[Thu Feb 23 09:58:33 2012] Detection parameters:
  Position = (323.3, 479.1) = 5 34 28.82 22 12 39.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 233.9 +/- 25.2
  Background counts = 94.7
  Rate = 0.02 +/- 0.003

[Thu Feb 23 09:58:48 2012] Off-axis axis estimate = 13.22'
[Thu Feb 23 10:02:32 2012] Using EEF radius (= 13.04 ")to estimate initial spatial extent for simple fitting
[Thu Feb 23 10:02:32 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Feb 23 10:02:32 2012] Initial guess for spatial extent in simple fitting = 13.04"
[Thu Feb 23 10:02:32 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.002
[Thu Feb 23 10:02:32 2012] Giving source the simple spatial ID 38 for pass 0, mean size = 13.04"
[Thu Feb 23 22:40:52 2012] fullrun_mos1_xmm0611180101_pi300-10000_cl_pass0_src38.ximg exists
[Thu Feb 23 22:40:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180101_pi300-10000_cl_pass0_src38.csv
[Thu Feb 23 22:40:52 2012] fullrun_mos1_xmm0611180101_pi300-10000_cl_pass0_src38_1.ximg exists
[Thu Feb 23 22:40:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180101_pi300-10000_cl_pass0_src38.csv
[Thu Feb 23 22:40:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180101_pi300-10000_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180101_pi300-10000_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 22:40:56 2012] fullrun_mos1_xmm0611180101_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Thu Feb 23 22:40:56 2012] fullrun_mos1_xmm0611180101_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Thu Feb 23 22:40:56 2012] Fit fullrun_mos1_xmm0611180101_pi300-10000_cl_pass0_tfrozen_src38 appears to have run properly
[Fri Feb 24 09:36:39 2012] Spatial fit model total counts = 2392.440000, observed total counts = 2388.000000
[Fri Feb 24 09:36:39 2012] Offset between fit and detection position for source 40 = 1.648224 pixels
[Fri Feb 24 09:36:39 2012] Warning, changing simple spatial fit ID from 38 to 18
[Fri Feb 24 09:36:39 2012] 2046.292000 total counts/ 1286.810000 bgd. counts: snr = 21.171921
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 1.648224 pixels
  Position = (322.6, 477.6) = 5 34 29.03 22 12 30.6
  Extent = 25.1 (24.0-25.6)", rotation angle = 0
  Source counts = 759.5 +/- 45.2
  Background counts = 1286.8
  Rate = 0.08 +/- 0.005
[Fri Feb 24 09:36:40 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 09:36:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 09:36:40 2012] Assessing source extent using major axis lower bound
[Fri Feb 24 09:36:40 2012] Source does appear to be extended
[Fri Feb 24 09:36:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 09:36:40 2012] Source is confused with source 20
[Fri Feb 24 09:37:41 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 24 09:37:41 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Feb 24 09:37:41 2012] Initial guess for spatial extent in simple fitting = 25.08"
[Fri Feb 24 09:37:41 2012] source mask rpix=5.8, npix_max = 157, mask sum = 169, frac = 1.076
[Fri Feb 24 09:37:41 2012] Giving source the simple spatial ID 31 for pass 1, mean size = 25.08"
[Sat Feb 25 05:51:19 2012] fullrun_mos1_xmm0611180101_pi300-10000_cl_pass1_src31.ximg exists
[Sat Feb 25 05:51:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180101_pi300-10000_cl_pass1_src31.csv
[Sat Feb 25 05:51:19 2012] fullrun_mos1_xmm0611180101_pi300-10000_cl_pass1_src31_1.ximg exists
[Sat Feb 25 05:51:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180101_pi300-10000_cl_pass1_src31.csv
[Sat Feb 25 05:51:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180101_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180101_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 05:51:22 2012] fullrun_mos1_xmm0611180101_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Sat Feb 25 05:51:22 2012] fullrun_mos1_xmm0611180101_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Sat Feb 25 05:51:22 2012] Fit fullrun_mos1_xmm0611180101_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly
[Sat Feb 25 22:24:41 2012] Warning, spatial fit 31 centroid is now closest to src. 22
[Sat Feb 25 22:24:41 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 22:24:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 22:24:41 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 22:24:41 2012] Source does appear to be extended
[Sat Feb 25 22:24:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 22:25:50 2012] XMMSAS src. selection expression = ellipse(28018.534400, 41498.600000, 1505.016043, 1505.016043, 0.000000, X, Y)
[Sat Feb 25 22:25:50 2012] Writing source region out to fullrun_mos1_xmm0611180101_pi300-10000_pass1_cl_src40_src.reg
[Sat Feb 25 22:25:50 2012] Extracting stamp from image fullrun_mos1_xmm0611180101_pi300-10000_cl_sm2.00.img.gz, (236, 391) - (409, 564)
[Sat Feb 25 22:25:50 2012] XMMSAS bgd. selection expression = annulus(28018.534400, 41498.600000, 2508.360072, 5016.720144, X, Y) && !ellipse(27923.048000, 35157.556000, 1681.696048, 1681.696048, 0.000000, X, Y) && !ellipse(27887.702332, 41098.851990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27711.990000, 40636.836000, 1674.416048, 1674.416048, 0.000000, X, Y) && !ellipse(27902.394000, 39634.114000, 2477.856071, 2477.856071, 0.000000, X, Y) && !ellipse(27859.763940, 36897.366800, 775.094422, 775.094422, 0.000000, X, Y) && !ellipse(28207.630400, 35698.442000, 1715.536049, 1715.536049, 0.000000, X, Y) && !ellipse(27491.479034, 41536.477814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28378.025200, 41276.756000, 2078.952060, 2078.952060, 0.000000, X, Y) && !ellipse(28097.310000, 38641.608000, 2194.544063, 2194.544063, 0.000000, X, Y) && !ellipse(27611.974884, 38321.234680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28236.240200, 38063.188000, 1819.984052, 1819.984052, 0.000000, X, Y) && !ellipse(27791.877014, 37623.747864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27622.472870, 36231.280579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32034.652000, 35005.178000, 1677.376048, 1677.376048, 0.000000, X, Y) && !ellipse(27935.366600, 41819.300000, 2127.848061, 2127.848061, 0.000000, X, Y) && !ellipse(28799.088000, 43710.214000, 2184.608063, 2184.608063, 0.000000, X, Y) && !ellipse(28651.169281, 40556.036560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26903.918000, 39697.190000, 1895.224055, 1895.224055, 0.000000, X, Y) && !ellipse(28557.526398, 39108.344666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27364.666870, 38834.250061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28346.852478, 37534.984924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25922.822000, 35025.512000, 1647.872047, 421.939212, 90.000000, X, Y) && !ellipse(27871.036200, 43969.840000, 4255.696122, 4255.696122, 0.000000, X, Y)
[Sat Feb 25 22:25:50 2012] Writing fullrun_mos1_xmm0611180101_pi300-10000_pass1_cl_src40.gif
[Sat Feb 25 23:47:47 2012] Mean detx,y = (14144.97, -47.49) 
[Sat Feb 25 23:47:49 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Feb 25 23:48:15 2012] Binned source spectrum to 10 counts/bin
[Sat Feb 25 23:48:15 2012] Setting source spectrum file to fullrun_mos1_xmm0611180101_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Sat Feb 25 23:48:15 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0611180101_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Sun Feb 26 11:31:38 2012] Updating aperture counts using extracted products
[Sun Feb 26 11:31:38 2012] Error reading totcts from fullrun_mos1_xmm0611180101_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Sun Feb 26 11:31:44 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 26 11:31:44 2012] Using photon index=1.80, rate=0.0771, arf fullrun_mos1_xmm0611180101_pi300-10000_pass1_cl_src40.arf
[Sun Feb 26 11:31:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 26 11:31:44 2012] Updating source flux to 1.8e-12
[Sun Feb 26 11:32:03 2012] Flag c found in src. 40 procflags, skipping spectral fitting