[Thu Feb 23 09:58:31 2012] Detection parameters:
  Position = (332.5, 402.0) = 5 34 25.94 22 6 58.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 303.1 +/- 37.4
  Background counts = 273.3
  Rate = 0.05 +/- 0.007

[Thu Feb 23 09:58:48 2012] Off-axis axis estimate = 7.91'
[Thu Feb 23 10:02:32 2012] Using EEF radius (= 10.38 ")to estimate initial spatial extent for simple fitting
[Thu Feb 23 10:02:32 2012] Initial guess for spatial extent in simple fitting = 10.38"
[Thu Feb 23 10:02:32 2012] source mask rpix=2.4, npix_max = 33, mask sum = 18, frac = 0.540
[Thu Feb 23 10:02:32 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 10.38"
[Thu Feb 23 22:40:52 2012] fullrun_mos1_xmm0611180101_pi300-10000_cl_pass0_src23.ximg exists
[Thu Feb 23 22:40:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180101_pi300-10000_cl_pass0_src23.csv
[Thu Feb 23 22:40:52 2012] fullrun_mos1_xmm0611180101_pi300-10000_cl_pass0_src23_1.ximg exists
[Thu Feb 23 22:40:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180101_pi300-10000_cl_pass0_src23.csv
[Thu Feb 23 22:40:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180101_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180101_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 22:40:55 2012] fullrun_mos1_xmm0611180101_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Thu Feb 23 22:40:55 2012] fullrun_mos1_xmm0611180101_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Thu Feb 23 22:40:55 2012] Fit fullrun_mos1_xmm0611180101_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Fri Feb 24 09:36:39 2012] Spatial fit model total counts = 5964.930000, observed total counts = 5960.000000
[Fri Feb 24 09:36:39 2012] Offset between fit and detection position for source 25 = 6.562068 pixels
[Fri Feb 24 09:36:39 2012] Warning, changing simple spatial fit ID from 23 to 12
[Fri Feb 24 09:36:39 2012] 5632.580020 total counts/ 5632.580000 bgd. counts: snr = 0.000000
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 6.562068 pixels
  Position = (332.5, 395.5) = 5 34 25.93 22 6 33.6
  Extent = 20.7 (20.7-41.4)", rotation angle = 0
  Source counts = 0.0 +/- 75.1
  Background counts = 5632.6
  Rate = 2e-09 +/- 0.008
  Deleting source due to low Poisson probability