[Fri Nov 25 22:31:05 2011] Detection parameters:
  Position = (376.0, 220.9) = 1 32 17.68 30 25 52.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 35.7 +/- 8.3
  Background counts = 8.1
  Rate = 0.004 +/- 0.0009

[Fri Nov 25 22:31:05 2011] Off-axis axis estimate = 7.95'
[Fri Nov 25 23:00:32 2011] Using EEF radius (= 10.40 ")to estimate initial spatial extent for simple fitting
[Fri Nov 25 23:00:32 2011] Initial guess for spatial extent in simple fitting = 10.40"
[Fri Nov 25 23:00:32 2011] source mask rpix=2.4, npix_max = 33, mask sum = 34, frac = 1.017
[Fri Nov 25 23:00:32 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 10.40"
[Fri Nov 25 23:19:47 2011] fullrun_mos1_xmm0606370801_pi300-10000_cl_pass0_src7.ximg exists
[Fri Nov 25 23:19:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0606370801_pi300-10000_cl_pass0_src7.csv
[Fri Nov 25 23:19:47 2011] fullrun_mos1_xmm0606370801_pi300-10000_cl_pass0_src7_1.ximg exists
[Fri Nov 25 23:19:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0606370801_pi300-10000_cl_pass0_src7.csv
[Fri Nov 25 23:19:47 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0606370801_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0606370801_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Nov 25 23:19:47 2011] fullrun_mos1_xmm0606370801_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Fri Nov 25 23:19:47 2011] fullrun_mos1_xmm0606370801_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Nov 25 23:19:47 2011] Fit fullrun_mos1_xmm0606370801_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Fri Nov 25 23:41:27 2011] Spatial fit model total counts = 107.951000, observed total counts = 108.000000
[Fri Nov 25 23:41:27 2011] Offset between fit and detection position for source 11 = 0.163453 pixels
[Fri Nov 25 23:41:27 2011] 106.886900 total counts/ 79.487700 bgd. counts: snr = 3.073179
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.163453 pixels
  Position = (375.8, 220.9) = 1 32 17.74 30 25 52.6
  Extent = 5.9 (3.8-10.0)", rotation angle = 0
  Source counts = 27.4 +/- 10.3
  Background counts = 79.5
  Rate = 0.002 +/- 0.0007
[Fri Nov 25 23:41:27 2011] Vigneting correction estimate = 1.000000
[Fri Nov 25 23:41:27 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Nov 25 23:41:27 2011] Assessing source extent using major axis lower bound
[Fri Nov 25 23:41:27 2011] Source does appear to be extended
[Fri Nov 25 23:41:27 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 00:10:31 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Nov 26 00:10:31 2011] Initial guess for spatial extent in simple fitting = 5.86"
[Sat Nov 26 00:10:31 2011] source mask rpix=1.3, npix_max = 13, mask sum = 16, frac = 1.173
[Sat Nov 26 00:10:31 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 5.86"
[Sat Nov 26 00:28:33 2011] fullrun_mos1_xmm0606370801_pi300-10000_cl_pass1_src7.ximg exists
[Sat Nov 26 00:28:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0606370801_pi300-10000_cl_pass1_src7.csv
[Sat Nov 26 00:28:33 2011] fullrun_mos1_xmm0606370801_pi300-10000_cl_pass1_src7_1.ximg exists
[Sat Nov 26 00:28:33 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0606370801_pi300-10000_cl_pass1_src7.csv
[Sat Nov 26 00:28:33 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0606370801_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0606370801_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 00:28:33 2011] fullrun_mos1_xmm0606370801_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sat Nov 26 00:28:33 2011] fullrun_mos1_xmm0606370801_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sat Nov 26 00:28:33 2011] Fit fullrun_mos1_xmm0606370801_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Sat Nov 26 00:50:53 2011] Spatial fit model total counts = 101.443000, observed total counts = 102.000000
[Sat Nov 26 00:50:53 2011] Offset between fit and detection position for source 11 = 0.239107 pixels
[Sat Nov 26 00:50:53 2011] 100.639800 total counts/ 65.718800 bgd. counts: snr = 4.307664
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.239107 pixels
  Position = (375.8, 220.7) = 1 32 17.77 30 25 51.6
  Extent = 7.5 (4.1-11.3)", rotation angle = 0
  Source counts = 34.9 +/- 10.0
  Background counts = 65.7
  Rate = 0.002 +/- 0.0007
[Sat Nov 26 00:50:53 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 00:50:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 00:50:53 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 00:50:53 2011] Source does appear to be extended
[Sat Nov 26 00:50:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 01:16:56 2011] XMMSAS src. selection expression = ellipse(32642.152600, 19148.693200, 448.791013, 448.791013, 0.000000, X, Y)
[Sat Nov 26 01:16:56 2011] Writing source region out to fullrun_mos1_xmm0606370801_pi300-10000_pass1_cl_src11_src.reg
[Sat Nov 26 01:16:56 2011] Extracting stamp from image fullrun_mos1_xmm0606370801_pi300-10000_cl_sm2.00.img.gz, (350, 195) - (402, 246)
[Sat Nov 26 01:16:56 2011] XMMSAS bgd. selection expression = annulus(32642.152600, 19148.693200, 747.985022, 1495.970043, X, Y)
[Sat Nov 26 01:16:56 2011] Writing fullrun_mos1_xmm0606370801_pi300-10000_pass1_cl_src11.gif
[Sat Nov 26 01:20:23 2011] Mean detx,y = (-4947.15, 7493.81) 
[Sat Nov 26 01:20:24 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Nov 26 01:20:55 2011] Binned source spectrum to 10 counts/bin
[Sat Nov 26 01:20:56 2011] Setting source spectrum file to fullrun_mos1_xmm0606370801_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sat Nov 26 01:20:56 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0606370801_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sat Nov 26 01:26:00 2011] Not generating rmf since there are only 34 counts
[Sat Nov 26 01:26:00 2011] rmf not generated due to insufficient counts
[Sat Nov 26 01:40:00 2011] Updating aperture counts using extracted products
[Sat Nov 26 01:40:00 2011] Error reading totcts from fullrun_mos1_xmm0606370801_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sat Nov 26 01:40:00 2011] Calculating source flux in energy range 0.30-8.00
[Sat Nov 26 01:40:00 2011] Using photon index=1.80, rate=0.00239, arf fullrun_mos1_xmm0606370801_pi300-10000_pass1_cl_src11.arf
[Sat Nov 26 01:40:00 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Nov 26 01:40:00 2011] Updating source flux to 3.8e-14
[Sat Nov 26 01:40:03 2011] Source 11 has fewer than 100.000000 counts, skipping spectral fitting