[Wed Oct  5 02:25:40 2011] Detection parameters:
  Position = (303.0, 321.2) = 12 3 9.75 44 31 53.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 360081.6 +/- 667.4
  Background counts = 417.6
  Rate = 1e+01 +/- 0.02

[Wed Oct  5 02:25:40 2011] Off-axis axis estimate = 1.68'
[Wed Oct  5 02:37:07 2011] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 02:37:07 2011] Initial guess for spatial extent in simple fitting = 7.27"
[Wed Oct  5 02:37:07 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.848
[Wed Oct  5 02:37:07 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Wed Oct  5 02:50:44 2011] fullrun_pn_xmm0606322301_pi300-10000_cl_pass0_src1.ximg exists
[Wed Oct  5 02:50:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0606322301_pi300-10000_cl_pass0_src1.csv
[Wed Oct  5 02:50:44 2011] fullrun_pn_xmm0606322301_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Oct  5 02:50:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0606322301_pi300-10000_cl_pass0_src1.csv
[Wed Oct  5 02:50:44 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0606322301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0606322301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 02:50:44 2011] fullrun_pn_xmm0606322301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Oct  5 02:50:44 2011] fullrun_pn_xmm0606322301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Oct  5 02:50:44 2011] Fit fullrun_pn_xmm0606322301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Oct  5 04:08:28 2011] Spatial fit model total counts = 306450.000000, observed total counts = 324618.000000
[Wed Oct  5 04:08:28 2011] Offset between fit and detection position for source 1 = 0.223662 pixels
[Wed Oct  5 04:08:28 2011] 306325.000000 total counts/ 25600.000000 bgd. counts: snr = 1754.531250
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.223662 pixels
  Position = (302.9, 321.4) = 12 3 9.80 44 31 52.7
  Extent = 6.5 (6.5-6.5)", rotation angle = 0
  Source counts = 280725.0 +/- 553.5
  Background counts = 25600.0
  Rate = 7 +/- 0.01
[Wed Oct  5 04:08:28 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 04:08:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 04:08:28 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 04:08:28 2011] Source does appear to be extended
[Wed Oct  5 04:08:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 04:08:38 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 04:08:38 2011] Initial guess for spatial extent in simple fitting = 6.48"
[Wed Oct  5 04:08:38 2011] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.010
[Wed Oct  5 04:08:38 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 6.48"
[Wed Oct  5 04:21:37 2011] fullrun_pn_xmm0606322301_pi300-10000_cl_pass1_src1.ximg exists
[Wed Oct  5 04:21:37 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0606322301_pi300-10000_cl_pass1_src1.csv
[Wed Oct  5 04:21:37 2011] fullrun_pn_xmm0606322301_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Oct  5 04:21:37 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0606322301_pi300-10000_cl_pass1_src1.csv
[Wed Oct  5 04:21:37 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0606322301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0606322301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 04:21:37 2011] fullrun_pn_xmm0606322301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Oct  5 04:21:37 2011] fullrun_pn_xmm0606322301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Oct  5 04:21:37 2011] Fit fullrun_pn_xmm0606322301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Oct  5 04:50:18 2011] Spatial fit model total counts = 305848.000000, observed total counts = 323540.000000
[Wed Oct  5 04:50:18 2011] Offset between fit and detection position for source 1 = 0.008307 pixels
[Wed Oct  5 04:50:18 2011] 305994.000000 total counts/ 25600.000000 bgd. counts: snr = 1752.462500
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.008307 pixels
  Position = (302.9, 321.4) = 12 3 9.80 44 31 52.7
  Extent = 6.5 (6.4-6.5)", rotation angle = 0
  Source counts = 280394.0 +/- 553.2
  Background counts = 25600.0
  Rate = 7 +/- 0.01
[Wed Oct  5 04:50:18 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 04:50:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 04:50:18 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 04:50:18 2011] Source does appear to be extended
[Wed Oct  5 04:50:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 04:50:25 2011] Counts = 280394.000000, rescaling region sizes by 3.000000
[Wed Oct  5 04:50:25 2011] XMMSAS src. selection expression = ellipse(26302.019600, 27914.245200, 1163.350102, 1163.350102, 0.000000, X, Y)
[Wed Oct  5 04:50:25 2011] Writing source region out to fullrun_pn_xmm0606322301_pi300-10000_pass1_cl_src1_src.reg
[Wed Oct  5 04:50:25 2011] Extracting stamp from image fullrun_pn_xmm0606322301_pi300-10000_cl_sm2.00.img.gz, (236, 255) - (370, 388)
[Wed Oct  5 04:50:25 2011] XMMSAS bgd. selection expression = annulus(26302.019600, 27914.245200, 5816.750508, 11633.501016, X, Y) && !ellipse(28611.712891, 29337.866058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27293.618286, 25454.529938, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27503.448000, 24966.776000, 1125.448032, 1125.448032, 0.000000, X, Y) && !ellipse(27820.819000, 24050.149442, 754.306422, 754.306422, 0.000000, X, Y)
[Wed Oct  5 04:50:25 2011] Writing fullrun_pn_xmm0606322301_pi300-10000_pass1_cl_src1.gif
[Wed Oct  5 04:53:43 2011] Mean detx,y = (33.41, -227.02) 
[Wed Oct  5 04:53:52 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Oct  5 04:56:10 2011] Binned source spectrum to 10 counts/bin
[Wed Oct  5 04:56:10 2011] Setting source spectrum file to fullrun_pn_xmm0606322301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Oct  5 04:56:10 2011] Setting bgd. spectrum file to fullrun_pn_xmm0606322301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Oct  5 06:39:53 2011] Updating aperture counts using extracted products
[Wed Oct  5 06:39:53 2011] Error reading totcts from fullrun_pn_xmm0606322301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Oct  5 06:39:53 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 06:39:53 2011] Using photon index=1.80, rate=6.68, arf fullrun_pn_xmm0606322301_pi300-10000_pass1_cl_src1.arf
[Wed Oct  5 06:39:53 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Oct  5 06:39:54 2011] Updating source flux to 1.6e-11
[Wed Oct  5 06:41:19 2011] Reading fit data from xmm0606322301/analysis//spectral/fullrun_pn_xmm0606322301_pi300-10000_pass1_cl_src1_pl.csv
[Wed Oct  5 06:41:19 2011] Spectral fit parameter nH value = 9.63457e+13
[Wed Oct  5 06:41:19 2011] Spectral fit parameter PhoIndex value = 2.78388
[Wed Oct  5 06:41:19 2011] Failed to get F(0.3-8.0) from xmm0606322301/analysis//spectral/fullrun_pn_xmm0606322301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Oct  5 06:41:19 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 06:41:19 2011] Using Nh = 9.6e+13, photon index=2.78, rate=6.68, arf fullrun_pn_xmm0606322301_pi300-10000_pass1_cl_src1.arf
[Wed Oct  5 06:41:19 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Oct  5 06:41:19 2011] Updating source flux to 1e-11