[Thu Feb 23 09:58:29 2012] Detection parameters:
  Position = (322.2, 452.0) = 5 34 29.15 22 10 39.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 263.2 +/- 27.4
  Background counts = 133.4
  Rate = 0.03 +/- 0.003

[Thu Feb 23 09:58:48 2012] Off-axis axis estimate = 11.27'
[Thu Feb 23 10:02:32 2012] Using EEF radius (= 12.06 ")to estimate initial spatial extent for simple fitting
[Thu Feb 23 10:02:32 2012] Initial guess for spatial extent in simple fitting = 12.06"
[Thu Feb 23 10:02:32 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.980
[Thu Feb 23 10:02:32 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 12.06"
[Thu Feb 23 22:40:52 2012] fullrun_mos1_xmm0611180101_pi300-10000_cl_pass0_src20.ximg exists
[Thu Feb 23 22:40:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180101_pi300-10000_cl_pass0_src20.csv
[Thu Feb 23 22:40:52 2012] fullrun_mos1_xmm0611180101_pi300-10000_cl_pass0_src20_1.ximg exists
[Thu Feb 23 22:40:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180101_pi300-10000_cl_pass0_src20.csv
[Thu Feb 23 22:40:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180101_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180101_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 22:40:55 2012] fullrun_mos1_xmm0611180101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Thu Feb 23 22:40:55 2012] fullrun_mos1_xmm0611180101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Thu Feb 23 22:40:55 2012] Fit fullrun_mos1_xmm0611180101_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Fri Feb 24 09:36:39 2012] Warning, spatial fit 20 centroid is now closest to src. 88
[Fri Feb 24 09:36:40 2012] Source 22 is offset by -2.388837 and 0.845203 pixels which is larger than
2 X fitted extent = 1.391876 x 1.391876, not incorporating fit results
[Fri Feb 24 09:36:40 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 09:36:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 09:36:40 2012] Assessing source extent using major
[Fri Feb 24 09:36:40 2012] Source does appear to be extended
[Fri Feb 24 09:36:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 09:36:40 2012] Source is confused with source 45
[Fri Feb 24 09:36:40 2012] Source is confused with source 89
[Fri Feb 24 09:36:40 2012] Source is confused with source 90
[Fri Feb 24 09:37:41 2012] Using EEF radius (= 12.06 ")to estimate initial spatial extent for simple fitting
[Fri Feb 24 09:37:41 2012] Initial guess for spatial extent in simple fitting = 12.06"
[Fri Feb 24 09:37:41 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.980
[Fri Feb 24 09:37:41 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 12.06"
[Sat Feb 25 05:51:19 2012] fullrun_mos1_xmm0611180101_pi300-10000_cl_pass1_src15.ximg exists
[Sat Feb 25 05:51:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180101_pi300-10000_cl_pass1_src15.csv
[Sat Feb 25 05:51:19 2012] fullrun_mos1_xmm0611180101_pi300-10000_cl_pass1_src15_1.ximg exists
[Sat Feb 25 05:51:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180101_pi300-10000_cl_pass1_src15.csv
[Sat Feb 25 05:51:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180101_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180101_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 05:51:22 2012] fullrun_mos1_xmm0611180101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sat Feb 25 05:51:22 2012] fullrun_mos1_xmm0611180101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sat Feb 25 05:51:22 2012] Fit fullrun_mos1_xmm0611180101_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Sat Feb 25 22:24:40 2012] Warning, spatial fit 15 centroid is now closest to src. 88
[Sat Feb 25 22:24:41 2012] Spatial fit model total counts = 6748.000000, observed total counts = 6748.000000
[Sat Feb 25 22:24:41 2012] Offset between fit and detection position for source 22 = 8.252358 pixels
[Sat Feb 25 22:24:41 2012] Warning, changing simple spatial fit ID from 15 to 31
[Sat Feb 25 22:24:41 2012] 5363.690000 total counts/ 1614.040000 bgd. counts: snr = 93.332647
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 8.252358 pixels
  Position = (320.9, 460.2) = 5 34 29.57 22 11 15.0
  Extent = 50.2 (49.5-100.3)", rotation angle = 0
  Source counts = 3749.7 +/- 73.2
  Background counts = 1614.0
  Rate = 0.4 +/- 0.007
[Sat Feb 25 22:24:41 2012] Spatial fit model total counts = 12252.100000, observed total counts = 12245.000000
[Sat Feb 25 22:24:41 2012] Offset between fit and detection position for source 22 = 4.068064 pixels
[Sat Feb 25 22:24:41 2012] Warning, changing simple spatial fit ID from 31 to 33
[Sat Feb 25 22:24:41 2012] 10158.540000 total counts/ 8481.070000 bgd. counts: snr = 18.215011
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 4.068064 pixels
  Position = (321.3, 456.1) = 5 34 29.45 22 10 57.4
  Extent = 31.0 (28.4-34.6)", rotation angle = 0
  Source counts = 1677.5 +/- 100.8
  Background counts = 8481.1
  Rate = 0.2 +/- 0.01
[Sat Feb 25 22:24:41 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 22:24:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 22:24:41 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 22:24:41 2012] Source does appear to be extended
[Sat Feb 25 22:24:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 22:25:47 2012] Counts = 1677.470000, rescaling region sizes by 2.000000
[Sat Feb 25 22:25:47 2012] XMMSAS src. selection expression = ellipse(27902.394000, 39634.114000, 3716.784107, 3716.784107, 0.000000, X, Y)
[Sat Feb 25 22:25:47 2012] Writing source region out to fullrun_mos1_xmm0611180101_pi300-10000_pass1_cl_src22_src.reg
[Sat Feb 25 22:25:47 2012] Extracting stamp from image fullrun_mos1_xmm0611180101_pi300-10000_cl_sm2.00.img.gz, (108, 243) - (535, 595)
[Sat Feb 25 22:25:48 2012] XMMSAS bgd. selection expression = annulus(27902.394000, 39634.114000, 12389.280356, 24778.560713, X, Y) && !ellipse(20687.781937, 32122.330688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31473.622070, 34049.098724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34266.178400, 27167.690000, 2043.328059, 2043.328059, 0.000000, X, Y) && !ellipse(20352.395981, 23734.761261, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26947.364000, 34182.554600, 1595.752046, 1595.752046, 0.000000, X, Y) && !ellipse(34199.763672, 30147.551758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26394.242120, 34185.742000, 1590.952046, 582.391217, 179.614900, X, Y) && !ellipse(24433.041931, 34841.043518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29121.568600, 34033.281600, 1614.736046, 562.639216, 0.000000, X, Y) && !ellipse(27697.560000, 34622.372000, 1327.144038, 1327.144038, 0.000000, X, Y) && !ellipse(27923.048000, 35157.556000, 1681.696048, 1681.696048, 0.000000, X, Y) && !ellipse(30623.772000, 34748.333800, 1224.432035, 1224.432035, 0.000000, X, Y) && !ellipse(30740.648132, 34094.736023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34152.196167, 28835.667267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34104.533081, 27539.779327, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27887.702332, 41098.851990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27711.990000, 40636.836000, 1674.416048, 1674.416048, 0.000000, X, Y) && !ellipse(27859.763940, 36897.366800, 775.094422, 775.094422, 0.000000, X, Y) && !ellipse(28207.630400, 35698.442000, 1715.536049, 1715.536049, 0.000000, X, Y) && !ellipse(25390.099800, 34287.937400, 1585.624046, 1585.624046, 0.000000, X, Y) && !ellipse(25463.714000, 34364.515000, 1588.120046, 1588.120046, 0.000000, X, Y) && !ellipse(24538.876709, 34380.263184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30329.840000, 34478.824000, 1675.160048, 1675.160048, 0.000000, X, Y) && !ellipse(33406.998000, 34198.612000, 1145.480033, 1145.480033, 0.000000, X, Y) && !ellipse(34375.906281, 30914.934875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34241.729065, 29353.902435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35486.621800, 27948.343000, 1683.712048, 543.979216, 90.000000, X, Y) && !ellipse(35218.705505, 27463.901245, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34185.981415, 25360.807404, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34066.077637, 24573.490326, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34177.966000, 23766.688000, 3213.240092, 3213.240092, 0.000000, X, Y) && !ellipse(33768.440000, 23136.252000, 1581.360046, 1581.360046, 0.000000, X, Y) && !ellipse(28018.534400, 41498.600000, 2006.688058, 2006.688058, 0.000000, X, Y) && !ellipse(27491.479034, 41536.477814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28378.025200, 41276.756000, 2078.952060, 2078.952060, 0.000000, X, Y) && !ellipse(28097.310000, 38641.608000, 2194.544063, 2194.544063, 0.000000, X, Y) && !ellipse(27611.974884, 38321.234680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28236.240200, 38063.188000, 1819.984052, 1819.984052, 0.000000, X, Y) && !ellipse(27791.877014, 37623.747864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27622.472870, 36231.280579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27113.323212, 35344.673370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28766.588715, 35288.325684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33633.506000, 35153.828000, 708.020020, 708.020020, 0.000000, X, Y) && !ellipse(32843.818700, 35234.369600, 522.436015, 522.436015, 0.000000, X, Y) && !ellipse(32034.652000, 35005.178000, 1677.376048, 1677.376048, 0.000000, X, Y) && !ellipse(33141.997345, 34564.562042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31683.777800, 34972.215800, 698.291220, 698.291220, 0.000000, X, Y) && !ellipse(31156.348724, 34708.146027, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22828.408600, 34466.235687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33984.344000, 34194.200000, 977.408028, 977.408028, 0.000000, X, Y) && !ellipse(32386.148000, 34026.936000, 1353.304039, 1353.304039, 