[Thu Feb 23 09:58:49 2012] Detection parameters:
  Position = (324.0, 472.0) = 5 34 28.58 22 12 6.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 574.5 +/- 45.4
  Background counts = 74.6
  Rate = 0.06 +/- 0.005

[Thu Feb 23 09:59:00 2012] Off-axis axis estimate = 12.72'
[Thu Feb 23 22:40:57 2012] Using EEF radius (= 12.79 ")to estimate initial spatial extent for simple fitting
[Thu Feb 23 22:40:57 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Feb 23 22:40:57 2012] Initial guess for spatial extent in simple fitting = 12.79"
[Thu Feb 23 22:40:57 2012] source mask rpix=2.9, npix_max = 47, mask sum = 35, frac = 0.739
[Thu Feb 23 22:40:57 2012] Giving source the simple spatial ID 22 for pass 0, mean size = 12.79"
[Fri Feb 24 09:35:55 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_src22.ximg exists
[Fri Feb 24 09:35:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_src22.csv
[Fri Feb 24 09:35:55 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_src22_1.ximg exists
[Fri Feb 24 09:35:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_src22.csv
[Fri Feb 24 09:35:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 09:35:58 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Fri Feb 24 09:35:58 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Fri Feb 24 09:35:58 2012] Fit fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_tfrozen_src22 appears to have run properly
[Fri Feb 24 09:37:14 2012] Warning, spatial fit 22 centroid is now closest to src. 17
[Fri Feb 24 09:37:14 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 09:37:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 09:37:14 2012] Assessing source extent using major
[Fri Feb 24 09:37:14 2012] Source does appear to be extended
[Fri Feb 24 09:37:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 09:37:15 2012] Source is confused with source 5
[Fri Feb 24 09:37:15 2012] Source is confused with source 7
[Sat Feb 25 05:51:24 2012] Using EEF radius (= 12.79 ")to estimate initial spatial extent for simple fitting
[Sat Feb 25 05:51:24 2012] Initial guess for spatial extent in simple fitting = 12.79"
[Sat Feb 25 05:51:24 2012] source mask rpix=2.9, npix_max = 47, mask sum = 35, frac = 0.739
[Sat Feb 25 05:51:24 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 12.79"
[Sat Feb 25 22:23:50 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass1_src19.ximg exists
[Sat Feb 25 22:23:50 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0611180101_pi300-10000_cl_pass1_src19.csv
[Sat Feb 25 22:23:50 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass1_src19_1.ximg exists
[Sat Feb 25 22:23:50 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0611180101_pi300-10000_cl_pass1_src19.csv
[Sat Feb 25 22:23:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180101_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180101_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 22:23:53 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Sat Feb 25 22:23:53 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Sat Feb 25 22:23:53 2012] Fit fullrun_mos2_xmm0611180101_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Sat Feb 25 22:25:12 2012] Warning, spatial fit 19 centroid is now closest to src. 17
[Sat Feb 25 22:25:13 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 22:25:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 22:25:13 2012] Assessing source extent using major
[Sat Feb 25 22:25:13 2012] Source does appear to be extended
[Sat Feb 25 22:25:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 04:52:19 2012] XMMSAS src. selection expression = ellipse(28143.705566, 41018.996674, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Feb 26 04:52:19 2012] Writing source region out to fullrun_mos2_xmm0611180101_pi300-10000_pass1_cl_src2_src.reg
[Sun Feb 26 04:52:19 2012] Extracting stamp from image fullrun_mos2_xmm0611180101_pi300-10000_cl_sm2.00.img.gz, (287, 435) - (362, 510)
[Sun Feb 26 04:52:19 2012] XMMSAS bgd. selection expression = annulus(28143.705566, 41018.996674, 1087.500000, 2175.000000, X, Y) && !ellipse(28098.327600, 37366.295600, 2938.016085, 763.356822, 90.000000, X, Y) && !ellipse(28285.707400, 40047.707200, 1188.984034, 1188.984034, 0.000000, X, Y) && !ellipse(28375.022339, 41529.322510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28240.574310, 40576.206818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28113.907600, 38121.284000, 1118.936032, 1118.936032, 0.000000, X, Y) && !ellipse(28628.173600, 42513.750000, 1581.328046, 1581.328046, 0.000000, X, Y) && !ellipse(28238.968018, 43273.578522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28195.300600, 42131.772000, 2144.944062, 2144.944062, 0.000000, X, Y) && !ellipse(27508.797200, 40641.428800, 567.344016, 567.344016, 0.000000, X, Y) && !ellipse(27280.151200, 38186.408400, 838.816024, 838.816024, 0.000000, X, Y) && !ellipse(28401.044281, 43979.325134, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27604.179600, 42228.949800, 746.580021, 746.580021, 0.000000, X, Y) && !ellipse(27605.488647, 41710.483124, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27410.556396, 39101.967285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27681.055400, 43874.972600, 779.896822, 779.896822, 0.000000, X, Y) && !ellipse(29116.776459, 39003.484283, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Feb 26 04:52:19 2012] Writing fullrun_mos2_xmm0611180101_pi300-10000_pass1_cl_src2.gif
[Sun Feb 26 05:42:02 2012] Mean detx,y = (-206.95, 13565.47) 
[Sun Feb 26 05:42:04 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 26 05:42:31 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 26 05:42:31 2012] Setting source spectrum file to fullrun_mos2_xmm0611180101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Feb 26 05:42:31 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0611180101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sun Feb 26 08:15:13 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Feb 26 08:15:13 2012] rmf not generated due to insufficient counts
[Sun Feb 26 11:31:48 2012] Updating aperture counts using extracted products
[Sun Feb 26 11:31:48 2012] Error reading totcts from fullrun_mos2_xmm0611180101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sun Feb 26 11:31:54 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 26 11:31:54 2012] Using photon index=1.80, rate=0.0583, arf fullrun_mos2_xmm0611180101_pi300-10000_pass1_cl_src2.arf
[Sun Feb 26 11:31:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 26 11:31:54 2012] Updating source flux to 2e-12
[Sun Feb 26 11:42:17 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting