 2012] Fit fullrun_mos2_xmm0611180101_pi300-10000_cl_pass1_tfrozen_src59 appears to have run properly
[Sat Feb 25 22:25:12 2012] Spatial fit model total counts = 4884.620000, observed total counts = 5999.000000
[Sat Feb 25 22:25:12 2012] Poor agreement between spatial fit and data for source 51
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Feb 25 22:25:13 2012] Spatial fit model total counts = 2366.170000, observed total counts = 2435.000000
[Sat Feb 25 22:25:13 2012] Offset between fit and detection position for source 51 = 2.044340 pixels
[Sat Feb 25 22:25:13 2012] 2505.470000 total counts/ 1823.380000 bgd. counts: snr = 15.973610
Spatial fit parameters:
  Offset between fit and detection position for source 51 = 2.044340 pixels
  Position = (351.0, 393.5) = 5 34 20.16 22 6 25.0
  Extent = 18.8" x 8.5", rotation angle = 0
  Source counts = 682.1 +/- 50.1
  Background counts = 1823.4
  Rate = 0.07 +/- 0.005
[Sat Feb 25 22:25:13 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 22:25:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 22:25:13 2012] Assessing source extent using major
[Sat Feb 25 22:25:13 2012] Source does appear to be extended
[Sat Feb 25 22:25:13 2012] Computing asymmetry using major and minor axis, asym = 2.21
[Sat Feb 25 22:25:13 2012] Source is asymmetric
[Sun Feb 26 04:52:22 2012] XMMSAS src. selection expression = ellipse(30486.306200, 34186.280400, 1129.338032, 510.883215, 0.000000, X, Y)
[Sun Feb 26 04:52:22 2012] Writing source region out to fullrun_mos2_xmm0611180101_pi300-10000_pass1_cl_src51_src.reg
[Sun Feb 26 04:52:22 2012] Extracting stamp from image fullrun_mos2_xmm0611180101_pi300-10000_cl_sm2.00.img.gz, (286, 329) - (416, 458)
[Sun Feb 26 04:52:23 2012] XMMSAS bgd. selection expression = annulus(30486.306200, 34186.280400, 1882.230054, 3764.460108, X, Y) && !ellipse(28174.030000, 34425.295400, 1614.488046, 1614.488046, 0.000000, X, Y) && !ellipse(27837.615204, 35964.691742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29461.260000, 34160.712000, 726.385621, 726.385621, 0.000000, X, Y) && !ellipse(27451.858032, 37378.635559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26123.044000, 34325.797600, 1594.944046, 1594.944046, 0.000000, X, Y) && !ellipse(30017.980000, 34167.288000, 1591.168046, 1591.168046, 0.000000, X, Y) && !ellipse(27921.864594, 36468.101227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31129.596000, 34218.183800, 1697.016049, 1697.016049, 0.000000, X, Y) && !ellipse(28098.327600, 37366.295600, 2938.016085, 763.356822, 90.000000, X, Y) && !ellipse(28016.400000, 37880.602000, 451.900013, 451.900013, 0.000000, X, Y) && !ellipse(31520.411652, 34229.327423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27350.005798, 35097.378632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26942.016000, 36239.928000, 1715.512049, 1715.512049, 0.000000, X, Y) && !ellipse(34330.653961, 31568.427856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27311.540400, 35827.276800, 1073.944031, 398.288011, 90.000000, X, Y) && !ellipse(28113.907600, 38121.284000, 1118.936032, 1118.936032, 0.000000, X, Y) && !ellipse(28842.424316, 34382.267731, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27435.250824, 36889.459686, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29087.218018, 34852.505280, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34484.522000, 31234.486000, 967.176028, 967.176028, 0.000000, X, Y) && !ellipse(34252.528000, 28156.840000, 3219.904093, 3219.904093, 0.000000, X, Y) && !ellipse(27399.997345, 35460.780457, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27280.151200, 38186.408400, 838.816024, 838.816024, 0.000000, X, Y) && !ellipse(34620.976105, 32019.798767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34785.253387, 30403.857666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29001.869446, 35787.001251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34961.334200, 31332.122400, 781.318422, 781.318422, 0.000000, X, Y) && !ellipse(35502.822000, 29259.442000, 1609.952046, 1609.952046, 0.000000, X, Y) && !ellipse(32136.402344, 34190.301147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29091.890869, 37564.402649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35681.768000, 29883.552000, 1731.096050, 1731.096050, 0.000000, X, Y) && !ellipse(30763.075165, 35545.510406, 1740.000000, 1740.000000, 0.000000, X, Y)
[Sun Feb 26 04:52:23 2012] Writing fullrun_mos2_xmm0611180101_pi300-10000_pass1_cl_src51.gif
[Sun Feb 26 06:24:49 2012] Mean detx,y = (-2899.54, 6958.18) 
[Sun Feb 26 06:24:51 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 26 06:25:24 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 26 06:25:25 2012] Setting source spectrum file to fullrun_mos2_xmm0611180101_pi300-10000_pass1_cl_src51_src_b10.pi.gz
[Sun Feb 26 06:25:25 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0611180101_pi300-10000_pass1_cl_src51_bgd.pi.gz
[Sun Feb 26 11:31:50 2012] Updating aperture counts using extracted products
[Sun Feb 26 11:31:50 2012] Error reading totcts from fullrun_mos2_xmm0611180101_pi300-10000_pass1_cl_src51_src_b10.pi.gz
[Sun Feb 26 11:31:56 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 26 11:31:56 2012] Using photon index=1.80, rate=0.0692, arf fullrun_mos2_xmm0611180101_pi300-10000_pass1_cl_src51.arf
[Sun Feb 26 11:31:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 26 11:31:56 2012] Updating source flux to 1.6e-12
[Sun Feb 26 11:42:17 2012] Flag p found in src. 51 procflags, skipping spectral fitting
[Sun Feb 26 11:42:17 2012] Flag c found in src. 51 procflags, skipping spectral fitting