[Sun Mar 18 22:24:20 2012] Detection parameters:
  Position = (165.0, 240.1) = 1 33 28.90 30 27 24.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2784.1 +/- 64.8
  Background counts = 81.7
  Rate = 0.2 +/- 0.005

[Sun Mar 18 22:24:20 2012] Off-axis axis estimate = 10.56'
[Sun Mar 18 22:27:32 2012] Using EEF radius (= 11.71 ")to estimate initial spatial extent for simple fitting
[Sun Mar 18 22:27:32 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Mar 18 22:27:32 2012] Initial guess for spatial extent in simple fitting = 11.71"
[Sun Mar 18 22:27:32 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.884
[Sun Mar 18 22:27:32 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 11.71"
[Sun Mar 18 22:45:27 2012] fullrun_pn_xmm0606371101_pi300-10000_cl_pass0_src1.ximg exists
[Sun Mar 18 22:45:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0606371101_pi300-10000_cl_pass0_src1.csv
[Sun Mar 18 22:45:27 2012] fullrun_pn_xmm0606371101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Mar 18 22:45:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0606371101_pi300-10000_cl_pass0_src1.csv
[Sun Mar 18 22:45:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0606371101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0606371101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 22:45:27 2012] fullrun_pn_xmm0606371101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Mar 18 22:45:27 2012] fullrun_pn_xmm0606371101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Mar 18 22:45:27 2012] Fit fullrun_pn_xmm0606371101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Mar 18 23:10:48 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 14.955692 pixels away
[Sun Mar 18 23:10:48 2012] Vigneting correction estimate = 1.000000
[Sun Mar 18 23:10:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 18 23:10:48 2012] Assessing source extent using major
[Sun Mar 18 23:10:48 2012] Source does appear to be extended
[Sun Mar 18 23:10:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 18 23:11:03 2012] Using EEF radius (= 11.71 ")to estimate initial spatial extent for simple fitting
[Sun Mar 18 23:11:03 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Mar 18 23:11:03 2012] Initial guess for spatial extent in simple fitting = 11.71"
[Sun Mar 18 23:11:03 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.884
[Sun Mar 18 23:11:03 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 11.71"
[Sun Mar 18 23:35:23 2012] fullrun_pn_xmm0606371101_pi300-10000_cl_pass1_src1.ximg exists
[Sun Mar 18 23:35:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0606371101_pi300-10000_cl_pass1_src1.csv
[Sun Mar 18 23:35:23 2012] fullrun_pn_xmm0606371101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Mar 18 23:35:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0606371101_pi300-10000_cl_pass1_src1.csv
[Sun Mar 18 23:35:23 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0606371101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0606371101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 18 23:35:23 2012] fullrun_pn_xmm0606371101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Mar 18 23:35:23 2012] fullrun_pn_xmm0606371101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Mar 18 23:35:23 2012] Fit fullrun_pn_xmm0606371101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Mar 19 00:05:07 2012] Spatial fit model total counts = 2177.000000, observed total counts = 2177.000000
[Mon Mar 19 00:05:07 2012] Offset between fit and detection position for source 1 = 0.230435 pixels
[Mon Mar 19 00:05:07 2012] 2191.980000 total counts/ 1095.870000 bgd. counts: snr = 33.111177
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.230435 pixels
  Position = (165.2, 240.3) = 1 33 28.85 30 27 23.7
  Extent = 6.7 (6.3-7.2)", rotation angle = 0
  Source counts = 1096.1 +/- 46.8
  Background counts = 1095.9
  Rate = 0.2 +/- 0.01
[Mon Mar 19 00:05:07 2012] Vigneting correction estimate = 1.000000
[Mon Mar 19 00:05:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar 19 00:05:07 2012] Assessing source extent using major axis lower bound
[Mon Mar 19 00:05:07 2012] Source does appear to be extended
[Mon Mar 19 00:05:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar 19 00:05:21 2012] Counts = 1096.110000, rescaling region sizes by 2.000000
[Mon Mar 19 00:05:21 2012] XMMSAS src. selection expression = ellipse(14322.981400, 20856.647400, 805.236023, 805.236023, 0.000000, X, Y)
[Mon Mar 19 00:05:21 2012] Writing source region out to fullrun_pn_xmm0606371101_pi300-10000_pass1_cl_src1_src.reg
[Mon Mar 19 00:05:21 2012] Extracting stamp from image fullrun_pn_xmm0606371101_pi300-10000_cl_sm2.00.img.gz, (119, 194) - (211, 287)
[Mon Mar 19 00:05:21 2012] XMMSAS bgd. selection expression = annulus(14322.981400, 20856.647400, 2684.120077, 5368.240154, X, Y) && !ellipse(12864.711563, 26921.927460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13017.762054, 26312.784088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13026.600647, 25356.336334, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Mar 19 00:05:21 2012] Writing fullrun_pn_xmm0606371101_pi300-10000_pass1_cl_src1.gif
[Mon Mar 19 00:05:28 2012] Mean detx,y = (-9121.19, 11210.85) 
[Mon Mar 19 00:05:34 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar 19 00:07:16 2012] Binned source spectrum to 10 counts/bin
[Mon Mar 19 00:07:16 2012] Setting source spectrum file to fullrun_pn_xmm0606371101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Mar 19 00:07:16 2012] Setting bgd. spectrum file to fullrun_pn_xmm0606371101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Mar 19 00:46:03 2012] Updating aperture counts using extracted products
[Mon Mar 19 00:46:03 2012] Error reading totcts from fullrun_pn_xmm0606371101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Mar 19 00:46:03 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 19 00:46:03 2012] Using photon index=1.80, rate=0.227, arf fullrun_pn_xmm0606371101_pi300-10000_pass1_cl_src1.arf
[Mon Mar 19 00:46:03 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 19 00:46:03 2012] Updating source flux to 1.4e-12
[Mon Mar 19 00:48:02 2012] Reading fit data from xmm0606371101/analysis//spectral/fullrun_pn_xmm0606371101_pi300-10000_pass1_cl_src1_pl.csv
[Mon Mar 19 00:48:02 2012] Spectral fit parameter nH value = 1.0567e+21
[Mon Mar 19 00:48:02 2012] Spectral fit parameter PhoIndex value = 1.71115
[Mon Mar 19 00:48:02 2012] Failed to get F(0.3-8.0) from xmm0606371101/analysis//spectral/fullrun_pn_xmm0606371101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Mar 19 00:48:02 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar 19 00:48:02 2012] Using Nh = 1.1e+21, photon index=1.71, rate=0.227, arf fullrun_pn_xmm0606371101_pi300-10000_pass1_cl_src1.arf
[Mon Mar 19 00:48:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar 19 00:48:02 2012] Updating source flux to 1.9e-12