[Mon May 6 01:31:09 2013] Detection parameters: Position = (210.8, 113.2) = 4 19 13.52 57 20 19.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 334.7 +/- 26.8 Background counts = 116.9 Rate = 0.005 +/- 0.0004 [Mon May 6 01:31:09 2013] Off-axis axis estimate = 14.86' [Mon May 6 02:11:12 2013] Using EEF radius (= 13.86 ")to estimate initial spatial extent for simple fitting [Mon May 6 02:11:12 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Mon May 6 02:11:12 2013] Initial guess for spatial extent in simple fitting = 13.86" [Mon May 6 02:11:12 2013] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.030 [Mon May 6 02:11:12 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 13.86" [Mon May 6 02:22:00 2013] fullrun_mos1_xmm0610000601_pi300-10000_cl_pass0_src3.ximg exists [Mon May 6 02:22:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0610000601_pi300-10000_cl_pass0_src3.csv [Mon May 6 02:22:00 2013] fullrun_mos1_xmm0610000601_pi300-10000_cl_pass0_src3_1.ximg exists [Mon May 6 02:22:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0610000601_pi300-10000_cl_pass0_src3.csv [Mon May 6 02:22:00 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0610000601_pi300-10000_cl_pass0_src3_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0610000601_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 6 02:22:00 2013] fullrun_mos1_xmm0610000601_pi300-10000_cl_pass0_tfrozen_src3.ximg exists [Mon May 6 02:22:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0610000601_pi300-10000_cl_pass0_tfrozen_src3.csv [Mon May 6 02:22:00 2013] fullrun_mos1_xmm0610000601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists [Mon May 6 02:22:00 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0610000601_pi300-10000_cl_pass0_tfrozen_src3.csv [Mon May 6 02:22:00 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0610000601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0610000601_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 6 02:35:38 2013] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 16.792452 pixels away [Mon May 6 02:35:38 2013] Vigneting correction estimate = 1.000000 [Mon May 6 02:35:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 6 02:35:38 2013] Assessing source extent using major [Mon May 6 02:35:38 2013] Source does appear to be extended [Mon May 6 02:35:38 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon May 6 03:05:23 2013] Using EEF radius (= 13.86 ")to estimate initial spatial extent for simple fitting [Mon May 6 03:05:23 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Mon May 6 03:05:23 2013] Initial guess for spatial extent in simple fitting = 13.86" [Mon May 6 03:05:23 2013] source mask rpix=3.2, npix_max = 54, mask sum = 56, frac = 1.030 [Mon May 6 03:05:23 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 13.86" [Mon May 6 03:13:49 2013] fullrun_mos1_xmm0610000601_pi300-10000_cl_pass1_src3.ximg exists [Mon May 6 03:13:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0610000601_pi300-10000_cl_pass1_src3.csv [Mon May 6 03:13:49 2013] fullrun_mos1_xmm0610000601_pi300-10000_cl_pass1_src3_1.ximg exists [Mon May 6 03:13:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0610000601_pi300-10000_cl_pass1_src3.csv [Mon May 6 03:13:49 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0610000601_pi300-10000_cl_pass1_src3_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0610000601_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 6 03:13:49 2013] fullrun_mos1_xmm0610000601_pi300-10000_cl_pass1_tfrozen_src3.ximg exists [Mon May 6 03:13:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0610000601_pi300-10000_cl_pass1_tfrozen_src3.csv [Mon May 6 03:13:49 2013] fullrun_mos1_xmm0610000601_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists [Mon May 6 03:13:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0610000601_pi300-10000_cl_pass1_tfrozen_src3.csv [Mon May 6 03:13:49 2013] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0610000601_pi300-10000_cl_pass1_tfrozen_src3_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0610000601_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 6 03:24:09 2013] Spatial fit model total counts = 786.421000, observed total counts = 651.000000 [Mon May 6 03:24:09 2013] Poor agreement between spatial fit and data for source 7 It may help to tweak spatial fit manually Not incorporating fit results [Mon May 6 03:24:09 2013] Vigneting correction estimate = 1.000000 [Mon May 6 03:24:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 6 03:24:09 2013] Assessing source extent using major [Mon May 6 03:24:09 2013] Source does appear to be extended [Mon May 6 03:24:09 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Mon May 6 04:38:09 2013] XMMSAS src. selection expression = ellipse(18290.017014, 9795.595268, 652.500000, 652.500000, 0.000000, X, Y) [Mon May 6 04:38:09 2013] Writing source region out to fullrun_mos1_xmm0610000601_pi300-10000_pass1_cl_src7_src.reg [Mon May 6 04:38:09 2013] Extracting stamp from image fullrun_mos1_xmm0610000601_pi300-10000_cl_sm2.00.img.gz, (173, 76) - (248, 151) [Mon May 6 04:38:09 2013] XMMSAS bgd. selection expression = annulus(18290.017014, 9795.595268, 1087.500000, 2175.000000, X, Y) [Mon May 6 04:38:09 2013] Writing fullrun_mos1_xmm0610000601_pi300-10000_pass1_cl_src7.gif [Mon May 6 04:41:15 2013] Mean detx,y = (14887.82, 5788.51) [Mon May 6 04:41:16 2013] Setting backscal keywords in source and bgd. spectrum [Mon May 6 04:41:37 2013] Binned source spectrum to 10 counts/bin [Mon May 6 04:41:37 2013] Setting source spectrum file to fullrun_mos1_xmm0610000601_pi300-10000_pass1_cl_src7_src_b10.pi.gz [Mon May 6 04:41:37 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0610000601_pi300-10000_pass1_cl_src7_bgd.pi.gz [Mon May 6 04:45:31 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Mon May 6 04:45:31 2013] rmf not generated due to insufficient counts [Mon May 6 04:55:51 2013] Updating aperture counts using extracted products [Mon May 6 04:55:51 2013] Total counts from fullrun_mos1_xmm0610000601_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 489.00 [Mon May 6 04:55:51 2013] Total counts from fullrun_mos1_xmm0610000601_pi300-10000_pass1_cl_src7_bgd.pi.gz = 1314.00 [Mon May 6 04:55:51 2013] Got source and background scale factors 996462.000000, 5117459.000000 [Mon May 6 04:55:51 2013] User source parameters: Position = (210.8, 113.2) = 4 19 13.52 57 20 19.5 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 233.1 +/- 23.1 Background aperture counts = 255.9 Rate = 0.004 +/- 0.0004 [Mon May 6 04:55:51 2013] Updating counts from extracted products [Mon May 6 04:55:51 2013] Set source signif. to 233.14/16.00 = 14.58 [Mon May 6 04:55:51 2013] Calculating source flux in energy range 0.30-8.00 [Mon May 6 04:55:51 2013] Using photon index=1.80, rate=0.0043, arf fullrun_mos1_xmm0610000601_pi300-10000_pass1_cl_src7.arf [Mon May 6 04:55:51 2013] Assuming count rate is from the 0.30-10.00 bandpass [Mon May 6 04:55:51 2013] Updating source flux to 1.6e-13 [Mon May 6 04:55:53 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Mon May 6 04:55:54 2013] xmm0610000601/analysis//spectral/fullrun_mos1_xmm0610000601_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete