[Sat Mar 10 10:04:37 2012] Detection parameters:
  Position = (505.8, 215.0) = 14 2 22.05 -0 10 26.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 98.5 +/- 17.2
  Background counts = 52.0
  Rate = 0.004 +/- 0.0008

[Sat Mar 10 10:04:37 2012] Off-axis axis estimate = 16.20'
[Sat Mar 10 10:08:17 2012] Using EEF radius (= 14.53 ")to estimate initial spatial extent for simple fitting
[Sat Mar 10 10:08:17 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Mar 10 10:08:17 2012] Initial guess for spatial extent in simple fitting = 14.53"
[Sat Mar 10 10:08:17 2012] source mask rpix=3.3, npix_max = 58, mask sum = 64, frac = 1.085
[Sat Mar 10 10:08:17 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 14.53"
[Sat Mar 10 10:54:14 2012] fullrun_pn_xmm0606430501_pi300-10000_cl_pass0_src20.ximg exists
[Sat Mar 10 10:54:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0606430501_pi300-10000_cl_pass0_src20.csv
[Sat Mar 10 10:54:14 2012] fullrun_pn_xmm0606430501_pi300-10000_cl_pass0_src20_1.ximg exists
[Sat Mar 10 10:54:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0606430501_pi300-10000_cl_pass0_src20.csv
[Sat Mar 10 10:54:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0606430501_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0606430501_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 10:54:14 2012] fullrun_pn_xmm0606430501_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Sat Mar 10 10:54:14 2012] fullrun_pn_xmm0606430501_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Sat Mar 10 10:54:14 2012] Fit fullrun_pn_xmm0606430501_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Sat Mar 10 12:04:16 2012] Source 20 is offset by -5.354305 and 6.676446 pixels which is larger than
2 X fitted extent = 1.670221 x 1.670221, not incorporating fit results
[Sat Mar 10 12:04:16 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 12:04:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 12:04:16 2012] Assessing source extent using major
[Sat Mar 10 12:04:16 2012] Source does appear to be extended
[Sat Mar 10 12:04:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 12:04:41 2012] Using EEF radius (= 14.53 ")to estimate initial spatial extent for simple fitting
[Sat Mar 10 12:04:41 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Mar 10 12:04:41 2012] Initial guess for spatial extent in simple fitting = 14.53"
[Sat Mar 10 12:04:41 2012] source mask rpix=3.3, npix_max = 58, mask sum = 64, frac = 1.085
[Sat Mar 10 12:04:41 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 14.53"
[Sat Mar 10 12:50:18 2012] fullrun_pn_xmm0606430501_pi300-10000_cl_pass1_src19.ximg exists
[Sat Mar 10 12:50:18 2012] fullrun_pn_xmm0606430501_pi300-10000_cl_pass1_src19_1.ximg exists
[Sat Mar 10 12:50:18 2012] Fit fullrun_pn_xmm0606430501_pi300-10000_cl_pass1_src19 appears to have run properly
[Sat Mar 10 12:50:18 2012] fullrun_pn_xmm0606430501_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Sat Mar 10 12:50:18 2012] fullrun_pn_xmm0606430501_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Sat Mar 10 12:50:18 2012] Fit fullrun_pn_xmm0606430501_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Sat Mar 10 14:05:11 2012] Source 20 is offset by -5.390673 and 6.677090 pixels which is larger than
2 X fitted extent = 1.670221 x 1.670221, not incorporating fit results
[Sat Mar 10 14:05:11 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 14:05:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 14:05:11 2012] Assessing source extent using major
[Sat Mar 10 14:05:11 2012] Source does appear to be extended
[Sat Mar 10 14:05:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 14:05:37 2012] XMMSAS src. selection expression = ellipse(43956.741455, 18659.656830, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Mar 10 14:05:37 2012] Writing source region out to fullrun_pn_xmm0606430501_pi300-10000_pass1_cl_src20_src.reg
[Sat Mar 10 14:05:37 2012] Extracting stamp from image fullrun_pn_xmm0606430501_pi300-10000_cl_sm2.00.img.gz, (468, 178) - (543, 253)
[Sat Mar 10 14:05:37 2012] XMMSAS bgd. selection expression = annulus(43956.741455, 18659.656830, 1087.500000, 2175.000000, X, Y)
[Sat Mar 10 14:05:37 2012] Writing fullrun_pn_xmm0606430501_pi300-10000_pass1_cl_src20.gif
[Sat Mar 10 14:24:08 2012] Mean detx,y = (-14464.19, -12594.01) 
[Sat Mar 10 14:24:14 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 10 14:25:11 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 10 14:25:12 2012] Setting source spectrum file to fullrun_pn_xmm0606430501_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sat Mar 10 14:25:12 2012] Setting bgd. spectrum file to fullrun_pn_xmm0606430501_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Sat Mar 10 14:45:22 2012] Not generating rmf since there are only 98 counts
[Sat Mar 10 14:45:22 2012] rmf not generated due to insufficient counts
[Sat Mar 10 15:20:33 2012] Updating aperture counts using extracted products
[Sat Mar 10 15:20:33 2012] Error reading totcts from fullrun_pn_xmm0606430501_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sat Mar 10 15:20:35 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 10 15:20:35 2012] Using photon index=1.80, rate=0.00447, arf fullrun_pn_xmm0606430501_pi300-10000_pass1_cl_src20.arf
[Sat Mar 10 15:20:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 10 15:20:35 2012] Updating source flux to 4.6e-13
[Sat Mar 10 15:21:14 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting