[Sat Mar 10 10:05:36 2012] Detection parameters:
  Position = (345.2, 277.1) = 14 3 8.62 -0 6 0.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 197.1 +/- 17.7
  Background counts = 11.7
  Rate = 0.01 +/- 0.0009

[Sat Mar 10 10:05:37 2012] Off-axis axis estimate = 3.73'
[Sat Mar 10 11:26:29 2012] Using EEF radius (= 8.29 ")to estimate initial spatial extent for simple fitting
[Sat Mar 10 11:26:29 2012] Initial guess for spatial extent in simple fitting = 8.29"
[Sat Mar 10 11:26:29 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.079
[Sat Mar 10 11:26:29 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.29"
[Sat Mar 10 12:04:07 2012] fullrun_mos2_xmm0606430501_pi300-10000_cl_pass0_src1.ximg exists
[Sat Mar 10 12:04:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0606430501_pi300-10000_cl_pass0_src1.csv
[Sat Mar 10 12:04:07 2012] fullrun_mos2_xmm0606430501_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Mar 10 12:04:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0606430501_pi300-10000_cl_pass0_src1.csv
[Sat Mar 10 12:04:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0606430501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0606430501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 12:04:07 2012] fullrun_mos2_xmm0606430501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Mar 10 12:04:07 2012] fullrun_mos2_xmm0606430501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Mar 10 12:04:07 2012] Fit fullrun_mos2_xmm0606430501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Mar 10 12:04:27 2012] Spatial fit model total counts = 263.791000, observed total counts = 264.000000
[Sat Mar 10 12:04:27 2012] Offset between fit and detection position for source 2 = 0.069708 pixels
[Sat Mar 10 12:04:27 2012] 262.271000 total counts/ 136.382000 bgd. counts: snr = 10.779764
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.069708 pixels
  Position = (345.2, 277.2) = 14 3 8.63 -0 6 0.1
  Extent = 4.2 (3.6-4.9)", rotation angle = 0
  Source counts = 125.9 +/- 16.2
  Background counts = 136.4
  Rate = 0.005 +/- 0.0007
[Sat Mar 10 12:04:27 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 12:04:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 12:04:27 2012] Assessing source extent using major axis lower bound
[Sat Mar 10 12:04:27 2012] Source does appear to be extended
[Sat Mar 10 12:04:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 13:27:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Mar 10 13:27:49 2012] Initial guess for spatial extent in simple fitting = 4.20"
[Sat Mar 10 13:27:49 2012] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.049
[Sat Mar 10 13:27:49 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.20"
[Sat Mar 10 14:05:02 2012] fullrun_mos2_xmm0606430501_pi300-10000_cl_pass1_src1.ximg exists
[Sat Mar 10 14:05:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0606430501_pi300-10000_cl_pass1_src1.csv
[Sat Mar 10 14:05:02 2012] fullrun_mos2_xmm0606430501_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Mar 10 14:05:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0606430501_pi300-10000_cl_pass1_src1.csv
[Sat Mar 10 14:05:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0606430501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0606430501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 14:05:03 2012] fullrun_mos2_xmm0606430501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Mar 10 14:05:03 2012] fullrun_mos2_xmm0606430501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Mar 10 14:05:03 2012] Fit fullrun_mos2_xmm0606430501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Mar 10 14:05:23 2012] Spatial fit model total counts = 263.689000, observed total counts = 264.000000
[Sat Mar 10 14:05:23 2012] Offset between fit and detection position for source 2 = 0.002730 pixels
[Sat Mar 10 14:05:23 2012] 262.155000 total counts/ 135.514000 bgd. counts: snr = 10.878831
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.002730 pixels
  Position = (345.2, 277.2) = 14 3 8.62 -0 6 0.1
  Extent = 4.3 (3.6-4.9)", rotation angle = 0
  Source counts = 126.6 +/- 16.2
  Background counts = 135.5
  Rate = 0.005 +/- 0.0007
[Sat Mar 10 14:05:23 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 14:05:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 14:05:23 2012] Assessing source extent using major axis lower bound
[Sat Mar 10 14:05:23 2012] Source does appear to be extended
[Sat Mar 10 14:05:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 14:57:54 2012] XMMSAS src. selection expression = ellipse(29985.008740, 24068.001800, 256.429207, 256.429207, 0.000000, X, Y)
[Sat Mar 10 14:57:54 2012] Writing source region out to fullrun_mos2_xmm0606430501_pi300-10000_pass1_cl_src2_src.reg
[Sat Mar 10 14:57:54 2012] Extracting stamp from image fullrun_mos2_xmm0606430501_pi300-10000_cl_sm2.00.img.gz, (330, 262) - (360, 292)
[Sat Mar 10 14:57:54 2012] XMMSAS bgd. selection expression = annulus(29985.008740, 24068.001800, 427.382012, 854.764025, X, Y)
[Sat Mar 10 14:57:54 2012] Writing fullrun_mos2_xmm0606430501_pi300-10000_pass1_cl_src2.gif
[Sat Mar 10 14:57:57 2012] Mean detx,y = (4161.98, 1709.48) 
[Sat Mar 10 14:57:59 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 10 14:58:09 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 10 14:58:10 2012] Setting source spectrum file to fullrun_mos2_xmm0606430501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Mar 10 14:58:10 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0606430501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Mar 10 15:20:37 2012] Updating aperture counts using extracted products
[Sat Mar 10 15:20:37 2012] Error reading totcts from fullrun_mos2_xmm0606430501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Mar 10 15:20:39 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 10 15:20:39 2012] Using photon index=1.80, rate=0.00536, arf fullrun_mos2_xmm0606430501_pi300-10000_pass1_cl_src2.arf
[Sat Mar 10 15:20:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 10 15:20:39 2012] Updating source flux to 9.1e-14
[Sat Mar 10 15:21:14 2012] Reading fit data from xmm0606430501/analysis//spectral/fullrun_mos2_xmm0606430501_pi300-10000_pass1_cl_src2_pl.csv
[Sat Mar 10 15:21:14 2012] Spectral fit parameter nH value = 7.42848e+13
[Sat Mar 10 15:21:14 2012] Spectral fit parameter PhoIndex value = 1.78823
[Sat Mar 10 15:21:14 2012] Failed to get F(0.3-8.0) from xmm0606430501/analysis//spectral/fullrun_mos2_xmm0606430501_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sat Mar 10 15:21:14 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 10 15:21:14 2012] Using Nh = 7.4e+13, photon index=1.79, rate=0.00536, arf fullrun_mos2_xmm0606430501_pi300-10000_pass1_cl_src2.arf
[Sat Mar 10 15:21:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 10 15:21:14 2012] Updating source flux to 9.1e-14