[Thu Feb 23 09:58:28 2012] Detection parameters:
  Position = (318.2, 399.9) = 5 34 30.42 22 6 54.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 484.6 +/- 39.1
  Background counts = 316.9
  Rate = 0.07 +/- 0.006

[Thu Feb 23 09:58:48 2012] Off-axis axis estimate = 7.49'
[Thu Feb 23 10:02:32 2012] Using EEF radius (= 10.18 ")to estimate initial spatial extent for simple fitting
[Thu Feb 23 10:02:32 2012] Initial guess for spatial extent in simple fitting = 10.18"
[Thu Feb 23 10:02:32 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.116
[Thu Feb 23 10:02:32 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 10.18"
[Thu Feb 23 22:40:51 2012] fullrun_mos1_xmm0611180101_pi300-10000_cl_pass0_src11.ximg exists
[Thu Feb 23 22:40:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180101_pi300-10000_cl_pass0_src11.csv
[Thu Feb 23 22:40:51 2012] fullrun_mos1_xmm0611180101_pi300-10000_cl_pass0_src11_1.ximg exists
[Thu Feb 23 22:40:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180101_pi300-10000_cl_pass0_src11.csv
[Thu Feb 23 22:40:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Feb 23 22:40:55 2012] fullrun_mos1_xmm0611180101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Thu Feb 23 22:40:55 2012] fullrun_mos1_xmm0611180101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Thu Feb 23 22:40:55 2012] Fit fullrun_mos1_xmm0611180101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Fri Feb 24 09:36:39 2012] Warning, spatial fit 11 centroid is now closest to src. 51
[Fri Feb 24 09:36:39 2012] Spatial fit model total counts = 4815.170000, observed total counts = 4812.000000
[Fri Feb 24 09:36:39 2012] Offset between fit and detection position for source 13 = 1.399754 pixels
[Fri Feb 24 09:36:39 2012] Warning, changing simple spatial fit ID from 11 to 48
[Fri Feb 24 09:36:39 2012] 4799.649000 total counts/ 4493.670000 bgd. counts: snr = 4.564477
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 1.399754 pixels
  Position = (319.2, 399.0) = 5 34 30.09 22 6 48.8
  Extent = 20.8 (20.8-20.8)", rotation angle = 0
  Source counts = 306.0 +/- 69.3
  Background counts = 4493.7
  Rate = 0.03 +/- 0.007
[Fri Feb 24 09:36:40 2012] Vigneting correction estimate = 1.000000
[Fri Feb 24 09:36:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Feb 24 09:36:40 2012] Assessing source extent using major axis lower bound
[Fri Feb 24 09:36:40 2012] Source does appear to be extended
[Fri Feb 24 09:36:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Feb 24 09:36:40 2012] Source is confused with source 8
[Fri Feb 24 09:37:41 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Feb 24 09:37:41 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Feb 24 09:37:41 2012] Initial guess for spatial extent in simple fitting = 20.78"
[Fri Feb 24 09:37:41 2012] source mask rpix=4.8, npix_max = 111, mask sum = 110, frac = 0.988
[Fri Feb 24 09:37:41 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 20.78"
[Sat Feb 25 05:51:19 2012] fullrun_mos1_xmm0611180101_pi300-10000_cl_pass1_src7.ximg exists
[Sat Feb 25 05:51:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180101_pi300-10000_cl_pass1_src7.csv
[Sat Feb 25 05:51:19 2012] fullrun_mos1_xmm0611180101_pi300-10000_cl_pass1_src7_1.ximg exists
[Sat Feb 25 05:51:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0611180101_pi300-10000_cl_pass1_src7.csv
[Sat Feb 25 05:51:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0611180101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0611180101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 25 05:51:21 2012] fullrun_mos1_xmm0611180101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sat Feb 25 05:51:21 2012] fullrun_mos1_xmm0611180101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sat Feb 25 05:51:21 2012] Fit fullrun_mos1_xmm0611180101_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Sat Feb 25 22:24:40 2012] Warning, spatial fit 7 centroid is now closest to src. 96
[Sat Feb 25 22:24:40 2012] Spatial fit model total counts = 23829.900000, observed total counts = 23795.000000
[Sat Feb 25 22:24:40 2012] Offset between fit and detection position for source 13 = 1.931147 pixels
[Sat Feb 25 22:24:40 2012] Warning, changing simple spatial fit ID from 7 to 8
[Sat Feb 25 22:24:40 2012] 24253.100000 total counts/ 10172.000000 bgd. counts: snr = 139.615426
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 1.931147 pixels
  Position = (317.5, 399.8) = 5 34 30.64 22 6 52.4
  Extent = 42.0 (42.0-84.1)", rotation angle = 0
  Source counts = 14081.1 +/- 155.7
  Background counts = 10172.0
  Rate = 1 +/- 0.02
[Sat Feb 25 22:24:41 2012] Spatial fit model total counts = 4816.940000, observed total counts = 4812.000000
[Sat Feb 25 22:24:41 2012] Offset between fit and detection position for source 13 = 1.922766 pixels
