[Wed Nov 30 17:45:56 2011] Detection parameters:
  Position = (301.5, 321.7) = 12 3 9.50 44 31 53.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 85957.0 +/- 347.3
  Background counts = 914.3
  Rate = 3 +/- 0.01

[Wed Nov 30 17:45:56 2011] Off-axis axis estimate = 1.70'
[Wed Nov 30 17:46:15 2011] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Wed Nov 30 17:46:15 2011] Initial guess for spatial extent in simple fitting = 7.28"
[Wed Nov 30 17:46:15 2011] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.058
[Wed Nov 30 17:46:15 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Wed Nov 30 17:46:16 2011] fullrun_pn_xmm0606322101_pi300-10000_cl_pass0_src1.ximg exists
[Wed Nov 30 17:46:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0606322101_pi300-10000_cl_pass0_src1.csv
[Wed Nov 30 17:46:16 2011] fullrun_pn_xmm0606322101_pi300-10000_cl_pass0_src1_1.ximg exists
[Wed Nov 30 17:46:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0606322101_pi300-10000_cl_pass0_src1.csv
[Wed Nov 30 17:46:16 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0606322101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0606322101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 17:46:16 2011] fullrun_pn_xmm0606322101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Wed Nov 30 17:46:16 2011] fullrun_pn_xmm0606322101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Wed Nov 30 17:46:16 2011] Fit fullrun_pn_xmm0606322101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Wed Nov 30 17:46:22 2011] Spatial fit model total counts = 85971.900000, observed total counts = 85972.000000
[Wed Nov 30 17:46:22 2011] Offset between fit and detection position for source 1 = 0.197309 pixels
[Wed Nov 30 17:46:22 2011] 85951.100000 total counts/ 24835.900000 bgd. counts: snr = 387.801323
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.197309 pixels
  Position = (301.4, 321.6) = 12 3 9.54 44 31 52.7
  Extent = 5.7 (5.6-5.7)", rotation angle = 0
  Source counts = 61115.2 +/- 293.2
  Background counts = 24835.9
  Rate = 2 +/- 0.008
[Wed Nov 30 17:46:22 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 17:46:22 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 17:46:22 2011] Assessing source extent using major axis lower bound
[Wed Nov 30 17:46:22 2011] Source does appear to be extended
[Wed Nov 30 17:46:22 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 17:46:38 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Nov 30 17:46:38 2011] Initial guess for spatial extent in simple fitting = 5.69"
[Wed Nov 30 17:46:38 2011] source mask rpix=1.3, npix_max = 13, mask sum = 9, frac = 0.689
[Wed Nov 30 17:46:38 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.69"
[Wed Nov 30 17:46:39 2011] fullrun_pn_xmm0606322101_pi300-10000_cl_pass1_src1.ximg exists
[Wed Nov 30 17:46:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0606322101_pi300-10000_cl_pass1_src1.csv
[Wed Nov 30 17:46:39 2011] fullrun_pn_xmm0606322101_pi300-10000_cl_pass1_src1_1.ximg exists
[Wed Nov 30 17:46:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0606322101_pi300-10000_cl_pass1_src1.csv
[Wed Nov 30 17:46:39 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0606322101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0606322101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Nov 30 17:46:39 2011] fullrun_pn_xmm0606322101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Wed Nov 30 17:46:39 2011] fullrun_pn_xmm0606322101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Wed Nov 30 17:46:39 2011] Fit fullrun_pn_xmm0606322101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Wed Nov 30 17:46:46 2011] Spatial fit model total counts = 86442.600000, observed total counts = 86430.000000
[Wed Nov 30 17:46:46 2011] Offset between fit and detection position for source 1 = 0.012878 pixels
[Wed Nov 30 17:46:46 2011] 86692.200000 total counts/ 25445.500000 bgd. counts: snr = 383.952234
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.012878 pixels
  Position = (301.4, 321.6) = 12 3 9.54 44 31 52.7
  Extent = 5.7 (5.7-5.7)", rotation angle = 0
  Source counts = 61246.7 +/- 294.4
  Background counts = 25445.5
  Rate = 2 +/- 0.008
[Wed Nov 30 17:46:46 2011] Vigneting correction estimate = 1.000000
[Wed Nov 30 17:46:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Nov 30 17:46:46 2011] Assessing source extent using major axis lower bound
[Wed Nov 30 17:46:46 2011] Source does appear to be extended
[Wed Nov 30 17:46:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Nov 30 17:47:02 2011] Counts = 61246.700000, rescaling region sizes by 3.000000
[Wed Nov 30 17:47:02 2011] XMMSAS src. selection expression = ellipse(26174.280600, 27926.860600, 1025.719230, 1025.719230, 0.000000, X, Y)
[Wed Nov 30 17:47:02 2011] Not overwriting source region fullrun_pn_xmm0606322101_pi300-10000_pass1_cl_src1_src.reg
[Wed Nov 30 17:47:02 2011] Extracting stamp from image fullrun_pn_xmm0606322101_pi300-10000_cl_sm2.00.img.gz, (242, 263) - (360, 381)
[Wed Nov 30 17:47:02 2011] XMMSAS bgd. selection expression = annulus(26174.280600, 27926.860600, 5128.596148, 10257.192295, X, Y) && !ellipse(27095.870000, 28883.691071, 1217.264035, 820.487835, 355.482887, X, Y) && !ellipse(27740.360000, 29198.326000, 1239.672036, 1239.672036, 0.000000, X, Y) && !ellipse(27532.148773, 28238.718445, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24606.919800, 27602.430054, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28160.558000, 29477.894000, 1272.704037, 1272.704037, 0.000000, X, Y) && !ellipse(27497.770200, 25225.810400, 1143.984033, 390.786411, 67.254262, X, Y)
[Wed Nov 30 17:47:02 2011] Writing fullrun_pn_xmm0606322101_pi300-10000_pass1_cl_src1.gif
[Wed Nov 30 17:47:02 2011] ../../xmm0606322101/products/events/fullrun_pn_xmm0606322101_pi300-10000_pass1_cl_src1_src.evt and ../../xmm0606322101/products/events/fullrun_pn_xmm0606322101_pi300-10000_pass1_cl_src1_bgd.evt exist, delete to re-create
[Wed Nov 30 17:47:04 2011] Mean detx,y = (67.94, -196.75) 
[Wed Nov 30 17:47:04 2011] ../../xmm0606322101/products/images/fullrun_pn_xmm0606322101_pi300-10000_pass1_cl_src1_src.img and ../../xmm0606322101/products/images/fullrun_pn_xmm0606322101_pi300-10000_pass1_cl_src1_bgd.img exist, delete to re-create
[Wed Nov 30 17:47:04 2011] ../../xmm0606322101/products/spectra/fullrun_pn_xmm0606322101_pi300-10000_pass1_cl_src1_src_b10.pi.gz and ../../xmm0606322101/products/spectra/fullrun_pn_xmm0606322101_pi300-10000_pass1_cl_src1_bgd.pi exist, delete to re-create
[Wed Nov 30 17:47:04 2011] Setting source spectrum file to fullrun_pn_xmm0606322101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Nov 30 17:47:04 2011] Setting bgd. spectrum file to fullrun_pn_xmm0606322101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Wed Nov 30 17:47:04 2011] ../../xmm0606322101/products/lightcurves/fullrun_pn_xmm0606322101_pi300-10000_pass1_cl_src1_src.lc and ../../xmm0606322101/products/lightcurves/fullrun_pn_xmm0606322101_pi300-10000_pass1_cl_src1_bgd.lc exist, delete to re-create
[Wed Nov 30 17:47:16 2011] fullrun_pn_xmm0606322101_pi300-10000_pass1_cl_src1.rmf exists, delete to re-create
[Wed Nov 30 17:47:16 2011] fullrun_pn_xmm0606322101_pi300-10000_pass1_cl_src1.arf exists, delete to re-create
[Wed Nov 30 17:47:59 2011] Updating aperture counts using extracted products
[Wed Nov 30 17:47:59 2011] Error reading totcts from fullrun_pn_xmm0606322101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Nov 30 17:47:59 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 17:47:59 2011] Using photon index=1.80, rate=1.63, arf fullrun_pn_xmm0606322101_pi300-10000_pass1_cl_src1.arf
[Wed Nov 30 17:47:59 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 17:47:59 2011] Updating source flux to 3.9e-12
[Wed Nov 30 17:48:06 2011] Reading fit data from xmm0606322101/analysis//spectral/fullrun_pn_xmm0606322101_pi300-10000_pass1_cl_src1_pl.csv
[Wed Nov 30 17:48:06 2011] Spectral fit parameter nH value = 837120000000.0
[Wed Nov 30 17:48:06 2011] Spectral fit parameter PhoIndex value = 2.4559
[Wed Nov 30 17:48:06 2011] Failed to get F(0.3-8.0) from xmm0606322101/analysis//spectral/fullrun_pn_xmm0606322101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Wed Nov 30 17:48:06 2011] Calculating source flux in energy range 0.30-8.00
[Wed Nov 30 17:48:06 2011] Using Nh = 8.4e+11, photon index=2.46, rate=1.63, arf fullrun_pn_xmm0606322101_pi300-10000_pass1_cl_src1.arf
[Wed Nov 30 17:48:06 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Nov 30 17:48:06 2011] Updating source flux to 2.7e-12