0.000000, X, Y) && !ellipse(32670.692474, 34067.115753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34500.384674, 33090.457916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34468.493800, 32669.604000, 1133.072033, 1133.072033, 0.000000, X, Y) && !ellipse(35774.442963, 31863.101593, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20171.967388, 31295.638560, 1520.472044, 1153.450598, 90.000000, X, Y) && !ellipse(35288.376129, 29787.027985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34136.953644, 29708.062103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20428.935165, 29013.031189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35870.500000, 26438.386000, 1493.328043, 1493.328043, 0.000000, X, Y) && !ellipse(20438.910110, 26398.276031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20275.264725, 25367.606934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34613.330400, 24673.026000, 1614.296046, 1614.296046, 0.000000, X, Y) && !ellipse(34498.212000, 23949.912000, 1642.632047, 835.288024, 90.002000, X, Y) && !ellipse(34070.508881, 24135.455627, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34301.486000, 23432.296000, 1653.648048, 1201.656035, 85.980000, X, Y) && !ellipse(34835.359100, 23026.123322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20258.980103, 22471.994812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27935.366600, 41819.300000, 2127.848061, 2127.848061, 0.000000, X, Y) && !ellipse(28799.088000, 43710.214000, 2184.608063, 2184.608063, 0.000000, X, Y) && !ellipse(33896.625702, 19519.951370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28651.169281, 40556.036560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26903.918000, 39697.190000, 1895.224055, 1895.224055, 0.000000, X, Y) && !ellipse(28557.526398, 39108.344666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27364.666870, 38834.250061, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28346.852478, 37534.984924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35047.292920, 37038.754000, 1967.792057, 1967.792057, 0.000000, X, Y) && !ellipse(32053.661011, 35436.335602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33943.611755, 20208.586319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34601.859894, 35440.814636, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23152.531921, 34997.403503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25922.822000, 35025.512000, 1647.872047, 421.939212, 90.000000, X, Y) && !ellipse(34041.709778, 20933.810226, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22083.160461, 34521.428436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35741.475464, 33953.453949, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34750.968994, 33786.423401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35220.502960, 33637.332886, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34983.090240, 32757.044647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20162.304000, 30630.004000, 1520.472044, 1087.712031, 89.732000, X, Y) && !ellipse(19995.885284, 30320.011841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19567.783051, 29278.438538, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35596.597400, 29444.120364, 685.342420, 685.342420, 0.000000, X, Y) && !ellipse(20035.978600, 28213.677600, 1460.264042, 1460.264042, 0.000000, X, Y) && !ellipse(19405.438629, 24129.755280, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34501.242249, 22228.353394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34233.286072, 21875.695145, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27871.036200, 43969.840000, 4255.696122, 4255.696122, 0.000000, X, Y)
[Sat Feb 25 22:25:48 2012] Writing fullrun_mos1_xmm0611180101_pi300-10000_pass1_cl_src22.gif
[Sat Feb 25 23:01:31 2012] Mean detx,y = (11719.19, 64.96) 
[Sat Feb 25 23:01:36 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Feb 25 23:10:45 2012] Binned source spectrum to 10 counts/bin
[Sat Feb 25 23:10:45 2012] Setting source spectrum file to fullrun_mos1_xmm0611180101_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Sat Feb 25 23:10:45 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0611180101_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Sun Feb 26 11:31:37 2012] Updating aperture counts using extracted products
[Sun Feb 26 11:31:37 2012] Error reading totcts from fullrun_mos1_xmm0611180101_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Sun Feb 26 11:31:43 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 26 11:31:43 2012] Using photon index=1.80, rate=0.17, arf fullrun_mos1_xmm0611180101_pi300-10000_pass1_cl_src22.arf
[Sun Feb 26 11:31:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 26 11:31:43 2012] Updating source flux to 3.3e-12
[Sun Feb 26 11:32:03 2012] Flag b found in src. 22 procflags, skipping spectral fitting
[Sun Feb 26 11:32:03 2012] Flag c found in src. 22 procflags, skipping spectral fitting