[Sat Feb 25 22:24:41 2012] Warning, changing simple spatial fit ID from 8 to 40
[Sat Feb 25 22:24:41 2012] 4760.721000 total counts/ 4588.180000 bgd. counts: snr = 2.547253
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 1.922766 pixels
  Position = (318.9, 398.5) = 5 34 30.19 22 6 46.8
  Extent = 16.6 (8.2-20.8)", rotation angle = 0
  Source counts = 172.5 +/- 69.0
  Background counts = 4588.2
  Rate = 0.02 +/- 0.007
[Sat Feb 25 22:24:41 2012] Vigneting correction estimate = 1.000000
[Sat Feb 25 22:24:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 25 22:24:41 2012] Assessing source extent using major axis lower bound
[Sat Feb 25 22:24:41 2012] Source does appear to be extended
[Sat Feb 25 22:24:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 25 22:25:46 2012] XMMSAS src. selection expression = ellipse(27697.560000, 34622.372000, 995.358029, 995.358029, 0.000000, X, Y)
[Sat Feb 25 22:25:46 2012] Writing source region out to fullrun_mos1_xmm0611180101_pi300-10000_pass1_cl_src13_src.reg
[Sat Feb 25 22:25:46 2012] Extracting stamp from image fullrun_mos1_xmm0611180101_pi300-10000_cl_sm2.00.img.gz, (262, 341) - (376, 456)
[Sat Feb 25 22:25:47 2012] XMMSAS bgd. selection expression = annulus(27697.560000, 34622.372000, 1658.930048, 3317.860095, X, Y) && !ellipse(31473.622070, 34049.098724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26947.364000, 34182.554600, 1595.752046, 1595.752046, 0.000000, X, Y) && !ellipse(26394.242120, 34185.742000, 1590.952046, 582.391217, 179.614900, X, Y) && !ellipse(24433.041931, 34841.043518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29121.568600, 34033.281600, 1614.736046, 562.639216, 0.000000, X, Y) && !ellipse(27923.048000, 35157.556000, 1681.696048, 1681.696048, 0.000000, X, Y) && !ellipse(30623.772000, 34748.333800, 1224.432035, 1224.432035, 0.000000, X, Y) && !ellipse(30740.648132, 34094.736023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27902.394000, 39634.114000, 2477.856071, 2477.856071, 0.000000, X, Y) && !ellipse(27859.763940, 36897.366800, 775.094422, 775.094422, 0.000000, X, Y) && !ellipse(28207.630400, 35698.442000, 1715.536049, 1715.536049, 0.000000, X, Y) && !ellipse(25390.099800, 34287.937400, 1585.624046, 1585.624046, 0.000000, X, Y) && !ellipse(25463.714000, 34364.515000, 1588.120046, 1588.120046, 0.000000, X, Y) && !ellipse(24538.876709, 34380.263184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30329.840000, 34478.824000, 1675.160048, 1675.160048, 0.000000, X, Y) && !ellipse(28097.310000, 38641.608000, 2194.544063, 2194.544063, 0.000000, X, Y) && !ellipse(27611.974884, 38321.234680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28236.240200, 38063.188000, 1819.984052, 1819.984052, 0.000000, X, Y) && !ellipse(27791.877014, 37623.747864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27622.472870, 36231.280579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27113.323212, 35344.673370, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28766.588715, 35288.325684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32034.652000, 35005.178000, 1677.376048, 1677.376048, 0.000000, X, Y) && !ellipse(31683.777800, 34972.215800, 698.291220, 698.291220, 0.000000, X, Y) && !ellipse(31156.348724, 34708.146027, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26903.918000, 39697.190000, 1895.224055, 1895.224055, 0.000000, X, Y) && !ellipse(28346.852478, 37534.984924, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25922.822000, 35025.512000, 1647.872047, 421.939212, 90.000000, X, Y)
[Sat Feb 25 22:25:47 2012] Writing fullrun_mos1_xmm0611180101_pi300-10000_pass1_cl_src13.gif
[Sat Feb 25 22:57:10 2012] Mean detx,y = (7396.13, 3.13) 
[Sat Feb 25 22:57:12 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Feb 25 22:57:37 2012] Binned source spectrum to 10 counts/bin
[Sat Feb 25 22:57:38 2012] Setting source spectrum file to fullrun_mos1_xmm0611180101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sat Feb 25 22:57:38 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0611180101_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Sun Feb 26 11:31:37 2012] Updating aperture counts using extracted products
[Sun Feb 26 11:31:37 2012] Error reading totcts from fullrun_mos1_xmm0611180101_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sun Feb 26 11:31:43 2012] Calculating source flux in energy range 0.30-8.00
[Sun Feb 26 11:31:43 2012] Using photon index=1.80, rate=0.0175, arf fullrun_mos1_xmm0611180101_pi300-10000_pass1_cl_src13.arf
[Sun Feb 26 11:31:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Feb 26 11:31:43 2012] Updating source flux to 2.6e-13
[Sun Feb 26 11:32:03 2012] Flag c found in src. 13 procflags, skipping spectral fitting