[Thu Feb 23 09:58:53 2012] Detection parameters:
  Position = (332.1, 395.8) = 5 34 26.07 22 6 34.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 263.5 +/- 28.7
  Background counts = 255.6
  Rate = 0.04 +/- 0.005

[Thu Feb 23 09:59:00 2012] Off-axis axis estimate = 7.47'
[Thu Feb 23 22:40:57 2012] Using EEF radius (= 10.16 ")to estimate initial spatial extent for simple fitting
[Thu Feb 23 22:40:57 2012] Initial guess for spatial extent in simple fitting = 10.16"
[Thu Feb 23 22:40:57 2012] source mask rpix=2.3, npix_max = 32, mask sum = 32, frac = 0.995
[Thu Feb 23 22:40:57 2012] Giving source the simple spatial ID 43 for pass 0, mean size = 10.16"
[Fri Feb 24 09:35:55 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_src43.ximg exists
[Fri Feb 24 09:35:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_src43.csv
[Fri Feb 24 09:35:55 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_src43_1.ximg exists
[Fri Feb 24 09:35:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_src43.csv
[Fri Feb 24 09:35:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 09:35:59 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Fri Feb 24 09:35:59 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Fri Feb 24 09:35:59 2012] Fit fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_tfrozen_src43 appears to have run properly
[Fri Feb 24 09:37:13 2012] Source 40 is offset by 2.573061 and 0.262480 pixels which is larger than
2 X fitted extent = 1.188317 x 1.188317, not incorporating fit results
[Fri Feb 24 09:37:14 2012] Warning, spatial fit 43 centroid is now closest to src. 39
[Fri Feb 24 09:37:14 2012] Source 40 is offset by 6.624302 and 3.300664 pixels which is larger than
2 X fitted extent = 1.193090 x 1.193090, not incorporating fit results
[Fri Feb 24 09:37:14 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 09:37:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 09:37:14 2012] Assessing source extent using major
[Fri Feb 24 09:37:14 2012] Source does appear to be extended
[Fri Feb 24 09:37:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 09:37:15 2012] Source is confused with source 10
[Sat Feb 25 05:51:24 2012] Using EEF radius (= 10.16 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 05:51:24 2012] Initial guess for spatial extent in simple fitting = 10.16"
[Sat Feb 25 05:51:24 2012] source mask rpix=2.3, npix_max = 32, mask sum = 32, frac = 0.995
[Sat Feb 25 05:51:24 2012] Giving source the simple spatial ID 39 for pass 1, mean size = 10.16"
[Sat Feb 25 22:23:51 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass1_src39.ximg exists
[Sat Feb 25 22:23:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180101_pi300-10000_cl_pass1_src39.csv
[Sat Feb 25 22:23:51 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass1_src39_1.ximg exists
[Sat Feb 25 22:23:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180101_pi300-10000_cl_pass1_src39.csv
[Sat Feb 25 22:23:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180101_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180101_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 22:23:53 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Sat Feb 25 22:23:53 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Sat Feb 25 22:23:53 2012] Fit fullrun_mos2_xmm0611180101_pi300-10000_cl_pass1_tfrozen_src39 appears to have run properly
[Sat Feb 25 22:25:13 2012] Warning, spatial fit 39 centroid is now closest to src. 38
[Sat Feb 25 22:25:13 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 22:25:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 22:25:13 2012] Assessing source extent using major
[Sat Feb 25 22:25:13 2012] Source does appear to be extended
[Sat Feb 25 22:25:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 04:52:20 2012] XMMSAS src. selection expression = ellipse(28842.424316, 34382.267731, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Feb 26 04:52:20 2012] Writing source region out to fullrun_mos2_xmm0611180101_pi300-10000_pass1_cl_src40_src.reg
[Sun Feb 26 04:52:20 2012] Extracting stamp from image fullrun_mos2_xmm0611180101_pi300-10000_cl_sm2.00.img.gz, (295, 358) - (370, 433)
[Sun Feb 26 04:52:20 2012] XMMSAS bgd. selection expression = annulus(28842.424316, 34382.267731, 1087.500000, 2175.000000, X, Y) && !ellipse(28174.030000, 34425.295400, 1614.488046, 1614.488046, 0.000000, X, Y) && !ellipse(27837.615204, 35964.691742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29461.260000, 34160.712000, 726.385621, 726.385621, 0.000000, X, Y) && !ellipse(27451.858032, 37378.635559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26123.044000, 34325.797600, 1594.944046, 1594.944046, 0.000000, X, Y) && !ellipse(30017.980000, 34167.288000, 1591.168046, 1591.168046, 0.000000, X, Y) && !ellipse(27921.864594, 36468.101227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31129.596000, 34218.183800, 1697.016049, 1697.016049, 0.000000, X, Y) && !ellipse(28098.327600, 37366.295600, 2938.016085, 763.356822, 90.000000, X, Y) && !ellipse(31520.411652, 34229.327423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27350.005798, 35097.378632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26942.016000, 36239.928000, 1715.512049, 1715.512049, 0.000000, X, Y) && !ellipse(27311.540400, 35827.276800, 1073.944031, 398.288011, 90.000000, X, Y) && !ellipse(27435.250824, 36889.459686, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29087.218018, 34852.505280, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27399.997345, 35460.780457, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30486.306200, 34186.280400, 1505.784043, 681.177620, 0.000000, X, Y) && !ellipse(29001.869446, 35787.001251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30763.075165, 35545.510406, 1740.000000, 1740.000000, 0.000000, X, Y)
[Sun Feb 26 04:52:20 2012] Writing fullrun_mos2_xmm0611180101_pi300-10000_pass1_cl_src40.gif
[Sun Feb 26 05:54:18 2012] Mean detx,y = (-1235.29, 7080.78) 
[Sun Feb 26 05:54:20 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 26 05:54:39 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 26 05:54:40 2012] Setting source spectrum file to fullrun_mos2_xmm0611180101_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Sun Feb 26 05:54:40 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0611180101_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Sun Feb 26 09:02:13 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Feb 26 09:02:13 2012] rmf not generated due to insufficient counts
[Sun Feb 26 11:31:49 2012] Updating aperture counts using extracted products
[Sun Feb 26 11:31:49 2012] Error reading totcts from fullrun_mos2_xmm0611180101_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Sun Feb 26 11:31:55 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 26 11:31:55 2012] Using photon index=1.80, rate=0.0444, arf fullrun_mos2_xmm0611180101_pi300-10000_pass1_cl_src40.arf
[Sun Feb 26 11:31:55 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 26 11:31:55 2012] Updating source flux to 8.5e-13
[Sun Feb 26 11:42:17 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting