[Mon Dec 19 10:27:54 2011] Detection parameters:
  Position = (489.1, 382.1) = 1 31 39.25 30 37 33.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 244.9 +/- 20.9
  Background counts = 32.3
  Rate = 0.008 +/- 0.0007

[Mon Dec 19 10:27:55 2011] Off-axis axis estimate = 15.09'
[Mon Dec 19 11:20:10 2011] Using EEF radius (= 13.97 ")to estimate initial spatial extent for simple fitting
[Mon Dec 19 11:20:10 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Dec 19 11:20:10 2011] Initial guess for spatial extent in simple fitting = 13.97"
[Mon Dec 19 11:20:10 2011] source mask rpix=3.2, npix_max = 55, mask sum = 64, frac = 1.161
[Mon Dec 19 11:20:10 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 13.97"
[Mon Dec 19 11:41:13 2011] fullrun_mos2_xmm0606370601_pi300-10000_cl_pass0_src6.ximg exists
[Mon Dec 19 11:41:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0606370601_pi300-10000_cl_pass0_src6.csv
[Mon Dec 19 11:41:13 2011] fullrun_mos2_xmm0606370601_pi300-10000_cl_pass0_src6_1.ximg exists
[Mon Dec 19 11:41:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0606370601_pi300-10000_cl_pass0_src6.csv
[Mon Dec 19 11:41:13 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0606370601_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0606370601_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 11:41:14 2011] fullrun_mos2_xmm0606370601_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Mon Dec 19 11:41:14 2011] fullrun_mos2_xmm0606370601_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Mon Dec 19 11:41:14 2011] Fit fullrun_mos2_xmm0606370601_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Mon Dec 19 11:41:26 2011] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 12.321657 pixels away
[Mon Dec 19 11:41:26 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 11:41:26 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 11:41:26 2011] Assessing source extent using major
[Mon Dec 19 11:41:26 2011] Source does appear to be extended
[Mon Dec 19 11:41:26 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 12:28:20 2011] Using EEF radius (= 13.97 ")to estimate initial spatial extent for simple fitting
[Mon Dec 19 12:28:20 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Dec 19 12:28:20 2011] Initial guess for spatial extent in simple fitting = 13.97"
[Mon Dec 19 12:28:20 2011] source mask rpix=3.2, npix_max = 55, mask sum = 64, frac = 1.161
[Mon Dec 19 12:28:20 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 13.97"
[Mon Dec 19 12:47:44 2011] fullrun_mos2_xmm0606370601_pi300-10000_cl_pass1_src5.ximg exists
[Mon Dec 19 12:47:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0606370601_pi300-10000_cl_pass1_src5.csv
[Mon Dec 19 12:47:44 2011] fullrun_mos2_xmm0606370601_pi300-10000_cl_pass1_src5_1.ximg exists
[Mon Dec 19 12:47:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0606370601_pi300-10000_cl_pass1_src5.csv
[Mon Dec 19 12:47:44 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0606370601_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0606370601_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 12:47:44 2011] fullrun_mos2_xmm0606370601_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Mon Dec 19 12:47:44 2011] fullrun_mos2_xmm0606370601_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Mon Dec 19 12:47:44 2011] Fit fullrun_mos2_xmm0606370601_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Mon Dec 19 12:47:55 2011] Spatial fit model total counts = 358.836000, observed total counts = 359.000000
[Mon Dec 19 12:47:55 2011] Offset between fit and detection position for source 3 = 0.441077 pixels
[Mon Dec 19 12:47:55 2011] 361.222000 total counts/ 213.838000 bgd. counts: snr = 10.078778
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.441077 pixels
  Position = (488.6, 382.1) = 1 31 39.40 30 37 33.5
  Extent = 5.4 (4.5-6.5)", rotation angle = 0
  Source counts = 147.4 +/- 19.0
  Background counts = 213.8
  Rate = 0.005 +/- 0.0007
[Mon Dec 19 12:47:55 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 12:47:55 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 12:47:55 2011] Assessing source extent using major axis lower bound
[Mon Dec 19 12:47:55 2011] Source does appear to be extended
[Mon Dec 19 12:47:55 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 14:00:33 2011] XMMSAS src. selection expression = ellipse(42461.283900, 33192.698000, 322.113609, 322.113609, 0.000000, X, Y)
[Mon Dec 19 14:00:33 2011] Writing source region out to fullrun_mos2_xmm0606370601_pi300-10000_pass1_cl_src3_src.reg
[Mon Dec 19 14:00:33 2011] Extracting stamp from image fullrun_mos2_xmm0606370601_pi300-10000_cl_sm2.00.img.gz, (470, 364) - (507, 401)
[Mon Dec 19 14:00:33 2011] XMMSAS bgd. selection expression = annulus(42461.283900, 33192.698000, 536.856015, 1073.712031, X, Y)
[Mon Dec 19 14:00:33 2011] Writing fullrun_mos2_xmm0606370601_pi300-10000_pass1_cl_src3.gif
[Mon Dec 19 14:04:46 2011] Mean detx,y = (-11620.40, 11120.04) 
[Mon Dec 19 14:04:47 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 19 14:04:57 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 19 14:04:58 2011] Setting source spectrum file to fullrun_mos2_xmm0606370601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Dec 19 14:04:58 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0606370601_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon Dec 19 14:16:52 2011] Updating aperture counts using extracted products
[Mon Dec 19 14:16:52 2011] Error reading totcts from fullrun_mos2_xmm0606370601_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Dec 19 14:16:52 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 19 14:16:52 2011] Using photon index=1.80, rate=0.00529, arf fullrun_mos2_xmm0606370601_pi300-10000_pass1_cl_src3.arf
[Mon Dec 19 14:16:52 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 19 14:16:52 2011] Updating source flux to 2.2e-13