[Fri Feb 10 23:25:20 2012] Detection parameters:
  Position = (150.2, 291.5) = 1 33 33.86 30 31 10.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 33.5 +/- 8.4
  Background counts = 6.3
  Rate = 0.002 +/- 0.0005

[Fri Feb 10 23:25:20 2012] Off-axis axis estimate = 10.76'
[Fri Feb 10 23:54:38 2012] Using EEF radius (= 11.81 ")to estimate initial spatial extent for simple fitting
[Fri Feb 10 23:54:38 2012] Initial guess for spatial extent in simple fitting = 11.81"
[Fri Feb 10 23:54:38 2012] source mask rpix=2.7, npix_max = 41, mask sum = 39, frac = 0.943
[Fri Feb 10 23:54:38 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 11.81"
[Sat Feb 11 00:08:48 2012] fullrun_mos1_xmm0606371201_pi300-10000_cl_pass0_src13.ximg exists
[Sat Feb 11 00:08:48 2012] fullrun_mos1_xmm0606371201_pi300-10000_cl_pass0_src13_1.ximg exists
[Sat Feb 11 00:08:48 2012] Fit fullrun_mos1_xmm0606371201_pi300-10000_cl_pass0_src13 appears to have run properly
[Sat Feb 11 00:08:48 2012] fullrun_mos1_xmm0606371201_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Sat Feb 11 00:08:48 2012] fullrun_mos1_xmm0606371201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Sat Feb 11 00:08:48 2012] Fit fullrun_mos1_xmm0606371201_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Sat Feb 11 00:25:55 2012] Spatial fit model total counts = 136.997000, observed total counts = 137.000000
[Sat Feb 11 00:25:55 2012] Offset between fit and detection position for source 9 = 3.793155 pixels
[Sat Feb 11 00:25:55 2012] 133.141000 total counts/ 55.570300 bgd. counts: snr = 10.405821
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 3.793155 pixels
  Position = (149.1, 295.1) = 1 33 34.22 30 31 24.9
  Extent = 17.5 (7.4-23.6)", rotation angle = 0
  Source counts = 77.6 +/- 11.5
  Background counts = 55.6
  Rate = 0.005 +/- 0.0007
[Sat Feb 11 00:25:55 2012] Vigneting correction estimate = 1.000000
[Sat Feb 11 00:25:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 11 00:25:55 2012] Assessing source extent using major axis lower bound
[Sat Feb 11 00:25:55 2012] Source does appear to be extended
[Sat Feb 11 00:25:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 11 00:25:55 2012] Source is confused with source 1
[Sat Feb 11 00:57:55 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Feb 11 00:57:55 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Feb 11 00:57:55 2012] Initial guess for spatial extent in simple fitting = 17.51"
[Sat Feb 11 00:57:55 2012] source mask rpix=4.0, npix_max = 81, mask sum = 77, frac = 0.940
[Sat Feb 11 00:57:55 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 17.51"
[Sat Feb 11 01:09:44 2012] fullrun_mos1_xmm0606371201_pi300-10000_cl_pass1_src12.ximg exists
[Sat Feb 11 01:09:44 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0606371201_pi300-10000_cl_pass1_src12.csv
[Sat Feb 11 01:09:44 2012] fullrun_mos1_xmm0606371201_pi300-10000_cl_pass1_src12_1.ximg exists
[Sat Feb 11 01:09:44 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0606371201_pi300-10000_cl_pass1_src12.csv
[Sat Feb 11 01:09:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0606371201_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0606371201_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 11 01:09:44 2012] fullrun_mos1_xmm0606371201_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Sat Feb 11 01:09:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0606371201_pi300-10000_cl_pass1_tfrozen_src12.csv
[Sat Feb 11 01:09:44 2012] fullrun_mos1_xmm0606371201_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Sat Feb 11 01:09:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0606371201_pi300-10000_cl_pass1_tfrozen_src12.csv
[Sat Feb 11 01:09:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0606371201_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0606371201_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Feb 11 01:25:16 2012] Spatial fit model total counts = -69.241200, observed total counts = 838.000000
[Sat Feb 11 01:25:16 2012] Poor agreement between spatial fit and data for source 9
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Feb 11 01:25:16 2012] Vigneting correction estimate = 1.000000
[Sat Feb 11 01:25:16 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Feb 11 01:25:16 2012] Assessing source extent using major axis lower bound
[Sat Feb 11 01:25:16 2012] Source does appear to be extended
[Sat Feb 11 01:25:16 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Feb 11 01:46:01 2012] XMMSAS src. selection expression = ellipse(12925.096600, 25629.536000, 1050.846030, 1050.846030, 0.000000, X, Y)
[Sat Feb 11 01:46:01 2012] Writing source region out to fullrun_mos1_xmm0606371201_pi300-10000_pass1_cl_src9_src.reg
[Sat Feb 11 01:46:01 2012] Extracting stamp from image fullrun_mos1_xmm0606371201_pi300-10000_cl_sm2.00.img.gz, (89, 235) - (210, 356)
[Sat Feb 11 01:46:01 2012] XMMSAS bgd. selection expression = annulus(12925.096600, 25629.536000, 1751.410050, 3502.820101, X, Y) && !ellipse(12946.575000, 26556.268200, 517.956015, 517.956015, 0.000000, X, Y) && !ellipse(13704.062140, 28125.556640, 540.252016, 540.252016, 0.000000, X, Y) && !ellipse(13835.029190, 28850.657562, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Feb 11 01:46:01 2012] Writing fullrun_mos1_xmm0606371201_pi300-10000_pass1_cl_src9.gif
[Sat Feb 11 01:47:46 2012] Mean detx,y = (-7288.54, -12933.21) 
[Sat Feb 11 01:47:46 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Feb 11 01:48:01 2012] Binned source spectrum to 10 counts/bin
[Sat Feb 11 01:48:01 2012] Setting source spectrum file to fullrun_mos1_xmm0606371201_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sat Feb 11 01:48:01 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0606371201_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Sat Feb 11 01:54:53 2012] Not generating rmf since there are only 77 counts
[Sat Feb 11 01:54:53 2012] rmf not generated due to insufficient counts
[Sat Feb 11 02:07:14 2012] Updating aperture counts using extracted products
[Sat Feb 11 02:07:14 2012] Error reading totcts from fullrun_mos1_xmm0606371201_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sat Feb 11 02:07:14 2012] Calculating source flux in energy range 0.30-8.00
[Sat Feb 11 02:07:14 2012] Using photon index=1.80, rate=0.00459, arf fullrun_mos1_xmm0606371201_pi300-10000_pass1_cl_src9.arf
[Sat Feb 11 02:07:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Feb 11 02:07:14 2012] Updating source flux to 1.2e-13
[Sat Feb 11 02:07:15 2012] Flag p found in src. 9 procflags, skipping spectral fitting
[Sat Feb 11 02:07:15 2012] Flag c found in src. 9 procflags, skipping spectral fitting
[Sat Feb 11 02:07:15 2012] Source 9 has fewer than 100.000000 counts, skipping spectral fitting