[Fri Feb 10 23:25:34 2012] Detection parameters:
  Position = (320.0, 309.2) = 1 32 36.67 30 32 26.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 53.9 +/- 9.6
  Background counts = 7.1
  Rate = 0.003 +/- 0.0006

[Fri Feb 10 23:25:34 2012] Off-axis axis estimate = 1.75'
[Sat Feb 11 00:08:48 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Sat Feb 11 00:08:48 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Sat Feb 11 00:08:48 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.842
[Sat Feb 11 00:08:48 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 7.30"
[Sat Feb 11 00:25:50 2012] fullrun_mos2_xmm0606371201_pi300-10000_cl_pass0_src11.ximg exists
[Sat Feb 11 00:25:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0606371201_pi300-10000_cl_pass0_src11.csv
[Sat Feb 11 00:25:50 2012] fullrun_mos2_xmm0606371201_pi300-10000_cl_pass0_src11_1.ximg exists
[Sat Feb 11 00:25:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0606371201_pi300-10000_cl_pass0_src11.csv
[Sat Feb 11 00:25:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0606371201_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0606371201_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 11 00:25:50 2012] fullrun_mos2_xmm0606371201_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sat Feb 11 00:25:50 2012] fullrun_mos2_xmm0606371201_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sat Feb 11 00:25:50 2012] Fit fullrun_mos2_xmm0606371201_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sat Feb 11 00:25:57 2012] Source 17 is offset by 6.763110 and 5.893726 pixels which is larger than
2 X fitted extent = 0.839471 x 0.839471, not incorporating fit results
[Sat Feb 11 00:25:57 2012] Vigneting correction estimate = 1.000000
[Sat Feb 11 00:25:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 11 00:25:57 2012] Assessing source extent using major
[Sat Feb 11 00:25:57 2012] Source does appear to be extended
[Sat Feb 11 00:25:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 11 01:09:44 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Sat Feb 11 01:09:44 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Sat Feb 11 01:09:44 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.842
[Sat Feb 11 01:09:44 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 7.30"
[Sat Feb 11 01:25:11 2012] fullrun_mos2_xmm0606371201_pi300-10000_cl_pass1_src11.ximg exists
[Sat Feb 11 01:25:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0606371201_pi300-10000_cl_pass1_src11.csv
[Sat Feb 11 01:25:11 2012] fullrun_mos2_xmm0606371201_pi300-10000_cl_pass1_src11_1.ximg exists
[Sat Feb 11 01:25:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0606371201_pi300-10000_cl_pass1_src11.csv
[Sat Feb 11 01:25:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0606371201_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0606371201_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 11 01:25:11 2012] fullrun_mos2_xmm0606371201_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sat Feb 11 01:25:11 2012] fullrun_mos2_xmm0606371201_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sat Feb 11 01:25:11 2012] Fit fullrun_mos2_xmm0606371201_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Sat Feb 11 01:25:18 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 119.423471 pixels away
[Sat Feb 11 01:25:18 2012] Source 17 is offset by 6.763110 and 5.893726 pixels which is larger than
2 X fitted extent = 6.715770 x 6.715770, not incorporating fit results
[Sat Feb 11 01:25:18 2012] Vigneting correction estimate = 1.000000
[Sat Feb 11 01:25:18 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 11 01:25:18 2012] Assessing source extent using major
[Sat Feb 11 01:25:18 2012] Source does appear to be extended
[Sat Feb 11 01:25:18 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 11 01:55:03 2012] XMMSAS src. selection expression = ellipse(27795.620605, 26849.984131, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Feb 11 01:55:03 2012] Writing source region out to fullrun_mos2_xmm0606371201_pi300-10000_pass1_cl_src17_src.reg
[Sat Feb 11 01:55:03 2012] Extracting stamp from image fullrun_mos2_xmm0606371201_pi300-10000_cl_sm2.00.img.gz, (283, 272) - (358, 347)
[Sat Feb 11 01:55:03 2012] XMMSAS bgd. selection expression = annulus(27795.620605, 26849.984131, 1087.500000, 2175.000000, X, Y)
[Sat Feb 11 01:55:03 2012] Writing fullrun_mos2_xmm0606371201_pi300-10000_pass1_cl_src17.gif
[Sat Feb 11 01:57:49 2012] Mean detx,y = (51.04, 124.92) 
[Sat Feb 11 01:57:50 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Feb 11 01:57:55 2012] Binned source spectrum to 10 counts/bin
[Sat Feb 11 01:57:55 2012] Setting source spectrum file to fullrun_mos2_xmm0606371201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sat Feb 11 01:57:55 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0606371201_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Sat Feb 11 02:06:35 2012] Not generating rmf since there are only 53 counts
[Sat Feb 11 02:06:35 2012] rmf not generated due to insufficient counts
[Sat Feb 11 02:07:14 2012] Updating aperture counts using extracted products
[Sat Feb 11 02:07:14 2012] Error reading totcts from fullrun_mos2_xmm0606371201_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sat Feb 11 02:07:14 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 11 02:07:14 2012] Using photon index=1.80, rate=0.00332, arf fullrun_mos2_xmm0606371201_pi300-10000_pass1_cl_src17.arf
[Sat Feb 11 02:07:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Feb 11 02:07:14 2012] Updating source flux to 3.7e-14
[Sat Feb 11 02:07:27 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting