[Sat Mar 10 10:05:02 2012] Detection parameters:
  Position = (338.6, 102.0) = 14 3 10.55 -0 18 42.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 69.9 +/- 12.4
  Background counts = 12.3
  Rate = 0.003 +/- 0.0005

[Sat Mar 10 10:05:02 2012] Off-axis axis estimate = 14.54'
[Sat Mar 10 10:54:15 2012] Using EEF radius (= 13.70 ")to estimate initial spatial extent for simple fitting
[Sat Mar 10 10:54:15 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Mar 10 10:54:15 2012] Initial guess for spatial extent in simple fitting = 13.70"
[Sat Mar 10 10:54:15 2012] source mask rpix=3.1, npix_max = 53, mask sum = 56, frac = 1.052
[Sat Mar 10 10:54:15 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 13.70"
[Sat Mar 10 11:26:28 2012] fullrun_mos1_xmm0606430501_pi300-10000_cl_pass0_src9.ximg exists
[Sat Mar 10 11:26:28 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0606430501_pi300-10000_cl_pass0_src9.csv
[Sat Mar 10 11:26:28 2012] fullrun_mos1_xmm0606430501_pi300-10000_cl_pass0_src9_1.ximg exists
[Sat Mar 10 11:26:28 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0606430501_pi300-10000_cl_pass0_src9.csv
[Sat Mar 10 11:26:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0606430501_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0606430501_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 11:26:29 2012] fullrun_mos1_xmm0606430501_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sat Mar 10 11:26:29 2012] fullrun_mos1_xmm0606430501_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sat Mar 10 11:26:29 2012] Fit fullrun_mos1_xmm0606430501_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Sat Mar 10 12:04:21 2012] Spatial fit model total counts = 337.930000, observed total counts = 338.000000
[Sat Mar 10 12:04:21 2012] Offset between fit and detection position for source 18 = 0.468651 pixels
[Sat Mar 10 12:04:21 2012] 338.190200 total counts/ 269.956000 bgd. counts: snr = 4.152940
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 0.468651 pixels
  Position = (338.1, 102.2) = 14 3 10.67 -0 18 41.3
  Extent = 10.2 (7.2-22.3)", rotation angle = 0
  Source counts = 68.2 +/- 18.4
  Background counts = 270.0
  Rate = 0.003 +/- 0.0008
[Sat Mar 10 12:04:21 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 12:04:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 12:04:21 2012] Assessing source extent using major axis lower bound
[Sat Mar 10 12:04:21 2012] Source does appear to be extended
[Sat Mar 10 12:04:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 12:50:18 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Mar 10 12:50:18 2012] Initial guess for spatial extent in simple fitting = 10.21"
[Sat Mar 10 12:50:18 2012] source mask rpix=2.3, npix_max = 32, mask sum = 36, frac = 1.111
[Sat Mar 10 12:50:18 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 10.21"
[Sat Mar 10 13:27:49 2012] fullrun_mos1_xmm0606430501_pi300-10000_cl_pass1_src9.ximg exists
[Sat Mar 10 13:27:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0606430501_pi300-10000_cl_pass1_src9.csv
[Sat Mar 10 13:27:49 2012] fullrun_mos1_xmm0606430501_pi300-10000_cl_pass1_src9_1.ximg exists
[Sat Mar 10 13:27:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0606430501_pi300-10000_cl_pass1_src9.csv
[Sat Mar 10 13:27:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0606430501_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0606430501_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 13:27:49 2012] fullrun_mos1_xmm0606430501_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sat Mar 10 13:27:49 2012] fullrun_mos1_xmm0606430501_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sat Mar 10 13:27:49 2012] Fit fullrun_mos1_xmm0606430501_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Sat Mar 10 14:05:18 2012] Warning, spatial fit 9 centroid is now closest to src. 17
[Sat Mar 10 14:05:18 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 14:05:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 14:05:18 2012] Assessing source extent using major axis lower bound
[Sat Mar 10 14:05:18 2012] Source does appear to be extended
[Sat Mar 10 14:05:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 14:47:49 2012] XMMSAS src. selection expression = ellipse(29369.978200, 8843.686600, 612.372018, 612.372018, 0.000000, X, Y)
[Sat Mar 10 14:47:49 2012] Writing source region out to fullrun_mos1_xmm0606430501_pi300-10000_pass1_cl_src18_src.reg
[Sat Mar 10 14:47:49 2012] Extracting stamp from image fullrun_mos1_xmm0606430501_pi300-10000_cl_sm2.00.img.gz, (303, 67) - (373, 137)
[Sat Mar 10 14:47:49 2012] XMMSAS bgd. selection expression = annulus(29369.978200, 8843.686600, 1020.620029, 2041.240059, X, Y)
[Sat Mar 10 14:47:49 2012] Writing fullrun_mos1_xmm0606430501_pi300-10000_pass1_cl_src18.gif
[Sat Mar 10 14:51:30 2012] Mean detx,y = (15570.05, 2493.25) 
[Sat Mar 10 14:51:32 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 10 14:51:57 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 10 14:51:58 2012] Setting source spectrum file to fullrun_mos1_xmm0606430501_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sat Mar 10 14:51:58 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0606430501_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Sat Mar 10 14:56:40 2012] Not generating rmf since there are only 68 counts
[Sat Mar 10 14:56:40 2012] rmf not generated due to insufficient counts
[Sat Mar 10 15:20:36 2012] Updating aperture counts using extracted products
[Sat Mar 10 15:20:36 2012] Error reading totcts from fullrun_mos1_xmm0606430501_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Sat Mar 10 15:20:37 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 10 15:20:37 2012] Using photon index=1.80, rate=0.00289, arf fullrun_mos1_xmm0606430501_pi300-10000_pass1_cl_src18.arf
[Sat Mar 10 15:20:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 10 15:20:37 2012] Updating source flux to 7.4e-14
[Sat Mar 10 15:20:41 2012] Source 18 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Mar 10 15:20:42 2012] xmm0606430501/analysis//spectral/fullrun_mos1_xmm0606430501_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete