[Thu Feb 23 09:58:54 2012] Detection parameters:
  Position = (369.9, 393.5) = 5 34 14.22 22 6 25.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 115.3 +/- 23.0
  Background counts = 214.8
  Rate = 0.02 +/- 0.004

[Thu Feb 23 09:59:00 2012] Off-axis axis estimate = 8.63'
[Thu Feb 23 22:40:57 2012] Using EEF radius (= 10.74 ")to estimate initial spatial extent for simple fitting
[Thu Feb 23 22:40:57 2012] Initial guess for spatial extent in simple fitting = 10.74"
[Thu Feb 23 22:40:57 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.021
[Thu Feb 23 22:40:57 2012] Giving source the simple spatial ID 86 for pass 0, mean size = 10.74"
[Fri Feb 24 09:35:57 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_src86.ximg exists
[Fri Feb 24 09:35:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_src86.csv
[Fri Feb 24 09:35:57 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_src86_1.ximg exists
[Fri Feb 24 09:35:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_src86.csv
[Fri Feb 24 09:35:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_src86_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_src86.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 09:36:01 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_tfrozen_src86.ximg exists
[Fri Feb 24 09:36:01 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_tfrozen_src86_1.ximg exists
[Fri Feb 24 09:36:01 2012] Fit fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_tfrozen_src86 appears to have run properly
[Fri Feb 24 09:37:14 2012] Warning: source 86 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 48 at 14.331984 pixels away
[Fri Feb 24 09:37:15 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 09:37:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 09:37:15 2012] Assessing source extent using major
[Fri Feb 24 09:37:15 2012] Source does appear to be extended
[Fri Feb 24 09:37:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 09:37:15 2012] Source is confused with source 50
[Sat Feb 25 05:51:24 2012] Using EEF radius (= 10.74 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 05:51:24 2012] Initial guess for spatial extent in simple fitting = 10.74"
[Sat Feb 25 05:51:24 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.021
[Sat Feb 25 05:51:24 2012] Giving source the simple spatial ID 78 for pass 1, mean size = 10.74"
[Sat Feb 25 22:23:52 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass1_src78.ximg exists
[Sat Feb 25 22:23:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180101_pi300-10000_cl_pass1_src78.csv
[Sat Feb 25 22:23:52 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass1_src78_1.ximg exists
[Sat Feb 25 22:23:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180101_pi300-10000_cl_pass1_src78.csv
[Sat Feb 25 22:23:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180101_pi300-10000_cl_pass1_src78_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180101_pi300-10000_cl_pass1_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 22:23:55 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass1_tfrozen_src78.ximg exists
[Sat Feb 25 22:23:55 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass1_tfrozen_src78_1.ximg exists
[Sat Feb 25 22:23:55 2012] Fit fullrun_mos2_xmm0611180101_pi300-10000_cl_pass1_tfrozen_src78 appears to have run properly
[Sat Feb 25 22:25:13 2012] Warning: source 78 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 48 at 14.331984 pixels away
[Sat Feb 25 22:25:13 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 22:25:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 22:25:13 2012] Assessing source extent using major
[Sat Feb 25 22:25:13 2012] Source does appear to be extended
[Sat Feb 25 22:25:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 04:52:25 2012] XMMSAS src. selection expression = ellipse(32136.402344, 34190.301147, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Feb 26 04:52:25 2012] Writing source region out to fullrun_mos2_xmm0611180101_pi300-10000_pass1_cl_src48_src.reg
[Sun Feb 26 04:52:25 2012] Extracting stamp from image fullrun_mos2_xmm0611180101_pi300-10000_cl_sm2.00.img.gz, (332, 356) - (407, 431)
[Sun Feb 26 04:52:25 2012] XMMSAS bgd. selection expression = annulus(32136.402344, 34190.301147, 1087.500000, 2175.000000, X, Y) && !ellipse(29461.260000, 34160.712000, 726.385621, 726.385621, 0.000000, X, Y) && !ellipse(30017.980000, 34167.288000, 1591.168046, 1591.168046, 0.000000, X, Y) && !ellipse(31129.596000, 34218.183800, 1697.016049, 1697.016049, 0.000000, X, Y) && !ellipse(28098.327600, 37366.295600, 2938.016085, 763.356822, 90.000000, X, Y) && !ellipse(31520.411652, 34229.327423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34330.653961, 31568.427856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34484.522000, 31234.486000, 967.176028, 967.176028, 0.000000, X, Y) && !ellipse(30486.306200, 34186.280400, 1505.784043, 681.177620, 0.000000, X, Y) && !ellipse(34620.976105, 32019.798767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34961.334200, 31332.122400, 781.318422, 781.318422, 0.000000, X, Y) && !ellipse(30763.075165, 35545.510406, 1740.000000, 1740.000000, 0.000000, X, Y)
[Sun Feb 26 04:52:25 2012] Writing fullrun_mos2_xmm0611180101_pi300-10000_pass1_cl_src48.gif
[Sun Feb 26 07:02:39 2012] Mean detx,y = (-4545.44, 7063.45) 
[Sun Feb 26 07:02:42 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 26 07:03:06 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 26 07:03:06 2012] Setting source spectrum file to fullrun_mos2_xmm0611180101_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Sun Feb 26 07:03:06 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0611180101_pi300-10000_pass1_cl_src48_bgd.pi.gz
[Sun Feb 26 10:53:29 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Feb 26 10:53:29 2012] rmf not generated due to insufficient counts
[Sun Feb 26 11:31:51 2012] Updating aperture counts using extracted products
[Sun Feb 26 11:31:51 2012] Error reading totcts from fullrun_mos2_xmm0611180101_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Sun Feb 26 11:31:58 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 26 11:31:58 2012] Using photon index=1.80, rate=0.0211, arf fullrun_mos2_xmm0611180101_pi300-10000_pass1_cl_src48.arf
[Sun Feb 26 11:31:58 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 26 11:31:58 2012] Updating source flux to 4.3e-13
[Sun Feb 26 11:42:17 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting