[Thu Feb 23 09:58:59 2012] Detection parameters:
  Position = (331.8, 233.1) = 5 34 26.16 21 54 58.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 216.9 +/- 23.2
  Background counts = 385.9
  Rate = 0.04 +/- 0.004

[Thu Feb 23 09:59:00 2012] Off-axis axis estimate = 5.32'
[Thu Feb 23 22:40:57 2012] Using EEF radius (= 9.09 ")to estimate initial spatial extent for simple fitting
[Thu Feb 23 22:40:57 2012] Initial guess for spatial extent in simple fitting = 9.09"
[Thu Feb 23 22:40:57 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.932
[Thu Feb 23 22:40:57 2012] Giving source the simple spatial ID 50 for pass 0, mean size = 9.09"
[Fri Feb 24 09:35:56 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_src50.ximg exists
[Fri Feb 24 09:35:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_src50.csv
[Fri Feb 24 09:35:56 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_src50_1.ximg exists
[Fri Feb 24 09:35:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_src50.csv
[Fri Feb 24 09:35:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 09:35:59 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_tfrozen_src50.ximg exists
[Fri Feb 24 09:35:59 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists
[Fri Feb 24 09:35:59 2012] Fit fullrun_mos2_xmm0611180101_pi300-10000_cl_pass0_tfrozen_src50 appears to have run properly
[Fri Feb 24 09:37:13 2012] Spatial fit model total counts = 3698.470000, observed total counts = 3775.000000
[Fri Feb 24 09:37:13 2012] Offset between fit and detection position for source 102 = 3.861160 pixels
[Fri Feb 24 09:37:13 2012] Warning, changing simple spatial fit ID from 50 to 4
[Fri Feb 24 09:37:13 2012] 3403.600000 total counts/ 1406.390000 bgd. counts: snr = 53.256282
Spatial fit parameters:
  Offset between fit and detection position for source 102 = 3.861160 pixels
  Position = (335.7, 232.8) = 5 34 24.96 21 54 45.8
  Extent = 18.6" x 13.1", rotation angle = 1
  Source counts = 1997.2 +/- 58.3
  Background counts = 1406.4
  Rate = 0.2 +/- 0.006
[Fri Feb 24 09:37:14 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 09:37:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 09:37:14 2012] Assessing source extent using major
[Fri Feb 24 09:37:14 2012] Source does appear to be extended
[Fri Feb 24 09:37:14 2012] Computing asymmetry using major and minor axis, asym = 1.42
[Fri Feb 24 09:37:15 2012] Source is confused with source 101
[Sat Feb 25 05:51:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 25 05:51:24 2012] Initial guess for spatial extent in simple fitting = 15.88"
[Sat Feb 25 05:51:24 2012] source mask rpix=3.7, npix_max = 68, mask sum = 56, frac = 0.812
[Sat Feb 25 05:51:24 2012] Giving source the simple spatial ID 45 for pass 1, mean size = 15.88"
[Sat Feb 25 22:23:51 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass1_src45.ximg exists
[Sat Feb 25 22:23:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180101_pi300-10000_cl_pass1_src45.csv
[Sat Feb 25 22:23:51 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass1_src45_1.ximg exists
[Sat Feb 25 22:23:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0611180101_pi300-10000_cl_pass1_src45.csv
[Sat Feb 25 22:23:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0611180101_pi300-10000_cl_pass1_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0611180101_pi300-10000_cl_pass1_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 22:23:53 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass1_tfrozen_src45.ximg exists
[Sat Feb 25 22:23:53 2012] fullrun_mos2_xmm0611180101_pi300-10000_cl_pass1_tfrozen_src45_1.ximg exists
[Sat Feb 25 22:23:54 2012] Fit fullrun_mos2_xmm0611180101_pi300-10000_cl_pass1_tfrozen_src45 appears to have run properly
[Sat Feb 25 22:25:12 2012] Spatial fit model total counts = 3762.690000, observed total counts = 3775.000000
[Sat Feb 25 22:25:12 2012] Offset between fit and detection position for source 102 = 0.673628 pixels
[Sat Feb 25 22:25:12 2012] Warning, changing simple spatial fit ID from 45 to 3
[Sat Feb 25 22:25:12 2012] 3419.898000 total counts/ 795.448000 bgd. counts: snr = 93.053434
Spatial fit parameters:
  Offset between fit and detection position for source 102 = 0.673628 pixels
  Position = (335.0, 232.8) = 5 34 25.17 21 54 45.9
  Extent = 18.6 (18.6-37.3)", rotation angle = 0
  Source counts = 2624.4 +/- 58.5
  Background counts = 795.4
  Rate = 0.3 +/- 0.006
[Sat Feb 25 22:25:13 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 22:25:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 22:25:13 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 22:25:13 2012] Source does appear to be extended
[Sat Feb 25 22:25:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Feb 26 04:52:21 2012] Counts = 2624.450000, rescaling region sizes by 2.000000
[Sun Feb 26 04:52:21 2012] XMMSAS src. selection expression = ellipse(29095.384000, 20204.328800, 2237.688064, 2237.688064, 0.000000, X, Y)
[Sun Feb 26 04:52:21 2012] Writing source region out to fullrun_mos2_xmm0611180101_pi300-10000_pass1_cl_src102_src.reg
[Sun Feb 26 04:52:21 2012] Extracting stamp from image fullrun_mos2_xmm0611180101_pi300-10000_cl_sm2.00.img.gz, (206, 104) - (464, 361)
[Sun Feb 26 04:52:21 2012] XMMSAS bgd. selection expression = annulus(29095.384000, 20204.328800, 7458.960215, 14917.920429, X, Y) && !ellipse(19685.421600, 28167.644000, 1471.944042, 1471.944042, 0.000000, X, Y) && !ellipse(28174.030000, 34425.295400, 1614.488046, 1614.488046, 0.000000, X, Y) && !ellipse(29483.520966, 19953.334457, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27837.615204, 35964.691742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20225.024200, 28906.282800, 1464.064042, 1464.064042, 0.000000, X, Y) && !ellipse(29461.260000, 34160.712000, 726.385621, 726.385621, 0.000000, X, Y) && !ellipse(26593.590607, 20303.960281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26123.044000, 34325.797600, 1594.944046, 1594.944046, 0.000000, X, Y) && !ellipse(30017.980000, 34167.288000, 1591.168046, 1591.168046, 0.000000, X, Y) && !ellipse(31129.596000, 34218.183800, 1697.016049, 1697.016049, 0.000000, X, Y) && !ellipse(27346.188000, 19419.634000, 848.592024, 848.592024, 0.000000, X, Y) && !ellipse(24409.920000, 34450.846200, 1469.008042, 1469.008042, 0.000000, X, Y) && !ellipse(28098.327600, 37366.295600, 2938.016085, 763.356822, 90.000000, X, Y) && !ellipse(33870.247986, 25707.028534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33894.400787, 26224.764557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31520.411652, 34229.327423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20139.053757, 26573.494690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27350.005798, 35097.378632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26942.016000, 36239.928000, 1715.512049, 1715.512049, 0.000000, X, Y) && !ellipse(25117.529724, 34445.985779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34330.653961, 31568.427856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27121.526000, 20020.519200, 395.873611, 395.873611, 0.000000, X, Y) && !ellipse(34175.231940, 27967.206000, 1028.392030, 1028.392030, 0.000000, X, Y) && !ellipse(27311.540400, 35827.276800, 1073.944031, 398.288011, 90.000000, X, Y) && !ellipse(28870.692000, 19170.590200, 1346.488039, 1346.488039, 0.000000, X, Y) && !ellipse(27923.306274, 19961.543808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34176.128601, 29100.259521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27083.528000, 18529.552000, 523.480815, 523.480815, 0.000000, X, Y) && !ellipse(28842.424316, 34382.267731, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34531.164000, 26759.514000, 1631.264047, 1631.264047, 0.000000, X, Y) && !ellipse(23606.140000, 34485.652000, 863.016025, 863.016025, 0.000000, X, Y) && !ellipse(28328.931030, 20242.257401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34055.184052, 25189.735901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20210.043760, 29921.222000, 1490.768043, 1490.768043, 0.000000, X, Y) && !ellipse(29087.218018, 34852.505280, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26417.084800, 19702.842000, 567.504816, 567.504816, 0.000000, X, Y) && !ellipse(34484.522000, 31234.486000, 967.176028, 967.176028, 0.000000, X, Y) && !ellipse(35320.231171, 30695.687866, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34252.528000, 28156.840000, 3219.904093, 3219.904093, 0.000000, X, Y) && !ellipse(27399.997345, 35460.780457, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30486.306200, 34186.280400, 1505.784043, 681.177620, 0.000000, X, Y) && !ellipse(33848.736938, 23014.295166, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20190.146000, 30206.418000, 656.502419, 656.502419, 0.000000, X, Y) && !ellipse(25708.969360, 20359.450394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33985.170929, 24139.995728, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34620.976105, 32019.798767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19956.216492, 30765.878876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34785.253387, 30403.857666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19685.664600, 27631.374000, 2935.952084, 2935.952084, 0.000000, X, Y) && !ellipse(29001.869446, 35787.001251, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19595.592000, 32399.410000, 1596.320046, 1596.320046, 0.000000, X, Y) && !ellipse(34961.334200, 31332.122400, 781.318422, 781.318422, 0.000000, X, Y) && !ellipse(35502.822000, 29259.442000, 1609.952046, 1609.952046, 0.000000, X, Y) && !ellipse(28075.252000, 20257.070000, 1447.464042, 1447.464042, 0.000000, X, Y) && !ellipse(20081.262000, 32163.146000, 3192.640092, 1602.184046, 90.000000, X, Y) && !ellipse(32136.402344, 34190.301147, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20154.637960, 27369.373200, 1369.360039, 1369.360039, 0.000000, X, Y) && !ellipse(35489.369812, 26224.084869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20599.246002, 31824.008942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35681.768000, 29883.552000, 1731.096050, 1731.096050, 0.000000, X, Y) && !ellipse(24378.305847, 20506.726196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33636.485931, 22581.862579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30763.075165, 35545.510406, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(20240.690933, 24812.453583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20423.051620, 28141.047882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20690.706451, 31451.925171, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23633.958000, 20554.228800, 1429.248041, 730.591221, 2.596000, X, Y) && !ellipse(24092.972504, 34486.793579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20223.757156, 25860.152039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26959.432000, 13233.432000, 762.876822, 762.876822, 0.000000, X, Y) && !ellipse(26739.394196, 13879.256668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26691.792175, 12644.222000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26624.442047, 14485.873779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25908.043457, 12385.915527, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Feb 26 04:52:21 2012] Writing fullrun_mos2_xmm0611180101_pi300-10000_pass1_cl_src102.gif
[Sun Feb 26 06:04:35 2012] Mean detx,y = (-2118.66, -7772.70) 
[Sun Feb 26 06:04:39 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Feb 26 06:10:04 2012] Binned source spectrum to 10 counts/bin
[Sun Feb 26 06:10:04 2012] Setting source spectrum file to fullrun_mos2_xmm0611180101_pi300-10000_pass1_cl_src102_src_b10.pi.gz
[Sun Feb 26 06:10:04 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0611180101_pi300-10000_pass1_cl_src102_bgd.pi.gz
[Sun Feb 26 11:31:50 2012] Updating aperture counts using extracted products
[Sun Feb 26 11:31:50 2012] Error reading totcts from fullrun_mos2_xmm0611180101_pi300-10000_pass1_cl_src102_src_b10.pi.gz
[Sun Feb 26 11:31:56 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 26 11:31:56 2012] Using photon index=1.80, rate=0.266, arf fullrun_mos2_xmm0611180101_pi300-10000_pass1_cl_src102.arf
[Sun Feb 26 11:31:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 26 11:31:56 2012] Updating source flux to 3.8e-12
[Sun Feb 26 11:42:17 2012] Flag c found in src. 102 procflags, skipping spectral fitting