[Sun Jul 22 15:17:53 2012] Detection parameters:
  Position = (442.7, 272.5) = 16 48 16.47 53 1 0.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 47.8 +/- 11.3
  Background counts = 25.9
  Rate = 0.006 +/- 0.001

[Sun Jul 22 15:17:53 2012] Off-axis axis estimate = 10.62'
[Sun Jul 22 15:28:29 2012] Using EEF radius (= 11.74 ")to estimate initial spatial extent for simple fitting
[Sun Jul 22 15:28:29 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jul 22 15:28:29 2012] Initial guess for spatial extent in simple fitting = 11.74"
[Sun Jul 22 15:28:29 2012] source mask rpix=2.7, npix_max = 40, mask sum = 49, frac = 1.197
[Sun Jul 22 15:28:29 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.74"
[Sun Jul 22 15:36:14 2012] fullrun_mos1_xmm0606430201_pi300-10000_cl_pass0_src3.ximg exists
[Sun Jul 22 15:36:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0606430201_pi300-10000_cl_pass0_src3.csv
[Sun Jul 22 15:36:14 2012] fullrun_mos1_xmm0606430201_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Jul 22 15:36:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0606430201_pi300-10000_cl_pass0_src3.csv
[Sun Jul 22 15:36:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0606430201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0606430201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 15:36:14 2012] fullrun_mos1_xmm0606430201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Jul 22 15:36:14 2012] fullrun_mos1_xmm0606430201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Jul 22 15:36:14 2012] Fit fullrun_mos1_xmm0606430201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Jul 22 15:51:31 2012] Spatial fit model total counts = 199.997000, observed total counts = 200.000000
[Sun Jul 22 15:51:31 2012] Offset between fit and detection position for source 3 = 0.480522 pixels
[Sun Jul 22 15:51:31 2012] 201.805300 total counts/ 174.717000 bgd. counts: snr = 2.049341
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.480522 pixels
  Position = (442.2, 272.4) = 16 48 16.70 53 1 0.7
  Extent = 5.6 (2.9-11.1)", rotation angle = 0
  Source counts = 27.1 +/- 14.2
  Background counts = 174.7
  Rate = 0.002 +/- 0.001
[Sun Jul 22 15:51:31 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 15:51:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 15:51:31 2012] Assessing source extent using major axis lower bound
[Sun Jul 22 15:51:31 2012] Source does appear to be extended
[Sun Jul 22 15:51:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 22 15:57:51 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jul 22 15:57:51 2012] Initial guess for spatial extent in simple fitting = 5.64"
[Sun Jul 22 15:57:51 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.930
[Sun Jul 22 15:57:51 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 5.64"
[Sun Jul 22 16:04:48 2012] fullrun_mos1_xmm0606430201_pi300-10000_cl_pass1_src3.ximg exists
[Sun Jul 22 16:04:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0606430201_pi300-10000_cl_pass1_src3.csv
[Sun Jul 22 16:04:48 2012] fullrun_mos1_xmm0606430201_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Jul 22 16:04:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0606430201_pi300-10000_cl_pass1_src3.csv
[Sun Jul 22 16:04:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0606430201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0606430201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul 22 16:04:48 2012] fullrun_mos1_xmm0606430201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Jul 22 16:04:48 2012] fullrun_mos1_xmm0606430201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Jul 22 16:04:48 2012] Fit fullrun_mos1_xmm0606430201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Jul 22 16:21:45 2012] Spatial fit model total counts = 199.999000, observed total counts = 200.000000
[Sun Jul 22 16:21:45 2012] Offset between fit and detection position for source 3 = 0.015086 pixels
[Sun Jul 22 16:21:45 2012] 201.813200 total counts/ 174.582000 bgd. counts: snr = 2.060948
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.015086 pixels
  Position = (442.2, 272.4) = 16 48 16.71 53 1 0.6
  Extent = 5.7 (2.7-11.2)", rotation angle = 0
  Source counts = 27.2 +/- 14.2
  Background counts = 174.6
  Rate = 0.002 +/- 0.001
[Sun Jul 22 16:21:45 2012] Vigneting correction estimate = 1.000000
[Sun Jul 22 16:21:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul 22 16:21:45 2012] Assessing source extent using major axis lower bound
[Sun Jul 22 16:21:45 2012] Source does appear to be extended
[Sun Jul 22 16:21:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul 22 16:33:02 2012] XMMSAS src. selection expression = ellipse(38421.371860, 23647.433000, 340.406410, 340.406410, 0.000000, X, Y)
[Sun Jul 22 16:33:02 2012] Writing source region out to fullrun_mos1_xmm0606430201_pi300-10000_pass1_cl_src3_src.reg
[Sun Jul 22 16:33:02 2012] Extracting stamp from image fullrun_mos1_xmm0606430201_pi300-10000_cl_sm2.00.img.gz, (423, 253) - (462, 292)
[Sun Jul 22 16:33:02 2012] XMMSAS bgd. selection expression = annulus(38421.371860, 23647.433000, 567.344016, 1134.688033, X, Y)
[Sun Jul 22 16:33:02 2012] Writing fullrun_mos1_xmm0606430201_pi300-10000_pass1_cl_src3.gif
[Sun Jul 22 16:33:43 2012] Mean detx,y = (5496.75, 9298.93) 
[Sun Jul 22 16:33:45 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul 22 16:33:56 2012] Binned source spectrum to 10 counts/bin
[Sun Jul 22 16:33:57 2012] Setting source spectrum file to fullrun_mos1_xmm0606430201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Jul 22 16:33:57 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0606430201_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Jul 22 16:39:37 2012] Not generating rmf since there are only 27 counts
[Sun Jul 22 16:39:37 2012] rmf not generated due to insufficient counts
[Sun Jul 22 16:51:01 2012] Updating aperture counts using extracted products
[Sun Jul 22 16:51:01 2012] Error reading totcts from fullrun_mos1_xmm0606430201_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun Jul 22 16:51:01 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul 22 16:51:01 2012] Using photon index=1.80, rate=0.00248, arf fullrun_mos1_xmm0606430201_pi300-10000_pass1_cl_src3.arf
[Sun Jul 22 16:51:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul 22 16:51:01 2012] Updating source flux to 4.7e-14
[Sun Jul 22 16:51:02 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting