[Wed Oct  5 08:06:03 2011] Detection parameters:
  Position = (392.1, 427.2) = 12 2 32.77 44 39 29.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 298.1 +/- 27.3
  Background counts = 143.8
  Rate = 0.01 +/- 0.001

[Wed Oct  5 08:06:03 2011] Off-axis axis estimate = 11.54'
[Wed Oct  5 09:11:23 2011] Using EEF radius (= 12.20 ")to estimate initial spatial extent for simple fitting
[Wed Oct  5 09:11:23 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Oct  5 09:11:23 2011] Initial guess for spatial extent in simple fitting = 12.20"
[Wed Oct  5 09:11:23 2011] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.824
[Wed Oct  5 09:11:23 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 12.20"
[Wed Oct  5 09:24:22 2011] fullrun_mos1_xmm0606322201_pi300-10000_cl_pass0_src3.ximg exists
[Wed Oct  5 09:24:22 2011] fullrun_mos1_xmm0606322201_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Oct  5 09:24:22 2011] Fit fullrun_mos1_xmm0606322201_pi300-10000_cl_pass0_src3 appears to have run properly
[Wed Oct  5 09:24:22 2011] fullrun_mos1_xmm0606322201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Oct  5 09:24:22 2011] fullrun_mos1_xmm0606322201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Oct  5 09:24:22 2011] Fit fullrun_mos1_xmm0606322201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Oct  5 10:28:49 2011] Spatial fit model total counts = 452.636000, observed total counts = 453.000000
[Wed Oct  5 10:28:49 2011] Offset between fit and detection position for source 5 = 0.228772 pixels
[Wed Oct  5 10:28:49 2011] 446.645000 total counts/ 301.644000 bgd. counts: snr = 8.348792
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.228772 pixels
  Position = (392.0, 427.3) = 12 2 32.83 44 39 29.6
  Extent = 5.5 (4.7-6.5)", rotation angle = 0
  Source counts = 145.0 +/- 21.1
  Background counts = 301.6
  Rate = 0.005 +/- 0.0007
[Wed Oct  5 10:28:49 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 10:28:49 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 10:28:49 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 10:28:49 2011] Source does appear to be extended
[Wed Oct  5 10:28:49 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 12:33:08 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Oct  5 12:33:08 2011] Initial guess for spatial extent in simple fitting = 5.48"
[Wed Oct  5 12:33:08 2011] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.968
[Wed Oct  5 12:33:08 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 5.48"
[Wed Oct  5 12:46:53 2011] fullrun_mos1_xmm0606322201_pi300-10000_cl_pass1_src3.ximg exists
[Wed Oct  5 12:46:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0606322201_pi300-10000_cl_pass1_src3.csv
[Wed Oct  5 12:46:53 2011] fullrun_mos1_xmm0606322201_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Oct  5 12:46:53 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0606322201_pi300-10000_cl_pass1_src3.csv
[Wed Oct  5 12:46:53 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0606322201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0606322201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Oct  5 12:46:53 2011] fullrun_mos1_xmm0606322201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Oct  5 12:46:53 2011] fullrun_mos1_xmm0606322201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Oct  5 12:46:53 2011] Fit fullrun_mos1_xmm0606322201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Oct  5 13:10:11 2011] Spatial fit model total counts = 416.717000, observed total counts = 418.000000
[Wed Oct  5 13:10:11 2011] Offset between fit and detection position for source 5 = 0.008411 pixels
[Wed Oct  5 13:10:11 2011] 410.705000 total counts/ 268.480000 bgd. counts: snr = 8.680005
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.008411 pixels
  Position = (392.0, 427.4) = 12 2 32.83 44 39 29.6
  Extent = 5.4 (4.6-6.5)", rotation angle = 0
  Source counts = 142.2 +/- 20.3
  Background counts = 268.5
  Rate = 0.005 +/- 0.0007
[Wed Oct  5 13:10:11 2011] Vigneting correction estimate = 1.000000
[Wed Oct  5 13:10:11 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Oct  5 13:10:11 2011] Assessing source extent using major axis lower bound
[Wed Oct  5 13:10:11 2011] Source does appear to be extended
[Wed Oct  5 13:10:11 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Oct  5 21:15:17 2011] XMMSAS src. selection expression = ellipse(34053.990892, 37131.182400, 324.524409, 324.524409, 0.000000, X, Y)
[Wed Oct  5 21:15:17 2011] Writing source region out to fullrun_mos1_xmm0606322201_pi300-10000_pass1_cl_src5_src.reg
[Wed Oct  5 21:15:17 2011] Extracting stamp from image fullrun_mos1_xmm0606322201_pi300-10000_cl_sm2.00.img.gz, (373, 409) - (411, 446)
[Wed Oct  5 21:15:17 2011] XMMSAS bgd. selection expression = annulus(34053.990892, 37131.182400, 540.874016, 1081.748031, X, Y)
[Wed Oct  5 21:15:17 2011] Writing fullrun_mos1_xmm0606322201_pi300-10000_pass1_cl_src5.gif
[Wed Oct  5 21:19:22 2011] Mean detx,y = (5317.93, 10743.74) 
[Wed Oct  5 21:19:23 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Oct  5 21:19:29 2011] Binned source spectrum to 10 counts/bin
[Wed Oct  5 21:19:30 2011] Setting source spectrum file to fullrun_mos1_xmm0606322201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Oct  5 21:19:30 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0606322201_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Wed Oct  5 22:33:03 2011] Updating aperture counts using extracted products
[Wed Oct  5 22:33:03 2011] Error reading totcts from fullrun_mos1_xmm0606322201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Wed Oct  5 22:33:03 2011] Calculating source flux in energy range 0.30-8.00
[Wed Oct  5 22:33:03 2011] Using photon index=1.80, rate=0.00483, arf fullrun_mos1_xmm0606322201_pi300-10000_pass1_cl_src5.arf
[Wed Oct  5 22:33:03 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Oct  5 22:33:03 2011] Updating source flux to 1.1e-13