[Fri Jun 21 20:55:44 2013] Detection parameters:
  Position = (393.0, 339.2) = 16 51 46.67 -45 19 7.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 114.9 +/- 20.2
  Background counts = 122.9
  Rate = 0.004 +/- 0.0007

[Fri Jun 21 20:55:45 2013] Off-axis axis estimate = 7.47'
[Fri Jun 21 22:02:25 2013] Using EEF radius (= 10.16 ")to estimate initial spatial extent for simple fitting
[Fri Jun 21 22:02:25 2013] Initial guess for spatial extent in simple fitting = 10.16"
[Fri Jun 21 22:02:25 2013] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.119
[Fri Jun 21 22:02:25 2013] Giving source the simple spatial ID 50 for pass 0, mean size = 10.16"
[Sat Jun 22 03:01:15 2013] fullrun_mos2_xmm0610000701_pi300-10000_cl_pass0_src50.ximg exists
[Sat Jun 22 03:01:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0610000701_pi300-10000_cl_pass0_src50.csv
[Sat Jun 22 03:01:15 2013] fullrun_mos2_xmm0610000701_pi300-10000_cl_pass0_src50_1.ximg exists
[Sat Jun 22 03:01:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0610000701_pi300-10000_cl_pass0_src50.csv
[Sat Jun 22 03:01:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0610000701_pi300-10000_cl_pass0_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0610000701_pi300-10000_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 03:01:17 2013] fullrun_mos2_xmm0610000701_pi300-10000_cl_pass0_tfrozen_src50.ximg exists
[Sat Jun 22 03:01:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0610000701_pi300-10000_cl_pass0_tfrozen_src50.csv
[Sat Jun 22 03:01:17 2013] fullrun_mos2_xmm0610000701_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists
[Sat Jun 22 03:01:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0610000701_pi300-10000_cl_pass0_tfrozen_src50.csv
[Sat Jun 22 03:01:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0610000701_pi300-10000_cl_pass0_tfrozen_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0610000701_pi300-10000_cl_pass0_tfrozen_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 03:01:45 2013] Warning, spatial fit 50 centroid is now closest to src. 28
[Sat Jun 22 03:01:46 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 03:01:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 03:01:46 2013] Assessing source extent using major
[Sat Jun 22 03:01:46 2013] Source does appear to be extended
[Sat Jun 22 03:01:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 03:01:46 2013] Source is confused with source 28
[Sat Jun 22 04:15:30 2013] Using EEF radius (= 10.16 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 04:15:30 2013] Initial guess for spatial extent in simple fitting = 10.16"
[Sat Jun 22 04:15:30 2013] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.119
[Sat Jun 22 04:15:30 2013] Giving source the simple spatial ID 50 for pass 1, mean size = 10.16"
[Sat Jun 22 10:19:10 2013] fullrun_mos2_xmm0610000701_pi300-10000_cl_pass1_src50.ximg exists
[Sat Jun 22 10:19:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0610000701_pi300-10000_cl_pass1_src50.csv
[Sat Jun 22 10:19:10 2013] fullrun_mos2_xmm0610000701_pi300-10000_cl_pass1_src50_1.ximg exists
[Sat Jun 22 10:19:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0610000701_pi300-10000_cl_pass1_src50.csv
[Sat Jun 22 10:19:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0610000701_pi300-10000_cl_pass1_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0610000701_pi300-10000_cl_pass1_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 10:19:12 2013] fullrun_mos2_xmm0610000701_pi300-10000_cl_pass1_tfrozen_src50.ximg exists
[Sat Jun 22 10:19:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0610000701_pi300-10000_cl_pass1_tfrozen_src50.csv
[Sat Jun 22 10:19:12 2013] fullrun_mos2_xmm0610000701_pi300-10000_cl_pass1_tfrozen_src50_1.ximg exists
[Sat Jun 22 10:19:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0610000701_pi300-10000_cl_pass1_tfrozen_src50.csv
[Sat Jun 22 10:19:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0610000701_pi300-10000_cl_pass1_tfrozen_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0610000701_pi300-10000_cl_pass1_tfrozen_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 10:19:44 2013] Warning, spatial fit 50 centroid is now closest to src. 28
[Sat Jun 22 10:19:45 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 10:19:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 10:19:45 2013] Assessing source extent using major
[Sat Jun 22 10:19:45 2013] Source does appear to be extended
[Sat Jun 22 10:19:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 15:44:17 2013] XMMSAS src. selection expression = ellipse(34143.962921, 29458.635376, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 15:44:17 2013] Writing source region out to fullrun_mos2_xmm0610000701_pi300-10000_pass1_cl_src57_src.reg
[Sat Jun 22 15:44:17 2013] Extracting stamp from image fullrun_mos2_xmm0610000701_pi300-10000_cl_sm2.00.img.gz, (356, 302) - (431, 377)
[Sat Jun 22 15:44:17 2013] XMMSAS bgd. selection expression = annulus(34143.962921, 29458.635376, 1087.500000, 2175.000000, X, Y) && !ellipse(33962.796997, 30505.378021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34334.793152, 31097.938080, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35198.099940, 30753.471480, 1722.624050, 325.057609, 117.909000, X, Y) && !ellipse(35719.518372, 31608.290466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34673.106480, 31698.438800, 1730.272050, 509.710415, 121.592800, X, Y) && !ellipse(36101.678000, 32291.462600, 1835.264053, 229.408007, 122.783000, X, Y) && !ellipse(33849.931702, 29887.329681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34680.196533, 29709.840973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36058.005402, 27700.634277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35926.676000, 27359.094000, 1666.096048, 245.117607, 108.198400, X, Y) && !ellipse(35598.083600, 33110.038000, 1847.648053, 433.826412, 303.406100, X, Y) && !ellipse(35918.674774, 31962.078430, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33850.298096, 26837.372742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34293.446381, 28914.391541, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34426.460693, 27708.394928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34905.506800, 28722.208000, 1003.496029, 1003.496029, 0.000000, X, Y) && !ellipse(34981.085693, 26676.865601, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 22 15:44:17 2013] Writing fullrun_mos2_xmm0610000701_pi300-10000_pass1_cl_src57.gif
[Sat Jun 22 16:06:57 2013] Mean detx,y = (-7120.26, 1938.10) 
[Sat Jun 22 16:06:58 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 16:07:10 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 16:07:10 2013] Setting source spectrum file to fullrun_mos2_xmm0610000701_pi300-10000_pass1_cl_src57_src_b10.pi.gz
[Sat Jun 22 16:07:10 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0610000701_pi300-10000_pass1_cl_src57_bgd.pi.gz
[Sat Jun 22 17:32:04 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 22 17:32:04 2013] rmf not generated due to insufficient counts
[Sat Jun 22 17:59:29 2013] Updating aperture counts using extracted products
[Sat Jun 22 17:59:29 2013] Total counts from fullrun_mos2_xmm0610000701_pi300-10000_pass1_cl_src57_src_b10.pi.gz = 1250.00
[Sat Jun 22 17:59:29 2013] Total counts from fullrun_mos2_xmm0610000701_pi300-10000_pass1_cl_src57_bgd.pi.gz = 510.00
[Sat Jun 22 17:59:29 2013] Got source and background scale factors 1139690.000000, 752554.000000
[Sat Jun 22 17:59:29 2013] User source parameters:
  Position = (393.0, 339.2) = 16 51 46.67 -45 19 7.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 477.6 +/- 36.4
  Background aperture counts = 772.4
  Rate = 0.01 +/- 0.001

[Sat Jun 22 17:59:29 2013] Updating counts from extracted products
[Sat Jun 22 17:59:29 2013] Set source signif. to 477.64/27.79 = 17.19
[Sat Jun 22 17:59:56 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 17:59:56 2013] Using photon index=1.80, rate=0.0127, arf fullrun_mos2_xmm0610000701_pi300-10000_pass1_cl_src57.arf
[Sat Jun 22 17:59:56 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 17:59:56 2013] Updating source flux to 3.5e-13
[Sat Jun 22 18:00:03 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 18:00:47 2013] xmm0610000701/analysis//spectral/fullrun_mos2_xmm0610000701_pi300-10000_pass1_cl_src57_pl.csv not found, spectral fit skipped or did not complete