[Sun Nov 27 02:18:17 2011] Detection parameters:
  Position = (153.4, 330.1) = 1 33 31.40 30 33 33.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 45.2 +/- 9.2
  Background counts = 8.9
  Rate = 0.003 +/- 0.0006

[Sun Nov 27 02:18:17 2011] Off-axis axis estimate = 10.76'
[Sun Nov 27 03:17:21 2011] Using EEF radius (= 11.81 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 03:17:21 2011] Initial guess for spatial extent in simple fitting = 11.81"
[Sun Nov 27 03:17:21 2011] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.016
[Sun Nov 27 03:17:21 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 11.81"
[Sun Nov 27 03:41:52 2011] fullrun_mos1_xmm0606370701_pi300-10000_cl_pass0_src9.ximg exists
[Sun Nov 27 03:41:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0606370701_pi300-10000_cl_pass0_src9.csv
[Sun Nov 27 03:41:52 2011] fullrun_mos1_xmm0606370701_pi300-10000_cl_pass0_src9_1.ximg exists
[Sun Nov 27 03:41:52 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0606370701_pi300-10000_cl_pass0_src9.csv
[Sun Nov 27 03:41:52 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0606370701_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0606370701_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 03:41:52 2011] fullrun_mos1_xmm0606370701_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sun Nov 27 03:41:52 2011] fullrun_mos1_xmm0606370701_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sun Nov 27 03:41:52 2011] Fit fullrun_mos1_xmm0606370701_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Sun Nov 27 04:18:35 2011] Source 8 is offset by -2.097771 and 7.506660 pixels which is larger than
2 X fitted extent = 1.380699 x 1.380699, not incorporating fit results
[Sun Nov 27 04:18:35 2011] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 15.079771 pixels away
[Sun Nov 27 04:18:35 2011] Vigneting correction estimate = 1.000000
[Sun Nov 27 04:18:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov 27 04:18:35 2011] Assessing source extent using major
[Sun Nov 27 04:18:35 2011] Source does appear to be extended
[Sun Nov 27 04:18:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 05:03:53 2011] Using EEF radius (= 11.81 ")to estimate initial spatial extent for simple fitting
[Sun Nov 27 05:03:53 2011] Initial guess for spatial extent in simple fitting = 11.81"
[Sun Nov 27 05:03:53 2011] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.016
[Sun Nov 27 05:03:53 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 11.81"
[Sun Nov 27 05:32:51 2011] fullrun_mos1_xmm0606370701_pi300-10000_cl_pass1_src9.ximg exists
[Sun Nov 27 05:32:51 2011] fullrun_mos1_xmm0606370701_pi300-10000_cl_pass1_src9_1.ximg exists
[Sun Nov 27 05:32:51 2011] Fit fullrun_mos1_xmm0606370701_pi300-10000_cl_pass1_src9 appears to have run properly
[Sun Nov 27 05:32:51 2011] fullrun_mos1_xmm0606370701_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sun Nov 27 05:32:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0606370701_pi300-10000_cl_pass1_tfrozen_src9.csv
[Sun Nov 27 05:32:51 2011] fullrun_mos1_xmm0606370701_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sun Nov 27 05:32:51 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0606370701_pi300-10000_cl_pass1_tfrozen_src9.csv
[Sun Nov 27 05:32:51 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0606370701_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0606370701_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Nov 27 06:08:06 2011] Source 8 is offset by -2.097771 and 7.506660 pixels which is larger than
2 X fitted extent = 1.380699 x 1.380699, not incorporating fit results
[Sun Nov 27 06:08:06 2011] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 15.314929 pixels away
[Sun Nov 27 06:08:06 2011] Vigneting correction estimate = 1.000000
[Sun Nov 27 06:08:06 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Nov 27 06:08:06 2011] Assessing source extent using major
[Sun Nov 27 06:08:06 2011] Source does appear to be extended
[Sun Nov 27 06:08:06 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Nov 27 07:04:19 2011] XMMSAS src. selection expression = ellipse(13301.459900, 28666.045410, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Nov 27 07:04:19 2011] Writing source region out to fullrun_mos1_xmm0606370701_pi300-10000_pass1_cl_src8_src.reg
[Sun Nov 27 07:04:19 2011] Extracting stamp from image fullrun_mos1_xmm0606370701_pi300-10000_cl_sm2.00.img.gz, (116, 293) - (191, 368)
[Sun Nov 27 07:04:19 2011] XMMSAS bgd. selection expression = annulus(13301.459900, 28666.045410, 1087.500000, 2175.000000, X, Y) && !ellipse(12560.791687, 27021.143250, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Nov 27 07:04:19 2011] Writing fullrun_mos1_xmm0606370701_pi300-10000_pass1_cl_src8.gif
[Sun Nov 27 07:09:17 2011] Mean detx,y = (-1380.94, -14273.88) 
[Sun Nov 27 07:09:19 2011] Setting backscal keywords in source and bgd. spectrum
[Sun Nov 27 07:09:40 2011] Binned source spectrum to 10 counts/bin
[Sun Nov 27 07:09:40 2011] Setting source spectrum file to fullrun_mos1_xmm0606370701_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sun Nov 27 07:09:40 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0606370701_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Sun Nov 27 07:23:20 2011] Not generating rmf since there are only 45 counts
[Sun Nov 27 07:23:20 2011] rmf not generated due to insufficient counts
[Sun Nov 27 07:43:30 2011] Updating aperture counts using extracted products
[Sun Nov 27 07:43:30 2011] Error reading totcts from fullrun_mos1_xmm0606370701_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sun Nov 27 07:43:31 2011] Calculating source flux in energy range 0.30-8.00
[Sun Nov 27 07:43:31 2011] Using photon index=1.80, rate=0.00291, arf fullrun_mos1_xmm0606370701_pi300-10000_pass1_cl_src8.arf
[Sun Nov 27 07:43:31 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Nov 27 07:43:31 2011] Updating source flux to 7.9e-14
[Sun Nov 27 07:43:34 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting