[Thu Feb 23 09:58:33 2012] Detection parameters:
  Position = (389.5, 265.1) = 5 34 8.13 21 57 4.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 308.9 +/- 30.9
  Background counts = 218.1
  Rate = 0.05 +/- 0.005

[Thu Feb 23 09:58:48 2012] Off-axis axis estimate = 7.03'
[Thu Feb 23 10:02:32 2012] Using EEF radius (= 9.94 ")to estimate initial spatial extent for simple fitting
[Thu Feb 23 10:02:32 2012] Initial guess for spatial extent in simple fitting = 9.94"
[Thu Feb 23 10:02:32 2012] source mask rpix=2.3, npix_max = 31, mask sum = 18, frac = 0.580
[Thu Feb 23 10:02:32 2012] Giving source the simple spatial ID 37 for pass 0, mean size = 9.94"
[Thu Feb 23 22:40:52 2012] fullrun_mos1_xmm0611180101_pi300-10000_cl_pass0_src37.ximg exists
[Thu Feb 23 22:40:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180101_pi300-10000_cl_pass0_src37.csv
[Thu Feb 23 22:40:52 2012] fullrun_mos1_xmm0611180101_pi300-10000_cl_pass0_src37_1.ximg exists
[Thu Feb 23 22:40:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180101_pi300-10000_cl_pass0_src37.csv
[Thu Feb 23 22:40:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180101_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180101_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 22:40:56 2012] fullrun_mos1_xmm0611180101_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Thu Feb 23 22:40:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180101_pi300-10000_cl_pass0_tfrozen_src37.csv
[Thu Feb 23 22:40:56 2012] fullrun_mos1_xmm0611180101_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Thu Feb 23 22:40:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180101_pi300-10000_cl_pass0_tfrozen_src37.csv
[Thu Feb 23 22:40:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180101_pi300-10000_cl_pass0_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180101_pi300-10000_cl_pass0_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Feb 24 09:36:39 2012] Warning, spatial fit 37 centroid is now closest to src. 116
[Fri Feb 24 09:36:40 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 09:36:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 09:36:40 2012] Assessing source extent using major
[Fri Feb 24 09:36:40 2012] Source does appear to be extended
[Fri Feb 24 09:36:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 09:36:40 2012] Source is confused with source 38
[Fri Feb 24 09:37:41 2012] Using EEF radius (= 9.94 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 09:37:41 2012] Initial guess for spatial extent in simple fitting = 9.94"
[Fri Feb 24 09:37:41 2012] source mask rpix=2.3, npix_max = 31, mask sum = 18, frac = 0.580
[Fri Feb 24 09:37:41 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 9.94"
[Sat Feb 25 05:51:19 2012] fullrun_mos1_xmm0611180101_pi300-10000_cl_pass1_src30.ximg exists
[Sat Feb 25 05:51:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180101_pi300-10000_cl_pass1_src30.csv
[Sat Feb 25 05:51:19 2012] fullrun_mos1_xmm0611180101_pi300-10000_cl_pass1_src30_1.ximg exists
[Sat Feb 25 05:51:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180101_pi300-10000_cl_pass1_src30.csv
[Sat Feb 25 05:51:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180101_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180101_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 05:51:22 2012] fullrun_mos1_xmm0611180101_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Sat Feb 25 05:51:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180101_pi300-10000_cl_pass1_tfrozen_src30.csv
[Sat Feb 25 05:51:22 2012] fullrun_mos1_xmm0611180101_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Sat Feb 25 05:51:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180101_pi300-10000_cl_pass1_tfrozen_src30.csv
[Sat Feb 25 05:51:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180101_pi300-10000_cl_pass1_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180101_pi300-10000_cl_pass1_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 22:24:41 2012] Warning, spatial fit 30 centroid is now closest to src. 80
[Sat Feb 25 22:24:41 2012] Source 39 is offset by 6.609425 and -4.819835 pixels which is larger than
2 X fitted extent = 1.138676 x 1.138676, not incorporating fit results
[Sat Feb 25 22:24:41 2012] Spatial fit model total counts = 3217.180000, observed total counts = 3220.000000
[Sat Feb 25 22:24:41 2012] Offset between fit and detection position for source 39 = 1.630198 pixels
[Sat Feb 25 22:24:41 2012] Warning, changing simple spatial fit ID from 30 to 97
[Sat Feb 25 22:24:41 2012] 3180.060000 total counts/ 3045.320000 bgd. counts: snr = 2.441631
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 1.630198 pixels
  Position = (388.7, 266.5) = 5 34 8.38 21 57 12.4
  Extent = 19.8 (18.9-20.2)", rotation angle = 0
  Source counts = 134.7 +/- 56.4
  Background counts = 3045.3
  Rate = 0.01 +/- 0.006
[Sat Feb 25 22:24:41 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 22:24:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 22:24:41 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 22:24:41 2012] Source does appear to be extended
[Sat Feb 25 22:24:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 22:25:50 2012] XMMSAS src. selection expression = ellipse(33768.440000, 23136.252000, 1186.020034, 1186.020034, 0.000000, X, Y)
[Sat Feb 25 22:25:50 2012] Writing source region out to fullrun_mos1_xmm0611180101_pi300-10000_pass1_cl_src39_src.reg
[Sat Feb 25 22:25:50 2012] Extracting stamp from image fullrun_mos1_xmm0611180101_pi300-10000_cl_sm2.00.img.gz, (321, 198) - (457, 335)
[Sat Feb 25 22:25:50 2012] XMMSAS bgd. selection expression = annulus(33768.440000, 23136.252000, 1976.700057, 3953.400114, X, Y) && !ellipse(34266.178400, 27167.690000, 2043.328059, 2043.328059, 0.000000, X, Y) && !ellipse(34104.533081, 27539.779327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35486.621800, 27948.343000, 1683.712048, 543.979216, 90.000000, X, Y) && !ellipse(35218.705505, 27463.901245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34185.981415, 25360.807404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34066.077637, 24573.490326, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34177.966000, 23766.688000, 3213.240092, 3213.240092, 0.000000, X, Y) && !ellipse(35870.500000, 26438.386000, 1493.328043, 1493.328043, 0.000000, X, Y) && !ellipse(34613.330400, 24673.026000, 1614.296046, 1614.296046, 0.000000, X, Y) && !ellipse(34498.212000, 23949.912000, 1642.632047, 835.288024, 90.002000, X, Y) && !ellipse(34070.508881, 24135.455627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34301.486000, 23432.296000, 1653.648048, 1201.656035, 85.980000, X, Y) && !ellipse(34835.359100, 23026.123322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33896.625702, 19519.951370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33943.611755, 20208.586319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34041.709778, 20933.810226, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34501.242249, 22228.353394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34233.286072, 21875.695145, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Feb 25 22:25:50 2012] Writing fullrun_mos1_xmm0611180101_pi300-10000_pass1_cl_src39.gif
[Sat Feb 25 23:47:08 2012] Mean detx,y = (-3717.54, 7040.65) 
[Sat Feb 25 23:47:10 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Feb 25 23:47:37 2012] Binned source spectrum to 10 counts/bin
[Sat Feb 25 23:47:37 2012] Setting source spectrum file to fullrun_mos1_xmm0611180101_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Sat Feb 25 23:47:37 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0611180101_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Sun Feb 26 11:31:38 2012] Updating aperture counts using extracted products
[Sun Feb 26 11:31:38 2012] Error reading totcts from fullrun_mos1_xmm0611180101_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Sun Feb 26 11:31:44 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 26 11:31:44 2012] Using photon index=1.80, rate=0.0137, arf fullrun_mos1_xmm0611180101_pi300-10000_pass1_cl_src39.arf
[Sun Feb 26 11:31:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 26 11:31:44 2012] Updating source flux to 2.9e-13
[Sun Feb 26 11:32:03 2012] Flag b found in src. 39 procflags, skipping spectral fitting
[Sun Feb 26 11:32:03 2012] Flag c found in src. 39 procflags, skipping spectral fitting